Volume V Issue VII

Effect of Internal Energy on Specific Heat of Cuprates using s-Wave and d-Wave Hybrid Model

Andrew Munyasia Wanyonyi, Michael Nakitare Waswa, John W Makokha
July 2020
Page No.: 01-04

The observation of an exponential decay of the specific heat at low temperatures shows that specific heat (Cv) of cuprates depend on the energy spectrum of a superconductor. This means that devising ways of varying internal energy of a system without necessarily varying temperature can help achieve room temperature superconductivity. In this paper, the relationship between internal energy and specific heat is investigated using a Hamiltonian generated from a Hybrid of s-wave and d-wave. The Hamiltonian was diagonalized by Bogoliubov-Valatin (BVT) formalism and used to analyze specific heat of Bismuth cuprates. The graph of Cv versus temperature was a skewed Gaussian shaped curve. Maximum Cv was observed at Tc (32 K, 94 K and 108 K) respectively as 2750 eV/K, for Bi-2201, Bi-2212 and Bi-2223. Increasing the number of copper oxide layers can therefore help increase binding energy and increase the temperature at which maximum Cv of the system is attained, a prerequisite for attaining high transition temperature (Tc). As a consequence, room temperature superconductivity can be achieved by varying the binding energy (increasing copper oxide planes) in a lattice of a cuprate superconductor.

Page(s): 01-04

Date of Publication: 19 July 2020

Andrew Munyasia Wanyonyi
Department of Science, Technology and Engineering, Kibabii University, Bungoma, Kenya
Michael Nakitare Waswa
Department of Science, Technology and Engineering, Kibabii University, Bungoma, Kenya
John W Makokha
Department of Science, Technology and Engineering, Kibabii University, Bungoma, Kenya

References

[1]. Yan-Feng, L.v., Wen-Lin, W., Hao, D., Yang, W., Ying, D., Ruidan, Z., Schneeloch, G. D., Gu, L., Wang, K. H., Shuai-Hua, J., Lin, Z., Xing-Jiang, Z., Can-Li, S., Xu-Cun, M., and Qi-Kun, X. (2016). Electronic structure of the ingredient planes of the cuprate superconductor Bi2Sr2CuO6+δ: A comparison study with Bi₂Sr₂CaCu₂O8+δ. Phys. Rev. B 93, 1-4.
[2]. Lusamamba. M.S., Sakwa .T.W and Odhiambo .O.J., (2018). Heat And Entropy Of A Mixture Of Helium Isotopes. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 8853-8856.Technology (JMEST), 721-723.
[3]. Waswa.M.N, Ayodo.K.Y., Sakwa. T. W and Ndinya. B.,. (2017). Doped Mott Insulators within the Strong Coupling Regime. International Journal of Recent Engineering Research and Development (IJRERD) , 102-106.
[4]. Dominik. M, Todd H. and Christian B. (2002). Approximate tight-binding sum rule for the superconductivity relatedchange of c-axis kinetic energy in multilayer cuprate superconductors. cond-mat.supr-con , 1-8.
[5]. Kaminski .A, Mesot .J, Fretwell .H, Campuzano J.C, Norman M.R, Randeria .M, Ding .H, Sato .T, Takahashi .T, Mochiku .T, Kadowaki .K, and Hoechst. H., (1999). Quasi particles in the superconducting state of Bi2Sr2CaCu2O8+δ. arXiv:cond-mat/9904390v2 [cond-mat.supr-con] , 1-4.
[6]. Hague J. P. (2005). d-wave superconductivity from eletron-phonon interactions. Dept. of Physics and Astronomy, University of Leicester and Dept. of Physics, University of Loughborough, 1-4.
[7]. Waswa M.N.,Yudah K.A.,Thomas W.S. and Boniface N. (2017). Specific Heat of Doped High-TC Cuprate Superconductors within the Bose-Fermi Hubbard Model. Journal of Multidisciplinary Engineering Science and Technology (JMEST)
[8]. Szcze˛s´niak R. (2012). Pairing Mechanism for the High-TC Superconductivity: Symmetries and Thermodynamic Properties. Open access library, 1-13.
[9]. Odhiambo J. O., Sakwa T. W., Rapando B.W., and Ayodo Y. K. (2016). Thermodynamic properties of Mercury based cuprate due to Cooper pair - electron interaction. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 3(7), 1-8.
[10]. Levallois. J,Tran. M .K., Pouliot . D.,Presura. C.N., Greene. L.H., Eckstein. J.N., Uccelli.J., Giannini. E., Gu. D. G., Leggett. A.J., and Van der Marel. D., (2016). Temperature-Dependent Ellipsometry Measurements of Partial Coulomb Energy in Superconducting Cuprates. Physical review x 6, 031027, 1-21
[11]. Maslov. D. L, (2014). Electron-electron interaction and the Fermi-liquid theory. Department of Physics, University of Florida , 14-25.
[12]. Carlson E.W, Emery V.J, Kivelson .S.A, Orgad .D . (n.d.). Concepts in High Temperature Superconductivity. Cond-mat/0206217 , 2-15.
[13]. Ingosi, A.,Wafula, H.,Sakwa, T., and Eyinda, H.,. (2018). Thermodynamic Properties of YBCO-123 superconducting materials with S-wave and P-wave Singlet Admixture. JMESTN-8790 , 1-7.
[14]. Fernandez, M., Rafael, M. (2016). BCS theory of superconductivity. Lecture notes , 1-2.
[15]. Werner. P., Casula. M., Miyake. T., Ferdi. A., Millis .A.J and Silke.B., (2011). Satellites and Large doping- and temperature dependance of electronicproperties in hole-doped BaFe2As2. . Nanosystem Research Institute (NRI),1-10.
[16]. Kibe H.E., Sakwa T.W. and Khanna K. M .,(2017). Specific Heat Of The Integrated S-Wave And P-Wave Pairing In Uranium And Cerium Based Heavy- Fermion Superconductors . Open Acces, 2-5.
[17]. Rapando, B.W., Sakwa, T., Khanna, K.M, Tonui, J.K., Mugoro, K.M., Kibe, H., Oyodo, Y.K. and Sarai, A.,. (2015). The dipole-Mediated t-j model For High Tc superconductivity. International journal of Physics and Mathematical sciences , 2-5.
[18]. Annett, J. (2017). Superconductivity Lectures. University of Bristol, 20-45.
[19]. Nozieres P. (1964).Theory of interacting Fermi systems . Addison-Wesley, Reading, 1-5.
[20]. Munasia .E, Rapando B.W and Ndinya B. (2019). Superconducting Parameters of Cuprates Due to Microwave Irradiation In The Framework Of The Variational Theory. Journal of Multidisciplinary Engineering Science and Technology (JMEST) , 1-7.
[21]. Christopher, B.B., Gaungkun, L., Elbio, D., and Adriana, M. (2016). On-Site attractive Miltiorbital Hamiltonian for d-wave superconductivity. Department of Physics and Astronomy, University of Tennessee,USA , 1-3.
[22]. Kateryna, F., Arash, K., Ilya, E., and George, A, S., (2015). Hybridization effects and bond disproportionation in the bismuth perovskites. Phys. Rev. B 91, 121114.
[23]. ToshikazuEkino, AlexanderM.Gabovich ,MaiSuanLi ,MarekPe¸kała , HenrykSzymczak and Alexander I.Voitenko . (2011). d-Wave Superconductivity and s-Wave Charge Density Waves: Coexistence between Order Parameters of Different Origin and Symmetry. Open access, 18-34.
[24]. Ishii, K., Fujita, M., Sasaki, T., Minola, M., Dellea, G., Mazzoli, C., and Tsutsumi, K. (2014). High-energy spin and charge excitations in electron-doped copper oxide superconductors. Nature communications, 5.
[25]. Kibe H.E., Sakwa T.W., Ayodo Y.K., Rapando B.W., Khanna K.M. and Sarai A., (2015). Thermodynamic Properties Of Heavy Fermion Superconductors . Open Access, 1-11.
[26]. Odhiambo, O.J., Sakwa, W.T., Ayodo, K.Y., Makokha, W.J., (2017). Thermodynamic properties of an interaction between cooper pairs and electrons in Bismuth based cuprate superconductivity. Proceedings of Kibabii University 2nd Interdisciplinary International Scientific conference , 1-3.
[27]. Mukubwa, A.W., Odhiambo. J.O., and Makokha, J.W., (2018). Thermodynamic Properties of Yttrium Based Cuprate Due to Electron-Cooper Pair Interaction Using BVT. Open Access LIbrary Kibabii University, 1-8.
[28]. Odhiambo J. O., and Makokha, J. W., (2018). Specific Heat and Entropy of a Three Electron Model in Bismuth Based Cuprate Superconductor. World Journal of Applied Physics, 19-22.

Andrew Munyasia Wanyonyi, Michael Nakitare Waswa, John W Makokha "Effect of Internal Energy on Specific Heat of Cuprates using s-Wave and d-Wave Hybrid Model" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.01-04 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/01-04.pdf

For Full Text Click here

Share on Social media

Infection Status of Paramphistomes in Cattle at Northern Area of Bangladesh

Md. Golam Azam, Lovely Nahar, Shah Md. Abdur Rouf, Mamunur Rashid, Md. Gausur Rahman, Moizur Rahman
July 2020
Page No.: 05-12

Objectives: Paramphistomiasis is a common disease of ruminant causes heavy economic losses, distributed all over the world and caused by different genus and species of paramphistomes. This study was conducted to investigate the epidemiology of paramphistomiasis in cattle in northern areas of Bangladesh. Materials and methods: A cross sectional study was conducted from July, 2018 to October, 2019 and a total 300 faecal, 150 visceral and 300 snail samples were examined. The faecal samples were examined by Modified Stoll’s Dilution Technique. The paramphistomes were preliminary identified under microscope using low powder objectives and snails were identified by their characteristics shell characters. Results: The overall prevalence of paramphistomiasis was recorded as 79.66% (faecal sample) and 92.67% (visceral sample). Prevalence was higher in adult and female than young and male. Cross breed and pasture grazing cattle were more infected than indigenous and stall feeding cattle. Infection rate was high in poor health cattle and rainy season than good health cattle and summer season. It was observed that prevalence of paramphistomiasis in cattle was significantly affected by age, sex, breed, feeding habit of cattle but seasons of the year had no significant effect. It was found that 6.33% snail (Indoplanorbis sp.) of the research areas were infected with amphistomes cercariae and infection rate was high in rainy season. Denudation of the rumen papillae and severe haemorrhagic enteritis was also observed. Conclusion: It may conclude that age, sex, breed, feeding habit of cattle had significant effect on the prevalence of paramphistomiasis in cattle.

Page(s): 05-12

Date of Publication: 19 July 2020

Md. Golam Azam
DAssistant Professor, Dept. of Pathology and Parasitology, Hajee Mohammad Danesh Science and Technology University, Dinajpur
Lovely Nahar
Department of Veterinary and Animal Sciences, University of Rajshahi, Rajshahi-6205, Bangladesh
Shah Md. Abdur Rouf
Department of Veterinary and Animal Sciences, University of Rajshahi, Rajshahi-6205, Bangladesh
Mamunur Rashid
Department of Veterinary and Animal Sciences, University of Rajshahi, Rajshahi-6205, Bangladesh
Md. Gausur Rahman
Livestock Extension Officer, Upazila Livestock Office, Sadar, Rajbari
Moizur Rahman
Department of Veterinary and Animal Sciences, University of Rajshahi, Rajshahi-6205, Bangladesh

References

[1]. Bailly WS. Report to the Government of the Philippines on a Pilot project for the control of liver fluke on carabaos in sorsogon province. Food and Agriculture Organization, Rome, United National Development Programme, Report NO. TA, 2995, 1971.
[2]. Alim MA, Mondal MMH, Islam MK and Khan MAHNA. Fascioliasis and Biliary Amphistomiasis in Buffaloes in Bangladesh. The Bangladesh vetern 2004; 17: 136-140.
[3]. Cable RM. An illustrated laboratory mamunal of parasitology. Burges publishing Co, Menneapolis 15, Minnesota, 1967, Pp. 23-33.
[4]. Faiz MA. Report on “Investigation in to the epidemiology of parasitic disease in East Pakistan”. In: Activities on the Research sections of Directorate of Livestock Services Bangladesh 1972, Pp. 1968-1972.
[5]. Garreles G. Gastro-intestinal parasitic infestation in some villages of Dhaka and Tangial district in Bangladesh. Bangladesh Vet J 1975; 9(1-4): 9-10.
[6]. Hossain MI and Baki MA. Pathological studies on intestinal amphistomiasis in buffaloes. Bangladesh Vetern 1987; 4(1-2): 29-33.
[7]. Hanna, REB, Williamson DS, Mattison RG and Nizami WA. Seasonal reproduction in Paramphistomum epiclitum and Gastrothylax crumenifer, rumen paramphistomes of Indian water buffalo and comparison with billiary Paramphistome gigantocotyle explanatum. Intl J Parasitol 1988; 18: 513-521.
[8]. Hubendick B. Recent Lymnaidae. Kungl Svenska Vetenskaps Akademiens Handlingar 1951; 3: 1-223.
[9]. Islam MZ. Studies on the seasonal incidence of abomasal helmiths of goats in Shavar, Dhaka. M. Sc. (Masters of Science) Thesis. Dept. of Parasitology. Bangladesh Agricultural University, Mymensingh, 1987, Pp 1.
[10]. Jabber M and Green DAG (1983). The status and potential of livestock within the context of agricultural development policy in Bangladesh. The University of wales. Aberystwyth, United Kingdom. P. 113.
[11]. Jithendran KP and Bhat TK. Epidamiology of parasities in dairy animals in Northwest Humied Himalayan Region of India with particular reference to gastrointestinal nematodes. Trop Ann Health and Prod 1999; 31(4): 205-214.
[12]. Malek E and Cheng TC. Medical and Economic Malacology. Academic Press. New York, 1974, Pp. 35-71.
[13]. Malek EA. Laboratory Guide and notes for Medical Malacology. Burgess Publishing Company, 426. South Sixth Street, Minneapolis, 151. 1962, Pp. 34-68.
[14]. Manna AK, Pramanik S and Mukherjee GS. Incidence of paramphistomiasis in west Bengal. Indian J Anim Health 1994; 33(2): 87-89.
[15]. Mondal MMH, Alim MA, Shahiduzzaman M, Farjana T, Islam MK, Das PM and Islam MZ. Pathology of Amphistomiasis in ruminants in Bangladesh. Bangladesh Vet J 2002; 36(3-4): 109-114.
[16]. Nortan CC. A Survey of nematodes from lower digestive tract of domestic fowl. J Helmin 1964; 38: 269-282.
[17]. Okafor FC, Mbata G and Anosike J. Studies on Patamphistomum cervi (Schrank, 1790) infection of ruminants in Imo state, Nigeria with special reference to the role played by Bulinus b. forskalii (Ehrenberg) in their transmission. Bullet Anim Health and Prod Africa 1988; 38(2): 142-146.
[18]. Rahman MH and Mondal MMH. Helminths parasites of cattle (Bosindicus) in Bangaladesh. Indian J Parasitol 1983; 7(2): 173-174.
[19]. Rahman MH, Begum N and Alim MA. Factors for the development of Furcoeereus and other cercariae in snails and their neleage. The Bangladesh Vet J 1997; 14(1-2): 29.
[20]. Saifuzzaman ABM. Incidence and seasonal variation of helminth parasites of cattle of Chandina Thana in Comilla district. M. Sc. Thesis. Submitted to the Department of Parasitology, Bangladesh Agricultural University, Mymensingh, 1996.
[21]. Schlesselman GV. Case Control Studies. 1st edition, Oxford University Press, New York, 1982, Pp. 174-177.
[22]. Singh A, Srivastava S, Shekhar C and Singh J. Prevalence of trematodes in bovines and snails. Indian Vet J 2009; 86(2): 206-207.
[23]. Soulsby EJL. Helminths, Arthropods and protozoa of Domesticated Animals. 7th edn. ELBS, Bailliere, Tendal, 1982, Pp. 70-71.
[24]. Taylor EL. A method of estimating the number of worms present in the forth-stomach and small intestine of sheep and cattle for the definite diagnosis of parasitic gastro-enteritis. Vet Res 1934; 14: 474.
[25]. Uddin Z. Epidemiolocal investigation of the prevalence and pathology of amphistomiasis in Black Bangal Goat at Mymensingh district. M.Sc. Theisi submitted to the Department of Parasitology, Bangladesh Agricultural University, Mymensingh, 1999.
[26]. Yamagutyi S. Systema Helminthum. Vol. 1. Inter Science publisher. New York, 1958, Pp. 839-841.
[27]. Khan UJ, Tanveer A, Maqbool A and Masood S. Epidemiological studies of parampistomiasis in cattle. Vet Res 2008; 78: 243-251.
[28]. Fox M. Pathophysiology of infection with gastro–intestinal nematodes in domestic ruminants: Recent developments. Vet. Parasitol 1997; 72: 285–297.
[29]. Mia NH and Kibria. A study of livestock for second plan. Planning Commission, Dhaka, 1993.
[30]. Sey O, Prasitirat P, Romratanapun S and Mohkaew K. Morphological studies and identification of rumen flukes of cattle in Thailand. Rivista Di Parasitologia, 1997; XIV (2): 247-256.
[31]. Zinsstag J, Ankers PH, Dempfie L, Njie M, Kaufmann J, Itty P, Pfister K and Pandey VS. Effect of strategic gastrointestinal nematode control on growth of N’Dama cattle in Gambia. Vet Parasitol, 1997; 68: 143-153.
[32]. Mostafa MG. Methods of statistics. Fourth edn. Karim Press and Publications, Dhaka, 1989, Pp. 296-298.
[33]. Sey, O.; Prasitirat, P.; Romratanapun, S. and Mohkaew, K. (1997).
[34]. Morphological studies and identification of rumen flukes of cattle in
[35]. Thailand. Rivista Di Parasitologia, XIV(2): 247-256
[36]. Sey, O.; Prasitirat, P.; Romratanapun, S. and Mohkaew, K. (1997).
[37]. Morphological studies and identification of rumen flukes of cattle in
[38]. Thailand. Rivista Di Parasitologia, XIV(2): 247-256Sey, O, Prasitirat, P.; Romratanapun, S. and Mohkaew, K. (1997). Morphological studies and identification of rumen flukes of cattle in Thailand. Rivista Di Parasitologia, XIV(2): 247-256

Md. Golam Azam, Lovely Nahar, Shah Md. Abdur Rouf, Mamunur Rashid, Md. Gausur Rahman, Moizur Rahman, "Infection Status of Paramphistomes in Cattle at Northern Area of Bangladesh" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.05-12 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/05-12.pdf

For Full Text Click here

Share on Social media

GC-MS Analysis of Some Phytochemical Constituents in Stem Bark of Khaya Senegalensis (Desr.) A. Juss

Mohammed Idris, Adamu Ibrahim Inuwa, Aida Mohammed Kajiama, Shehu Ibrahim Baburo
July 2020
Page No.: 13-17

The phytochemical constituents of crude ethanolic stem bark extracts of khaya senegalensis were isolated and analyzed using gas chromatography-mass spectrometry (GC-MS). A shade dried stem bark of khaya senegalensis was extracted using ethanol solvent. The crude extract was subjected to preliminary phytochemical analysis in order to confirm the various classes of secondary metabolites present using standard procedure, and this indicated the presence of alkanoid, flavonoids, tannins, terpenoids, steroids, saponins, and carbohydrate. The GC-MS analysis of crude ethanolic extract of the sample using coupled Agilent 7890B gas chromatography and Agilent 5977A mass spectrometer confirmed the presence of: Methylamine, N, N-dimethyl-; N, N- Dimethylotylamine; 1-Hexene, 3,4- dimethyl; 1-nonanol; Benzaldehyde, 3-benzyloxy-2-fluoro-4-methoxy; 7-Tetradecene; Bicyclo [2.1.1] hexane-2-ol, 2-ethenyl; 4-chloro-3-n-hexyltetrahydropyran; 5-ethyl-5-methyl-2-phenyl-2-oxazoline; Cis 5, 8, 11, 14, 17-Eicosapentaenoic acid; -Dihydroxydiphenylsulphone; Phenylphosphonous acid; 3-Hydroxy-2,5,5,8a-tetramethyl-3,4,4a,5,6,7,8,8a-octahdronaphthalene-1-carboxylic acid, methyl ester; Extran-3-one,17-hydroxy-(5α,17β); i-propyl 9-hexadecanoate; Octahydro-benzo[b]furan, 2-cyclohexylimino 7a-methyl; Germacrene A, 9-(methylthio)-; 3-hydroxy-2,5,5,8a-tetrametyl-3,4,4a,5,6,8,8a-octahydronaphthalene-1-carboxylic acid, methyl ester; 5-[(2,4-Dinitrophenyl)-hydrazonomethyl]-dihydrofuran-2-one. for minor peaks. The molecular weight of these compounds ranged from low to high with carbon skeleton of between C₃ and C₂₀ that are both aromatic and aliphatic.

Page(s): 13-17

Date of Publication: 19 July 2020

Mohammed Idris
Department of Chemistry, Faculty of Science, Federal University Gashua, Nigeria
Adamu Ibrahim Inuwa
Department of Chemistry, Faculty of Science, Federal University Gashua, Nigeria
Aida Mohammed Kajiama
Shehu Sule School of Nursing and Midwifery, Damaturu, Nigeria
Shehu Ibrahim Baburo
Department of Basic Science, Yobe State College of Agriculture, Gujba, Nigeria

References

[1]. Abalaka, M. E., Daniyan, S. Y., Akpor, O. B. and Inyinbor, A. A. (2016). Antimicrobial, In-vitro Free Radical Scavenging, Antioxidant Properties of Leaf, Bark and Root Extracts from Khaya senegalensis. J.Microbio. Res. 1(1):54.
[2]. Makut M. D., Gyar S. D., Pennap G. R. I., Anthony P (2007).Phytochemical screening and antimicrobial activity of the ethanolic and methanolic extracts of the leaf and bark of Khaya senegalensis.African Journal of Biotechnology 7(9):1216-1219.
[3]. Aliyu B. S. (2006). Common ethnomedicinal plants of the Semarids Region of West Africa, their description and phytochemicals. Triumph Publishing Company Limited Kano, Nigeria. pp. 199-200.
[4]. Abdelgaleil S.A., Iwagawa T., Doe M., Nakatani M. (2004). Antifungal limonoids from the fruit of Khaya senegalensis. Fitoterapia 77: 566-572.
[5]. Abuzeid N., Kalsum S., Koshy R.J., Larsson M., Glader M., Andersson H. (2014).Antimicrobacterial activity of selected medicinal plants traditionally used in sudan to treat infectiousdiseases. J. Ethno pharmacology.157(0):134-139
[6]. Idris M. (2014). Phytochemical Screening and Some Pharmacological Studies of Leaf Extract of TerminaliaavicennioidesGuilland Pers(Combretaceae). M. Sc. Dissertation submitted to University of Maiduguri. Pp.100.

Mohammed Idris, Adamu Ibrahim Inuwa, Aida Mohammed Kajiama, Shehu Ibrahim Baburo "GC-MS Analysis of Some Phytochemical Constituents in Stem Bark of Khaya Senegalensis (Desr.) A. Juss" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.13-17 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/13-17.pdf

For Full Text Click here

Share on Social media

Determination of Heavy Metal Content in Several Commercially Available Fruit Juices in Sri Lanka

Janaka P. K. Kavikarage, Udaya Jayasundara
July 2020
Page No.: 18-20

Fruit juice samples (27) packaged in plastic bottles purchased from several retail stores in the Colombo district of Sri Lanka were analyzed for heavy metals. The fruit juice samples belonged to three categories, namely mango (9), wood apple (9), and mixed fruit (9). All samples were acid digested using ultrapure nitric acid. The concentrations of cadmium (Cd) and lead (Pb) in these digested samples were analyzed using atomic absorption spectrometry. Recovery efficiency for Cd and Pb were 98.03±0.23% and 96.97±0.53% respectively. The levels of Cd in 14 fruit juice samples were above the recommended concentration (3ppb), as stated by WHO. However, the Cd level in all samples was below the stated value by UA-EPA and EU (5ppb), except for one sample which was 6.48±1.81 ppb. The Pb analyzed in all samples was below the recommended level as stated by WHO, EU (10ppb), and UA-EPA (15 ppb). These results show that the commercially available bottled fruit juice samples are safe for consumption and that the Cd and Pb content present on the juices may not have a toxic effect.

Page(s): 18-20

Date of Publication: 23 July 2020

Janaka P. K. Kavikarage
College of Chemical Sciences, Institute of Chemistry Ceylon, Rajagiriya, Sri Lanka
Udaya Jayasundara
College of Chemical Sciences, Institute of Chemistry Ceylon, Rajagiriya, Sri Lanka

References

[1]. Anwar, A.; Mahmood, T.; Haque, Q.-U.-; Aziz, Z.; Kiswar, F.; Perveen, R.; Ismat, S. HEAVY METALS IN FRUIT JUICES IN DIFFERENT PACKING MATERIAL. 2014, 4, 191–194.
[2]. Review, H.; Sankhla, M. S.; Kumari, M.; Nandan, M. Heavy Metals Contamination in Water and Their Hazardous Effect on Human Heavy Metals Contamination in Water and Their Hazardous Effect on Human Health-A Review. 2016, No. October.
[3]. Hettige, N. D.; Weerasekara, K. A. W. S. Bioaccumulation of Trace Metals in Cyprinus Carpio ( Common Carp ) from Bomuruella Reservoir , Nuwara-Eliya. 2015, 4 (1), 64–71.
[4]. Verma, A.; Sharma, P.; Dhusia, N.; More, N. Determination of Heavy Metal Content in Fruits and Fruits Juices Consume in Urban Areas of. 2016, 1 (5), 44–50.
[5]. Khan, I.; Mehmood, Z.; Khan, M.; Fatima, T. Analysis and Detection of Heavy Metals Present in Fruit Juices of Lahore. 2016, 6 (4), 3536–3539.
[6]. Lead in Drinking-Water Background Document for Development of. WHO/SDE/WSH/03.04/09/Rev/1.
[7]. Howard Hu, M.D., M.P.H., S. D. HUMAN HEALTH AND HEAVY METALS EXPOSURE. 2002.
[8]. Cadmium in Drinking-Water. WHO/SDE/WSH/03.04/80/Rev/1.
[9]. B.A. Zarcinas, B. C. & L. R. S. Nitric Acid Digestion and Multi‐element Analysis of Plant Material by Inductively Coupled Plasma Spectrometry. Commun. Soil Anal.2008, 131–146.
[10]. Idera, F.; Omotola, O.; Adedayo, A.; Paul, U. J. Comparison of Acid Mixtures Using Conventional Wet Digestion Methods for Determination of Heavy Metals in Fish Tissues. 2015, 8 (7), 1–9.
[11]. Matusiewicz, H. Part I : Methodology in Trace Element Determination. 2018, No. December 2003.
[12]. Twyman, R. M. The Nature of the Sample Matrix Extraction of the Analyte. 2000, 146–152.
[13]. Musa, A. I.; Lal, P. ANALYSIS OF HEAVY METALS AND MINERALS IN FRUIT JUICES BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY COUPLED WITH ATOMIC ABSORPTION SPECTROSCOPY Aminu Isa Musa * and Parmeshwal Lal. 2018, 9 (L), 25509–25511.
[14]. Ahmed, M. M. Prof . Dr . Moustafa Moustafa Mohamed Prof of Biomedical Physics , Medical Research Institute , Alexandria University Vice Dean , Faculty of Allied Medical Science , Pharos University in Alexandria. 2016, No. July 2012.

Janaka P. K. Kavikarage, Udaya Jayasundara "Determination of Heavy Metal Content in Several Commercially Available Fruit Juices in Sri Lanka" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.18-20 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/18-20.pdf

For Full Text Click here

Share on Social media

Solutions of Population Growth and Decay Problems Using Sumudu Transform

Sudhanshu Aggarwal, Swarg Deep Sharma, Neeraj Kumar, Aakansha Vyas
July 2020
Page No.: 21-26

In recent years, many scholars have paid attention to determine the solution of advance problems of engineering and sciences by using integral transforms method. In this paper, authors determine the solutions of population growth and decay problems with the help of Sumudu transform. These problems have much importance in the field of economics, chemistry, biology, physics, social science and zoology. Authors have considered some numerical applications to demonstrate the effectiveness of Sumudu transform for determining the solutions of population growth and decay problems. Results of numerical applications show that Sumudu transform is a very useful integral transform for determining the solutions of population growth and decay problems.

Page(s): 21-26

Date of Publication: 24 July 2020

Sudhanshu Aggarwal
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India
Swarg Deep Sharma
Assistant Professor, Department of Mathematics, Nand Lal Singh College Jaitpur Daudpur Constituent of Jai Prakash University Chhapra-841205, Bihar, India
Neeraj Kumar
Professor, Department of Chemistry, JB Institute of Technology, Dehradun-248011, Uttrakhand, India
Aakansha Vyas
Assistant Professor, Noida Institute of Engineering & Technology, Greater Noida-201306, U.P., India

References

[1]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Mahgoub transform for solving linear Volterra integral equations. Asian Resonance, 7(2), 46-48.
[2]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Mahgoub transform for solving linear Volterra integral equations of first kind. Global Journal of Engineering Science and Researches, 5(9), 154-161.
[3]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). A new application of Aboodh transform for solving linear Volterra integral equations. Asian Resonance, 7(3), 156-158.
[4]. Aggarwal, S., Gupta, A. R., & Sharma, S. D. (2019). A new application of Shehu transform for handling Volterra integral equations of first kind. International Journal of Research in Advent Technology, 7(4), 439-445.
[5]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[6]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3745-3753.
[7]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integral equations of second kind using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3098-3102.
[8]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Kamal transform for solving linear Volterra integral equations. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(4), 138-140.
[9]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integro-differential equations of second kind using Mahgoub transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(5), 173-176.
[10]. Aggarwal, S., & Gupta, A. R. (2019). Solution of linear Volterra integro-differential equations of second kind using Kamal transform. Journal of Emerging Technologies and Innovative Research, 6(1), 741-747.
[11]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integro-differential equations of second kind. International Journal of Research in Advent Technology, 6(6), 1186-1190.
[12]. Chauhan, R., & Aggarwal, S. (2018). Solution of linear partial integro-differential equations using Mahgoub transform. Periodic Research, 7(1), 28-31.
[13]. Gupta, A. R., Aggarwal, S., & Agrawal, D. (2018). Solution of linear partial integro-differential equations using Kamal transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(7), 88-91.
[14]. Singh, G. P., & Aggarwal, S. (2019). Sawi transform for population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(8), 157-162.
[15]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of population growth and decay problems by using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3277-3282.
[16]. Aggarwal, S., Gupta, A. R., Asthana, N., & Singh, D. P. (2018). Application of Kamal transform for solving population growth and decay problems. Global Journal of Engineering Science and Researches, 5(9), 254-260.
[17]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). Application of Shehu transform for handling growth and decay problems. Global Journal of Engineering Science and Researches, 6(4), 190-198.
[18]. Aggarwal, S., Singh, D. P., Asthana, N., & Gupta, A. R. (2018). Application of Elzaki transform for solving population growth and decay problems. Journal of Emerging Technologies and Innovative Research, 5(9), 281-284.
[19]. Aggarwal, S., Gupta, A. R., Singh, D. P., Asthana, N., & Kumar, N. (2018). Application of Laplace transform for solving population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(9), 141-145.
[20]. Aggarwal, S., Pandey, M., Asthana, N., Singh, D. P., & Kumar, A. (2018). Application of Mahgoub transform for solving population growth and decay problems. Journal of Computer and Mathematical Sciences, 9(10), 1490-1496.
[21]. Aggarwal, S., Sharma, N., & Chauhan, R. (2020). Duality relations of Kamal transform with Laplace, Laplace–Carson, Aboodh, Sumudu, Elzaki, Mohand and Sawi transforms. SN Applied Sciences, 2(1), 135.
[22]. Aggarwal, S., & Bhatnagar, K. (2019). Dualities between Laplace transform and some useful integral transforms. International Journal of Engineering and Advanced Technology, 9(1), 936-941.
[23]. Chauhan, R., Kumar, N., & Aggarwal, S. (2019). Dualities between Laplace-Carson transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 1654-1659.
[24]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between Mohand transform and some useful integral transforms. International Journal of Recent Technology and Engineering, 8(3), 843-847.
[25]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between some useful integral transforms and Sawi transform. International Journal of Recent Technology and Engineering, 8(3), 5978-5982.
[26]. Aggarwal, S., Bhatnagar, K., & Dua, A. (2019). Dualities between Elzaki transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 4312-4318.
[27]. Aggarwal, S., Sharma, N., Chaudhary, R., & Gupta, A. R. (2019). A comparative study of Mohand and Kamal transforms. Global Journal of Engineering Science and Researches, 6(2), 113-123.
[28]. Aggarwal, S., Mishra, R., & Chaudhary, A. (2019). A comparative study of Mohand and Elzaki transforms. Global Journal of Engineering Science and Researches, 6(2), 203-213.
[29]. Aggarwal, S., & Sharma, S. D. (2019). A comparative study of Mohand and Sumudu transforms. Journal of Emerging Technologies and Innovative Research, 6(3), 145-153.
[30]. Aggarwal, S., & Chauhan, R. (2019). A comparative study of Mohand and Aboodh transforms. International Journal of Research in Advent Technology, 7(1), 520-529.
[31]. Aggarwal, S., & Chaudhary, R. (2019). A comparative study of Mohand and Laplace transforms. Journal of Emerging Technologies and Innovative Research, 6(2), 230-240.
[32]. Aggarwal, S., Gupta, A. R., & Kumar, A. (2019). Elzaki transform of error function. Global Journal of Engineering Science and Researches, 6(5), 412-422.
[33]. Aggarwal, S., & Singh, G. P. (2019). Aboodh transform of error function. Universal Review, 10(6), 137-150.
[34]. Aggarwal, S., & GP, S. (2019). Shehu Transform of Error Function (Probability Integral). Int J Res Advent Technol, 7, 54-60.
[35]. Aggarwal, S., & Sharma, S. D. (2019). Sumudu transform of error function. Journal of Applied Science and Computations, 6(6), 1222-1231.
[36]. Aggarwal, S., Gupta, A. R., & Kumar, D. (2019). Mohand transform of error function. International Journal of Research in Advent Technology, 7(5), 224-231.
[37]. Aggarwal, S., & Singh, G. P. (2019). Kamal transform of error function. Journal of Applied Science and Computations, 6(5), 2223-2235.
[38]. Aggarwal, S., Gupta, A. R., Sharma, S. D., Chauhan, R., & Sharma, N. (2019). Mahgoub transform (Laplace-Carson transform) of error function. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(4), 92-98.
[39]. Aggarwal, S., Singh, A., Kumar, A., & Kumar, N. (2019). Application of Laplace transform for solving improper integrals whose integrand consisting error function. Journal of Advanced Research in Applied Mathematics and Statistics, 4(2), 1-7.
[40]. Aggarwal, S., Sharma, N., Chauhan, R., Gupta, A. R., & Khandelwal, A. (2018). A new application of Mahgoub transform for solving linear ordinary differential equations with variable coefficients. Journal of Computer and Mathematical Sciences, 9(6), 520-525.
[41]. Aggarwal, S., & Sharma, S. D. (2019). Application of Kamal transform for solving Abel’s integral equation. Global Journal of Engineering Science and Researches, 6(3), 82-90.
[42]. Aggarwal, S., & Gupta, A. R. (2019). Sumudu transform for the solution of Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(4), 423-431.
[43]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). A new application of Mohand transform for handling Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(3), 600-608.
[44]. Aggarwal, S., & Sharma, S. D. (2019). Solution of Abel’s integral equation by Aboodh transform method. Journal of Emerging Technologies and Innovative Research, 6(4), 317-325.
[45]. Aggarwal, S., & Gupta, A. R. (2019). Shehu Transform for Solving Abel’s Integral Equation. Journal of Emerging Technologies and Innovative Research, 6(5), 101-110.
[46]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Mohand transform of Bessel’s functions. International Journal of Research in Advent Technology, 6(11), 3034-3038.
[47]. Aggarwal, S., Gupta, A. R., & Agrawal, D. (2018). Aboodh transform of Bessel’s functions. Journal of Advanced Research in Applied Mathematics and Statistics, 3(3), 1-5.
[48]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Mahgoub transform of Bessel’s functions. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(8), 32-36.
[49]. Aggarwal, S. (2018). Elzaki transform of Bessel’s functions. Global Journal of Engineering Science and Researches, 5(8), 45-51.
[50]. Chaudhary, R., Sharma, S.D., Kumar, N., & Aggarwal, S. (2019). Connections between Aboodh transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(1), 1465-1470.
[51]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[52]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Kamal transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(8), 2081-2088.
[53]. Aggarwal, S., Asthana, N., & Singh, D.P. (2018). Solution of population growth and decay problems by using Aboodh transform method. International Journal of Research in Advent Technology, 6(10), 2706-2710.
[54]. Aggarwal, S., & Bhatnagar, K. (2019). Sadik transform for handling population growth and decay problems. Journal of Applied Science and Computations, 6(6), 1212-1221.
[55]. Aggarwal, S., & Sharma, S.D. (2019). Sadik transform of error function (probability integral). Global Journal of Engineering Science and Researches, 6(6), 125-135.
[56]. Aggarwal, S., Gupta, A.R., & Sharma, S.D. (2019). Application of Sadik transform for handling linear Volterra integro-differential equations of second kind. Universal Review, 10(7), 177-187.
[57]. Aggarwal, S., & Bhatnagar, K. (2019). Solution of Abel’s integral equation using Sadik transform. Asian Resonance, 8(2), (Part-1), 57-63.
[58]. Aggarwal, S. (2019). A comparative study of Mohand and Mahgoub transforms. Journal of Advanced Research in Applied Mathematics and Statistics, 4(1), 1-7.
[59]. Aggarwal, S. (2018). Kamal transform of Bessel’s functions. International Journal of Research and Innovation in Applied Science, 3(7), 1-4.
[60]. Chauhan, R., & Aggarwal, S. (2019). Laplace transform for convolution type linear Volterra integral equation of second kind. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 1-7.
[61]. Sharma, N., & Aggarwal, S. (2019). Laplace transform for the solution of Abel’s integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 8-15.
[62]. Aggarwal, S., & Sharma, N. (2019). Laplace transform for the solution of first kind linear Volterra integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 16-23.
[63]. Mishra, R., Aggarwal, S., Chaudhary, L., & Kumar, A. (2020). Relationship between Sumudu and some efficient integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(3), 153-159.
[64]. Watugula, G.K. (1993). Sumudu transform: A new integral transform to solve differential equations and control engineering problems. International Journal of Mathematical Education in Science and Technology, 24(1), 35-43.

Sudhanshu Aggarwal, Swarg Deep Sharma, Neeraj Kumar, Aakansha Vyas "Solutions of Population Growth and Decay Problems Using Sumudu Transform" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.14-20 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/14-20.pdf

For Full Text Click here

Share on Social media

Comparative Analysis of Biogas Produced from Treated Oil-Palm Husks

Adebote, Victoria Temitope, Ajala, Lola, Ibitoye, Francisca Omolara
July 2020
Page No.: 27-29

Production of biogas from oil palm husks treated with enzyme and alkaline for seven weeks were investigated. The physicochemical and bacteriological characteristics of the treated oil palm husks using standard techniques were also determined. The ash content, moisture content, nitrogen, total solid, organic carbon, fat, volatile matter before and after digestion of oil palm treated with enzyme were 2.60 – 2.85, 3.56 – 2.10, 0.68 -0.30, 96.44 -92.12. 87.85 -84.01, 97.40 -91.50, 0.3. -0.50 and 5.99 – 3.51 while that of oil palm husks treated with alkaline were 2.24 - 2.40, 3.51 – 2.50, 0.73 – 0.50, 96.49 – 94.08, 89.16 – 87.28, 97.76 – 94.17, 0.30 – 0.55 and 5.09 – 4.02 respectively. The bacteria isolated were Bacillus subtilis, Bacillus megatonium, Pseudomonas aeruginosa, Clostridium sporogenes and Bacillus cereus. The cumulative biogas yielded from enzyme treated oil palm husks and alkaline treated oil palm husks were 111ml and 109ml respectively. The study shows that both treatments can yield biogas when used to treat oil palm husks but enzyme treated oil palm husks has a greater potential to generate more biogas

Page(s): 27-29

Date of Publication: 24 July 2020

Adebote, Victoria Temitope
Department of Science Laboratory Technology, Rufus Giwa Polytechnic, Owo, Ondo State, Nigeria
Ajala, Lola, Ibitoye
Department of Food Science Technology, Rufus Giwa Polytechnic, Owo, Ondo State, Nigeria
Francisca Omolara
Department of Science Laboratory Technology, Rufus Giwa Polytechnic, Owo, Ondo State, Nigeria

References

[1]. American Public Health Association (2005). Standard methods for examination of water and wastewater. 21st ed. APHA, AWWA,WPCF, Washington DC, USA
[2]. AOAC, 1990. Official Methods of Analysis of the Association of Chemists. Analysis of the Association of Chemists, Washington, DC., Pp: 223-225
[3]. Cheesbrough M. (2006). Laboratory Manual. District Laboratory Practice in Tropical Countries. Cambridge University Press, United Kingdom. 2nd Edition Pp 35-70
[4]. Edelmann, W., Engeli, H. and Gradenecker, M. (1999c). Codigestion of organic solidwaste and sludge from sewage treatment. Wat. Sci. Tech. 41(3), 213-221
[5]. Holt, J.G. and Krieg, N.R. (1994). Bergey’s Manual of systematic Bacteriology. William and Wilkims Baltimore Ltd, U.S.A. Pp 60-70
[6]. Ilaboya, I.N., Asekhase, F.F., Ezugwu, M.O., Erameh, A.A and Omofuma, F.E. (2010). Studies of biogas generation from agricultural waste; Analysis of the effects of alkaline on gas generation. World Applied Sciences Journal9(5):537-545
[7]. Kelly-yong, T.L., Lee, K.T., Mohammed, A.R. and Bhatia, S. (2007). Potential of hydrogen from oil palm biomass as a source of renewable energy world-wide. Energy Policy. 35: 5692-701
[8]. Ojolo, S. J., Oke, S. A., Animasahun, K. and Adesuyi, B. K. (2007). Utilization of poultry, cow and kitchen wastes for biogas production: A comparative analysis. Iran J. Environ. Health Sci. Eng. 4(4), 223-228
[9]. Prasertsan, S and Prasertsan, P. (1996). Biomass residues from palm oil mills in Thailand: An overview on quantity and potential usage. Biomass and Bioenergy. 11(5): 387-395.
[10]. Ponwimon, W., Chairar, S., Jiravut, S. and Kamchai, W. (2019). Effect of temperature on biogas production from Oil palm empty fruit bunch mesocarp fiber: Experimental and Modeling. In book: Lecture notes in Applied Mathematics and Applied Science in Engineering. 94-102
[11]. Sagagi, B. S., Garba, B. and Usman, N.S. (2009). Studies on biogas production from fruits and vegetable waste. Bajopas Journal of Pure and Applied Sciences2(1); 115-118
[12]. Taherzadeh, M. J., &Karimi, K. (2008). Pretreatment of Lignocellulosic Wastes to Improve Ethanol and Biogas Production: A Review. Int. J. Mol. Sci., 9 (9), 1621-1651.
[13]. Thomsen, A.B., lisen, G., Baene, L., verstraete, w., and Ahring, B. (2004). Thermal wet oxidation improves anaerobic biodegradability of raw and digested biowaste. Environmental science and technology. 38: 3418-3424.
[14]. Zhong, W., Zhang, Z., Luo, Y., Sun, s., Qiao, W., and Xiao, M. (2011). Effect of biological pretreatments in enhancing corn straw biogas production. Bioresour. Tecchnol. 102: 11177-11182

Adebote, Victoria Temitope, Ajala, Lola, Ibitoye, Francisca Omolara "Comparative Analysis of Biogas Produced from Treated Oil-Palm Husks" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.27-29 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/27-29.pdf

For Full Text Click here

Share on Social media

Laplace-Carson Transform for the Primitive of Convolution Type Volterra Integro-Differential Equation of First Kind

Sudhanshu Aggarwal, Swarg Deep Sharma, Aakansha Vyas
July 2020
Page No.: 30-36

Volterra integro-differential equations appear in many branches of engineering, physics, biology, astronomy, radiology and having many interesting applications such as process of glass forming, diffusion process, heat and mass transfer, growth of cells and describing the motion of satellite. In this paper, authors present Laplace-Carson transform for the primitive of convolution type Volterra integro-differential equation of first kind. Four numerical problems have been considered and solved using Laplace-Carson transform for explaining the applicability of present transform. Results of numerical problems show that the Laplace-Carson transform is very effective integral transform for determining the primitive of convolution type Volterra integro-differential equation of first kind.

Page(s): 30-36

Date of Publication: 24 July 2020

Sudhanshu Aggarwal
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India
Swarg Deep Sharma
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India
Aakansha Vyas
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India

References

[1]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Mahgoub transform for solving linear Volterra integral equations. Asian Resonance, 7(2), 46-48.
[2]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Mahgoub transform for solving linear Volterra integral equations of first kind. Global Journal of Engineering Science and Researches, 5(9), 154-161.
[3]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). A new application of Aboodh transform for solving linear Volterra integral equations. Asian Resonance, 7(3), 156-158.
[4]. Aggarwal, S., Gupta, A. R., & Sharma, S. D. (2019). A new application of Shehu transform for handling Volterra integral equations of first kind. International Journal of Research in Advent Technology, 7(4), 439-445.
[5]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[6]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3745-3753.
[7]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integral equations of second kind using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3098-3102.
[8]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Kamal transform for solving linear Volterra integral equations. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(4), 138-140.
[9]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integro-differential equations of second kind using Mahgoub transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(5), 173-176.
[10]. Aggarwal, S., & Gupta, A. R. (2019). Solution of linear Volterra integro-differential equations of second kind using Kamal transform. Journal of Emerging Technologies and Innovative Research, 6(1), 741-747.
[11]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integro-differential equations of second kind. International Journal of Research in Advent Technology, 6(6), 1186-1190.
[12]. Chauhan, R., & Aggarwal, S. (2018). Solution of linear partial integro-differential equations using Mahgoub transform. Periodic Research, 7(1), 28-31.
[13]. Gupta, A. R., Aggarwal, S., & Agrawal, D. (2018). Solution of linear partial integro-differential equations using Kamal transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(7), 88-91.
[14]. Singh, G. P., & Aggarwal, S. (2019). Sawi transform for population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(8), 157-162.
[15]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of population growth and decay problems by using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3277-3282.
[16]. Aggarwal, S., Gupta, A. R., Asthana, N., & Singh, D. P. (2018). Application of Kamal transform for solving population growth and decay problems. Global Journal of Engineering Science and Researches, 5(9), 254-260.
[17]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). Application of Shehu transform for handling growth and decay problems. Global Journal of Engineering Science and Researches, 6(4), 190-198.
[18]. Aggarwal, S., Singh, D. P., Asthana, N., & Gupta, A. R. (2018). Application of Elzaki transform for solving population growth and decay problems. Journal of Emerging Technologies and Innovative Research, 5(9), 281-284.
[19]. Aggarwal, S., Gupta, A. R., Singh, D. P., Asthana, N., & Kumar, N. (2018). Application of Laplace transform for solving population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(9), 141-145.
[20]. Aggarwal, S., Pandey, M., Asthana, N., Singh, D. P., & Kumar, A. (2018). Application of Mahgoub transform for solving population growth and decay problems. Journal of Computer and Mathematical Sciences, 9(10), 1490-1496.
[21]. Aggarwal, S., Sharma, N., & Chauhan, R. (2020). Duality relations of Kamal transform with Laplace, Laplace–Carson, Aboodh, Sumudu, Elzaki, Mohand and Sawi transforms. SN Applied Sciences, 2(1), 135.
[22]. Aggarwal, S., & Bhatnagar, K. (2019). Dualities between Laplace transform and some useful integral transforms. International Journal of Engineering and Advanced Technology, 9(1), 936-941.
[23]. Chauhan, R., Kumar, N., & Aggarwal, S. (2019). Dualities between Laplace-Carson transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 1654-1659.
[24]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between Mohand transform and some useful integral transforms. International Journal of Recent Technology and Engineering, 8(3), 843-847.
[25]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between some useful integral transforms and Sawi transform. International Journal of Recent Technology and Engineering, 8(3), 5978-5982.
[26]. Aggarwal, S., Bhatnagar, K., & Dua, A. (2019). Dualities between Elzaki transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 4312-4318.
[27]. Aggarwal, S., Sharma, N., Chaudhary, R., & Gupta, A. R. (2019). A comparative study of Mohand and Kamal transforms. Global Journal of Engineering Science and Researches, 6(2), 113-123.
[28]. Aggarwal, S., Mishra, R., & Chaudhary, A. (2019). A comparative study of Mohand and Elzaki transforms. Global Journal of Engineering Science and Researches, 6(2), 203-213.
[29]. Aggarwal, S., & Sharma, S. D. (2019). A comparative study of Mohand and Sumudu transforms. Journal of Emerging Technologies and Innovative Research, 6(3), 145-153.
[30]. Aggarwal, S., & Chauhan, R. (2019). A comparative study of Mohand and Aboodh transforms. International Journal of Research in Advent Technology, 7(1), 520-529.
[31]. Aggarwal, S., & Chaudhary, R. (2019). A comparative study of Mohand and Laplace transforms. Journal of Emerging Technologies and Innovative Research, 6(2), 230-240.
[32]. Aggarwal, S., Gupta, A. R., & Kumar, A. (2019). Elzaki transform of error function. Global Journal of Engineering Science and Researches, 6(5), 412-422.
[33]. Aggarwal, S., & Singh, G. P. (2019). Aboodh transform of error function. Universal Review, 10(6), 137-150.
[34]. Aggarwal, S., & GP, S. (2019). Shehu Transform of Error Function (Probability Integral). Int J Res Advent Technol, 7, 54-60.
[35]. Aggarwal, S., & Sharma, S. D. (2019). Sumudu transform of error function. Journal of Applied Science and Computations, 6(6), 1222-1231.
[36]. Aggarwal, S., Gupta, A. R., & Kumar, D. (2019). Mohand transform of error function. International Journal of Research in Advent Technology, 7(5), 224-231.
[37]. Aggarwal, S., & Singh, G. P. (2019). Kamal transform of error function. Journal of Applied Science and Computations, 6(5), 2223-2235.
[38]. Aggarwal, S., Gupta, A. R., Sharma, S. D., Chauhan, R., & Sharma, N. (2019). Mahgoub transform (Laplace-Carson transform) of error function. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(4), 92-98.
[39]. Aggarwal, S., Singh, A., Kumar, A., & Kumar, N. (2019). Application of Laplace transform for solving improper integrals whose integrand consisting error function. Journal of Advanced Research in Applied Mathematics and Statistics, 4(2), 1-7.
[40]. Aggarwal, S., Sharma, N., Chauhan, R., Gupta, A. R., & Khandelwal, A. (2018). A new application of Mahgoub transform for solving linear ordinary differential equations with variable coefficients. Journal of Computer and Mathematical Sciences, 9(6), 520-525.
[41]. Aggarwal, S., & Sharma, S. D. (2019). Application of Kamal transform for solving Abel’s integral equation. Global Journal of Engineering Science and Researches, 6(3), 82-90.
[42]. Aggarwal, S., & Gupta, A. R. (2019). Sumudu transform for the solution of Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(4), 423-431.
[43]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). A new application of Mohand transform for handling Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(3), 600-608.
[44]. Aggarwal, S., & Sharma, S. D. (2019). Solution of Abel’s integral equation by Aboodh transform method. Journal of Emerging Technologies and Innovative Research, 6(4), 317-325.
[45]. Aggarwal, S., & Gupta, A. R. (2019). Shehu Transform for Solving Abel’s Integral Equation. Journal of Emerging Technologies and Innovative Research, 6(5), 101-110.
[46]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Mohand transform of Bessel’s functions. International Journal of Research in Advent Technology, 6(11), 3034-3038.
[47]. Aggarwal, S., Gupta, A. R., & Agrawal, D. (2018). Aboodh transform of Bessel’s functions. Journal of Advanced Research in Applied Mathematics and Statistics, 3(3), 1-5.
[48]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Mahgoub transform of Bessel’s functions. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(8), 32-36.
[49]. Aggarwal, S. (2018). Elzaki transform of Bessel’s functions. Global Journal of Engineering Science and Researches, 5(8), 45-51.
[50]. Chaudhary, R., Sharma, S.D., Kumar, N. & Aggarwal, S. (2019). Connections between Aboodh transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(1), 1465-1470.
[51]. Aggarwal, S., Chauhan, R. & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[52]. Aggarwal, S., Sharma, N. & Chauhan, R. (2018). Application of Kamal transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(8), 2081-2088.
[53]. Aggarwal, S., Asthana, N. & Singh, D.P. (2018). Solution of population growth and decay problems by using Aboodh transform method. International Journal of Research in Advent Technology, 6(10), 2706-2710.
[54]. Aggarwal, S. & Bhatnagar, K. (2019). Sadik transform for handling population growth and decay problems. Journal of Applied Science and Computations, 6(6), 1212-1221.
[55]. Aggarwal, S. & Sharma, S.D. (2019). Sadik transform of error function (probability integral). Global Journal of Engineering Science and Researches, 6(6), 125-135.
[56]. Aggarwal, S., Gupta, A.R. & Sharma, S.D. (2019). Application of Sadik transform for handling linear Volterra integro-differential equations of second kind. Universal Review, 10(7), 177-187.
[57]. Aggarwal, S. & Bhatnagar, K. (2019). Solution of Abel’s integral equation using Sadik transform. Asian Resonance, 8(2), (Part-1), 57-63.
[58]. Aggarwal, S. (2019). A comparative study of Mohand and Mahgoub transforms. Journal of Advanced Research in Applied Mathematics and Statistics, 4(1), 1-7.
[59]. Aggarwal, S. (2018). Kamal transform of Bessel’s functions. International Journal of Research and Innovation in Applied Science, 3(7), 1-4.
[60]. Chauhan, R. & Aggarwal, S. (2019). Laplace transform for convolution type linear Volterra integral equation of second kind. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 1-7.
[61]. Sharma, N. & Aggarwal, S. (2019). Laplace transform for the solution of Abel’s integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 8-15.
[62]. Aggarwal, S. & Sharma, N. (2019). Laplace transform for the solution of first kind linear Volterra integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 16-23.
[63]. Mishra, R., Aggarwal, S., Chaudhary, L., & Kumar, A. (2020). Relationship between Sumudu and some efficient integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(3), 153-159.

Sudhanshu Aggarwal, Swarg Deep Sharma, Aakansha Vyas "Laplace-Carson Transform for the Primitive of Convolution Type Volterra Integro-Differential Equation of First Kind" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.30-36 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/30-36.pdf

For Full Text Click here

Share on Social media

Synthesis and Characterization of a Gel-Biopolymer from Cane Sugar and Polymethyl acrylate

Alex O. Akinsanoye, Mopelola A. Omotoso, Oluwaseun O. Afolabi
July 2020
Page No.: 37-43

The use of cane sugar for the preparation of gel biopolymer was studied as an alternative to petroleum based gels due to their biodegradability. The sugar used was in the form of syrup obtained from evaporation of extracted cane juice. Polymethyacrylate(PMA) was obtained by polymerizing methylacrylate monomer(MA). This was copolymerized with the syrup from the cane sugar to obtain the sugar-based acrylate biopolymer (Sugar-g-PMA) via graft copolymerization of PMA using acidified potassium permanganate as initiator at 90⁰C. The product obtained was a dark brown gel. FTIR and ¹H-NMR were used to characterize the sugar, PMA and the copolymer. The percentage of cane sugar juice extracted was 47.94% while percentage syrup obtained from the extracted cane juice was 15.22%. FTIR spectrum prominent bands found in the cane sugar were 3365.00cm^-1 and 1052.00cm^-1 for O-H stretch and C-O stretch respectively. The PMA shows the C-O stretch, C=O peak and CH₂ bend respectively at 1165.47cm^-1, 1737.37cm^-1 and 3426.00cm^-1 to confirm ester functional group moiety . The disappearance of the carbonyl peak at 1737.37cm^-1in the new Sugar-g-PMA gel copolymer confirm the grafting process. The ¹H-NMR spectrum prominent peaks found in the cane sugar were 4.04ppm, 3.81ppm and 3.66ppm which confirmed the OCH₂ and O-H group in the sugar moiety. The PMA showed important signals at 3.87ppm, 3.79ppm and 3.64ppm that confirm the presence of ester functional group. The ¹H-NMR spectrum of the Sugar-g-PMA showed a novel peak at 9.52ppm that confirm grafting process. The FTIR and ¹H-NMR results showed that the graft copolymerization reaction was successful. The Sugar-g-PMA gel produced represents an additional contribution to sustainability and production of environmentally friendly bio-based polymeric material.

Page(s): 37-43

Date of Publication: 24 July 2020

Alex O. Akinsanoye
Department of Chemistry, University of Ibadan, Ibadan, Nigeria
Mopelola A. Omotoso
Department of Chemistry, University of Ibadan, Ibadan, Nigeria
Oluwaseun O. Afolabi
Department of Chemistry, University of Ibadan, Ibadan, Nigeria

References

[1]. Acik G., Yildiran S., Kok G., Salman Y. and Tasdelen M., 2017. Synthesis and characterization of sugar-based methacrylates and their random copolymers by ATRP. eXPRESS Polym. Lett., 11: 799-808.
[2]. Agarwal S., Wendorff J.H and Greiner A., 2008. Use of electrospinning technique for biomedical applications. Polym., 49(26): 5603-5621.
[3]. Akinsanoye Olakunle Alex and Omotoso Mopelola Abeke. 2018. Oleochemicals from Water Melon (Citrullus lanatus) Seed Oils. The Pharmaceutical and Chemical Journal, 2018, 5(4):97-114.
[4]. Bujak P., Kulszewicz-Bajer I., Zagorska M., Maurel V., Wielgus I. and Pron A., 2013. Polymers of electronics and spintronics. Chem. Soc. Rev., 42: 8897-8999.
[5]. Calucci L., Galleschi L., Geppi M. and Mollica G., 2004. Structure and dynamics of flour by solid state NMR: effects of hydration and wheat aging. Biomacroms., 5: 1536–1544.
[6]. Chauhan A. and Singh B., 2011. X-Ray Powder Diffraction Studies to determine the Morphological Transformations in Hibiscus sabdariffa Graft-copolymers. Int. J. Poly. Analys. and Charact., 16: 319-328.
[7]. Clark J.H and Matharu A.S., 2013. Issues in environmental science and Technology: Waste as a Resource. R. Soc. of Chem., 37: 66-82.
[8]. Feng X., East A. J., Hammond W. and Jaffe M., 2010. Contemporary science of polymeric materials. Washington, DC: ACS Symposium Series., 3–27.
[9]. Ferreira L., Vidal M. M., Geraldes C. F. and Gil M. H., 2000. Preparation and characterisation of gels based on sucrose modified with glycidyl methacrylate. Carbohydr. Polym., 41: 15–24.
[10]. Fleet R., Van den Dungen ETA and Klumperman B., 2011. Synthesis of novel glycopolymer brushes via a combination of RAFT-mediated polymerisation and ATRP. S Afr J Sci., 107: 11.
[11]. Galbis J.A., Graca M.G., Violante de Paz M. and Elsa G., 2016. Synthetic Polymers from Sugar-Based Monomers. Chem. Rev., 116: 1600-1636.
[12]. Gandini A., 2008. Polymers from Renewable Resources: A challenge for the future of macromolecular materials. Macromol., 41: 9491−9504.
[13]. Ghosh P., Das T., Nandi D., Poddar K. and Karmakar G., 2010. Homopolymer of Methyl Acrylate and its Copolymer with Styrene: Synthesis and Characterization. J. Polym. Mater. 27(4): 323-334.
[14]. Irshad H., Khalid N., Rubab Z., Ullia M., Amjad A., Saeed F., Dastgir G., Ahmad B. and Anwar P., 2018. Study of biodegradability of Graft copolymerization of starch backbone with acrylic acid, methacrylate, acetonitrile with the advancement of Ni-doped nanoparticles. Advan. in Applied Sci. Research, 9(1): 47-55.
[15]. Jambeck J.R, Geyer R., Wilcox C., Siegler T.R, Perryman M., Andrady A., Narayan R. and Law K.L., 2015. Plastic waste inputs from land into the ocean. Sci., 347: 768-771.
[16]. Li J., Stayshich R. M. and Meyer T. Y., 2011. Exploiting sequence to control the hydrolysis behaviour of biodegradable PLGA copolymers. J. American Chem. Soc., 133: 6910–6913.
[17]. Madkour T.M., Fadl S., Dardir M.M. and Mekewi M.A., 2016. High performance nature of biodegradable polymeric composites for oil-well drilling fluids. Egypt. J. of Petroleum, 25: 281-291.
[18]. Mopelola Abeke Omotoso and Akinsanoye Olakunle Alex. 2017. Grafting vegetable oils to develop environmental friendly Industrial Chemicals. Ponte Journal. Volume 73 - Issue 7 Pp 208-220.
[19]. Queneau Y., Jarosz S., Lewandowski B. and Fitremann J., 2007. Sucrose chemistry and applications of sucrochemicals. Adv. Carbohydr. Chem. Biochem., 61: 218-271.
[20]. Queneau Y., Jarosz S., Lewandowski B. and Fitremann J., 2008. Sucrose chemistry and applications of sucrochemicals. Adv Carbohydr Chem Biochem., 61:217–292.
[21]. Rass-Hansen J., Falsig, Jorgensen B. and Christensen C.H., 2007. Bioethanol: Fuel or feedstock? J. Chem. Technol. & amp; Biotechnol, 82: 329-333.
[22]. Rop K., Mbui D., Njomo N., Karuku G., Michira I. and Ajayi R., 2019. Biodegradable water hyacinth cellulose-graft-poly(ammonium acrylate-co-acrylic acid) polymer hydrogel for potential agricultural application. Heliyon, 2405-8440.
[23]. Serrano E., Rus G. and García-Martínez J., 2009. Nanotechnology for sustainable energy. Renewab. and Sust. Energy Rev., 13(9): 2373-2384.
[24]. Sheldon R.A, 2016. Green chemistry, catalysis and valorization of waste biomass. J. Molecul. Catalys. A: Chemical, 422: 3-12.
[25]. Thomas C. M. and Lutz J.F., 2011. Precision synthesis of biodegradable polymers. Angew. Chem., Int., 50: 9244–9246.
[26]. Tomlinson E.P., Hay M.E. and Boudouris B.W., 2014. Radical Polymers and their Application to organic electronic devices. Macromol., 47: 6145-6158.
[27]. Unuabonah E. I., Adewuyi A. and Kolawole M. O., 2017. Disinfection of water with new chitosan-modified hybrid clay composites adsorbents. Heliyon, 1-31.
[28]. Weng W., Chen P., He S., Sun X. and Peng H., 2016. Smart Electronic Textiles.Angew Chem. Int. Ed. Engl., 55(21): 6140-6169.
[29]. Worthington J., Kucera L. and Chalker M., 2017. Green chemistry and polymers made from sulphur. J. Green Chem., 19: 2748-2761.
[30]. Zenz, C., Dickerson O.B. and Horvath E.P., 1994. Occupational Medicine. 3rd ed. St. Louis, MO., 756.
[31]. Zhao W., Li J., Jin K., Liu W., Qiu X. and Li C., 2016. Fabrication of functional PLGA-based electrospun scaffolds and their applications in biomedical engineering. Mater. Sci. Eng. C., 59: 1181–1194.
[32]. Zhu Y., Romain C. and Williams C.K., 2016. Sustainable polymers from renewable resources. Nature, 540: 354-362.

Alex O. Akinsanoye, Mopelola A. Omotoso, Oluwaseun O. Afolabi "Synthesis and Characterization of a Gel-Biopolymer from Cane Sugar and Polymethyl acrylate" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.37-43 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/37-43.pdf

For Full Text Click here

Share on Social media

Smart Safe Alert for Passengers Using IOT

A. Gokilavani, R.Atchaya, M. Logappriya, A. Priyanka, R. Sathish Kumar
July 2020
Page No.: 44-48

“Smart Safe Alert for Passengers Using IOT” In India 10 million are depend only on public transport service to achieve effective utilization of resources in the transport service. we proposed a project to address the issues of public transport system. smart safe alert system is specially designed for the passengers using internet of things. It has an inbuilt application which provides emergency support to the passengers. Bus is traveled through a number of bus stops. Many times buses change their routes and new bus stop names need to be configured in RF tag. So here we propose a speaking bus stop indicator system using Arduino Uno .We use RF id based circuits which will be placed on bus stops. This system does not need any bus stop name or route names to be stored in the bus system. Each bus stop system has a code and our receiver circuitry can be fed with as well a edited of existing bus stop names using a RF tag (RF transmitter). Each RF tag constantly transmits a unique bus stop code. When the bus comes in range of a bus stop the code is picked up bus system and it automatically feeds in to controller. the controller process this information to find out the name of corresponding bus stop and speaker to provider an automated Arduino based speaking bus stop indicator system.

Page(s): 44-48

Date of Publication: 24 July 2020

A. Gokilavani
Associate Professor, Jai Shriram Engineering College, Tirppur, Tamil Nadu, India
R.Atchaya
Student, Jai Shriram Engineering College, Tirppur, Tamil Nadu, India
M. Logappriya
Student, Jai Shriram Engineering College, Tirppur, Tamil Nadu, India
A. Priyanka
Student, Jai Shriram Engineering College, Tirppur, Tamil Nadu, India
R. Sathish Kumar
Student, Jai Shriram Engineering College, Tirppur, Tamil Nadu, India

References

[1]. M. A. HANNAN, A. M. MUSTAPHA, A. HUSSAIN and H.BASRI,”Intelligent Bus Monitoring and Management System”, WCECS 2012, October24-26, 2012, San Francisco, USA
[2]. Ben Ammar Hatem, Hamam Habib, “Bus Management System Using RFIDin WSN”, European and Mediterranean Conference on Information Systems 2010
[3]. AkshaBal, “RFID BASED IDENTIFICATION SYSTEM”, April 2009
[4]. LV ZHIAN HU HAN, “A Bus Management System Based on ZigBee and GSM/GPRS”, 201O International Conforence on Computer Application and System Modeling (ICCASM 2010)
[5]. Umar Farooq, Tanveer ul Haq, Senior Member IEEE, MuhammadAmar, Muhammad Usman Asad, Asim Iqbal, “GPS-GSM Integration for Enhancing Public Transportation Management Services”, 2010 Second International Conference on Computer Engineering and Applications
[6]. José I. San Jose, José M. Pastor, R. Zangróniz, Juan J. de Dios, “RFIDTracking for urban transportation using EPCGlobal-based WebServices”, 2013 27th International Conference on Advanced Information Networking andApplications Workshops
[7]. Teki, Naga. Padmaja, Tejavath. Renuka, Anantha. Sushmitha. Srilakshmi,“Design of GSM Based Smoke Detection and Temperature Monitoring System”,International Journal of Engineering Research & Technology (IJERT) Vol. 2Issue 4, April – 2013 ISSN: 2278-0181
[8]. Ding Yi, “Electronic Bus Stop Boards Promote the Intelligent Constructionof Urban Public Transportation”, 2010 International Conference on ComputerDesign And Applications (ICCDA 2010)
[9]. Shing Tenqchen, Foun-Shea Chang, Yong-Chun, Lee, Ching-Hung Wang,Chao-Hao Lee, Shen-Lung Tung, “Helping to Collect Traffic Information Using
[10]. RFID Tag Implemented on Urban-bus for Traffic Information”, Proceedings ofAsia-Pacific Microwave Conference 2006
[11]. Wiroon Sriborriruxl, Panuwat Danklangl and Nakorn Indra- Payoong, “TheDesign of RFID Sensor Network for Bus Fleet Monitoring”
[12]. ishah Mahani Mustapha, MA Hannan, Aini Hussain and Hassan Basri,“UKM Campus Bus Monitoring System Using RFID and GIS”, 2010 6th International Colloquium on Signal Processing & Its Applications (CSPA)
[13]. ZhuY, Liu Yanjuan, “Intelligent Bus-Mounted System Based On RFID”,2012 International Conference on Computer Science and Information Processing (CSIP)

A. Gokilavani, R.Atchaya, M. Logappriya, A. Priyanka, R. Sathish Kumar "Smart Safe Alert for Passengers Using IOT" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.44-48 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/44-48.pdf

For Full Text Click here

Share on Social media

Adsorbent Material from Grafting Polymethylacrylate unto Methylcellulose from Elephant (Napier) Grass Cellulose

Alex O. Akinsanoye, Mopelola A. Omotoso, Elizabeth A. Ogunlana
July 2020
Page No.: 49-55

The study examined the potential of elephant (Napier) grass cellulose in producing useful adsorbents that are biodegradable. Cellulose fibers were extracted from elephant grass fibers by chemical process. This was methylated into methylcellulose. Methylacrylate(MA) was also polymerized to polymethylacrylate (PMA). This was copolymerized with methylcellulose to form a PMA-graft methyl cellulose copolymer. The polymerization was carried out using acidified KMnO₄ as initiator. All polymerization reactions were done in a batch reactor at 90^oC under inert condition. Fourier transform infrared spectroscopy (FTIR) and proton Nuclear Magnetic Resonance (¹H-NMR) were used to characterize the methylcellulose, PMA and the copolymer. The percentage of the PMA formed is 27.8%. The copolymer grafted percentage was 43.3% while the grafting efficiency was 72.2%. The prominent bands in the FTIR spectrum of the cellulose are 1080.02cm^-1confirming the presence of C-O-C bond and 3347.00cm^-1confirming sharp and strong O-H peak. The methylcellulose showed a broad O-H peak at 3431.98cm^-1 and a C-O peak at 1081.10cm^-1 to confirm methylation. The MA showed an important IR band at 1737.14cm^-1 to confirm C=O bond. Its PMA showed similar peak at 1747.37cm^-1. The copolymer showed an important IR peak at 3446.24cm^-1 confirming O-H stretch in the copolymer. ¹H-NMR studies confirms H₂C-O at 3.62ppm in the methylcellulose, allylic proton at 1.98ppm and alpha carbonyl proton at 3.42ppm in the PMA. The peak at 12.42ppm is due to CO₂H group and it’s the novel peak found in the copolymer. It is an evidence that grafting occurred between PMA and the methylcellulose backbone. The result showed that Napier grass has potential for industrial production of cellulose fibers that can be modified into useful adsorbents.

Page(s): 49-55

Date of Publication: 24 July 2020

Alex O. Akinsanoye
Department of Chemistry, University of Ibadan, Ibadan, Nigeria
Mopelola A. Omotoso
Department of Chemistry, University of Ibadan, Ibadan, Nigeria
Elizabeth A. Ogunlana
Department of Chemistry, University of Ibadan, Ibadan, Nigeria

References

[1]. Akinsanoye O. A. and Omotoso M. A., (2018). Oleochemicals from water melon (citrullus lanatus) seed oils. The Pharmaceutical and Chemical Journal, 2018, 5(4): 97-114.
[2]. Arceo, E. 2006. Extraction and characterization of cellulose from pods of the legume Vignaunguiculata L. Walp. /Ethel L. Arceo Vera. M.S. Thesis. Department of Polymeric Materials, Scientific Research Center Yucatán, Yucatán, México.
[3]. Bergo, P. V. A., Carvalho, R. A., Sobral, P. J. A., dos Santos, R. M. C., da Silva, F. B. R., Prison, J. M., … Habitante, A. M. Q. B. 2008. Physical properties of edible films based on cassava starch as affected by the plasticizer concentration. Packaging Technology and Science, 21(2), 85-89.
[4]. Carballo, S., Reené Alicia, A., Noelia, F. M., and Jorge, H. 2009. Argentine potentiality to develop sustainable bionergyproyects. Methodology to determine driving forces of land use changes using GIS tools. Proceedings of ES2009-03-02 Energy Sustainability
[5]. Chami, A., and Robert, S. 2013. Interaction Effects between Cellulose and Water in Nanocrystalline and Amorphous Regions: A Novel Approach Using Molecular Modeling. Journal of Nanomaterials, Pp 1-10.
[6]. Chundawat, S. P. S., Beckham, G. T., Himmel, M. E., and Dale, B. E. 2011. Deconstruction of LignocellulosicBiomass to Fuels and Chemicals. Annual Review of Chemical and Biomolecular Engineering, 2(1), 121-145.
[7]. Ghoshal, S., Khan, M. A., Khan, R. A., Gul-E-Noor, F., and Sarwaruddin Chowdhury, A. M. 2010. Study on the Thermo-Mechanical and Biodegradable Properties of Shellac Films Grafted with Acrylic Monomers by GammaRadiation. Journal of Polymers and the Environment, 18(3), 216-223.
[8]. Gupta, K. C., and Khandekar, K. 2003. Temperature-Responsive Cellulose byCeric(IV) Ion-Initiated Graft Copolymerization of N-Isopropylacrylamide. Biomacromolecules, 4(3), 758-765.
[9]. Gupta, K. C., and Sahoo, S. 2000. Ceric ion initiated grafting on cellulose from binary mixture of acrylonitrile and methylacrylate. Journal of Macromolecular Science, Part A, 37(5), 447-468.
[10]. Gupta, K. C., and Sahoo, S. 2001. Graft Copolymerization of Acrylonitrile and Ethyl Methacrylate Comonomers on Cellulose Using Ceric Ions. Biomacromolecules, 2(1), 239-247.
[11]. Gupta, K. C., Sahoo, S., and Khandekar, K. 2002. Graft Copolymerization of Ethyl Acrylate onto Cellulose Using Ceric Ammonium Nitrate as Initiator in Aqueous Medium. Biomacromolecules, 3(5), 1087-1094.
[12]. Ibrahim, M., Flefel, E., and El-Zawawy, W. K. 2002. Cellulose membranes grafted with vinyl monomers in a homogeneous system. Polymers for Advanced Technologies, 13(7), 548-557.
[13]. Klemm, D., Heublein, B., Fink, H. P., and Bohn, A. 2005. Cellulose: Fascinating Biopolymer and Sustainable Raw Material. AngewandteChemie International Edition, 44(22), 3358-3393.
[14]. Krässig, H. A. 1993. Cellulose: Structure, Accessibility and Reactivity. Gordon and breach science publishers, Polymer Monographs, 11(2), 123-132.
[15]. Lejeune, A., and Deprez, T. 2010. Cellulose: structure and properties, derivatives and uses. Nova Science Publishers. 5(1), 222-223.
[16]. Li, Y., Liu, Y., Chen, W., Wang, Q., Liu, Y., Li, J., and Yu, H. 2016. Facile extraction of cellulose nanocrystals from wood using ethanol and peroxide solvothermal pretreatment followed by ultrasonic nanofibrillation. Green Chemistry, 18(4), 1010-1018.
[17]. Maheswari, C. U., Reddy, K. O., Muzenda, E., Guduri, B. R., and Rajulu, A. V. 2012. Extraction and characterization of cellulose microfibrils from agricultural residue – Cocos nucifera L. Biomass and Bioenergy, 46, 555-563.
[18]. Mopelola Abeke Omotoso and Akinsanoye Olakunle Alex. 2017. Grafting vegetable oils to develop environmental friendly IndustrialChemicals. Ponte Journal. Volume 73 - Issue 7 Pp 208-220.
[19]. Priya, B., Singha, A. S., and Pathania, D. 2014. Synthesis and kinetics of ascorbic acid initiated graft copolymerized delignified cellulosic fiber. Polymer Engineering & Science, 55(2), 474-484.
[20]. Singha, A. S., and Rana, A. K. 2012. Effect of graft copolymerization on mechanical, thermal, and chemical properties of grewia optiva/unsaturated polyester biocomposites. Polymer Composites, 33(8), 1403-1414.
[21]. Singha, A. S., and Thakur, V. K. 2009. Chemical Resistance, Mechanical and Physical Properties of Biofibers-Based Polymer Composites. Polymer-Plastics Technology and Engineering, 48(7), 736-744.
[22]. Singha, A. S., Guleria, A., and Rana, R. K. 2013. Ascorbic acid/h2o2-initiated graft copolymerization of methyl methacrylate onto abelmoschus esculentus fiber: a kinetic approach. International journal analysis (18), 1-8
[23]. Siqueira, G., Bras, J., and Dufresne, A. 2010. Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications. Polymers, 2(4), 728-765.
[24]. Thakur, V. K., Singha, A. S., Kaur, I., Nagarajarao, R. P., and Liping, Y. 2010. Silane Functionalization of Saccaharumcilliare Fibers: Thermal, Morphological, and Physicochemical Study. International Journal of Polymer Analysis and Characterization, 15(7), 397-414.
[25]. Viera, R. G. P., Rodrigues, F. G., de Assuncao, R. M. N., Meireles, C. S., Vieira, J. G., de Oliveira, G. S. 2007. Carbohydrate Polymer, 67, 182.
[26]. Winstein, S., and Henderson, R., B. 1994. Journal of American chemistry society 65, 2196
[27]. Yoichi, H., and Yutaka, T. 2010. Syntheses of Biodegradable Functional Polymers by Radical Ring-Opening Polymerization of 2-Methylene-1,3,6-trioxocane. Journal of Polymers and the Environment, 18(2), 116-121.
[28]. Zhe, C., Xiaoyan, L., and Xuegang, L. 2011. Study on the synthesize of thermoplastic carboxymethyl cellulose with graftcopolymerization. Journal of Chemistry, 7(1), 113-143

Alex O. Akinsanoye, Mopelola A. Omotoso, Elizabeth A. Ogunlana "Adsorbent Material from Grafting Polymethylacrylate unto Methylcellulose from Elephant (Napier) Grass Cellulose" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.49-55 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/49-55.pdf

For Full Text Click here

Share on Social media

Acceptability and Nutrient Composition of Multiple Blend Fruity Creams

Mustapha, R.A., Amodu, S.O., Olatunji, C.A.
July 2020
Page No.: 56-59

The acceptability and nutrient composition of multiple blend fruity creams were investigated. Pineapple, pawpaw, watermelon, apple and banana blends were formulated into four samples of varied ratio of fruit components. Proximate, Atomic Absorption Spectrophotometer(AAS) and organoleptic analysis was used to determined nutrients and acceptability of the samples. Results shows that titrable acidity ranged from 0.03 to 0.16 while their P^H ranged from 4.32 to 4.59, total soluble solids ranged between 12.33 to 15.00, specific gravity from 0.79 to 0.97, Ash from 0.18% to 0.49% and vitamin C contents ranged from 50.70 to 55.70mg/100g. The samples were relatively low in protein fat and zinc but high in iron, calcium and magnesium. Samples subjected to sensory evaluation revealed that there were no significant difference(p<0.05) among the multiple blend fruity cream samples with respect to colour, taste, aroma, texture and overall acceptability. Sample with the highest pineapple was the most accepted. Multiple blend fruity cream will go a long way to prevent scurvy, constipation and overweight and also serve as a substitute to milk-based ice cream.

Page(s): 56-59

Date of Publication: 25 July 2020

Mustapha, R.A.
Department of Nutrition and Dietetics, Rufus Giwa Polytechnic, PMB 1019, Owo, Ondo State, Nigeria
Amodu, S.O.
Department of Hospitality Management Technology, Rufus Giwa Polytechnic, PMB 1019, Owo, Ondo State, Nigeria
Olatunji, C.A.
Department of Hospitality Management Technology, Rufus Giwa Polytechnic, PMB 1019, Owo, Ondo State, Nigeria

References

[1]. Umesh, Rudrappa (2009). Fruits Nutrition Facts and Health Benefits.
[2]. Rudrappa, A.C. (2009): The Biochemistry of fruits and their Products 1.London & New York Academic Press.
[3]. Beeton, A.Y., Christian, I.A, Glory, E.E. (2008): A comparative Study of the Nutritive Factors and Sensory Acceptance of Juices from selected Nigerian Fruits, Croatian Journal of Food Technology, Biotechnology and Nutrition. Vol. 8. pp. 47-51.
[4]. Tamra, Andrews (2000). Nectar and Ambrosia: An encyclopedia of Food in World Mythology. California. pp. 258- 260.
[5]. Gaile, A.A. Cooney R.V., Henning SM, Custer L.J (2013): Bioavailability and antioxidant Effects of Orange Juice Components in Humans. J. Agric. Food Chem., 53 (13): 5170-5178
[6]. Krawczk E. M., Spence JD, Jordan J, Wet more S, Free-Man D.J, Piche L.A, Serratore P (2008) HDL -Cholesterol-raising effect of orange Juice in Subjects with Hypercholesterolemia. American Journal Clinical Nutrition., 72 (5): 1095-1100
[7]. Adedeji T.O., Oluwalana I.B.(2013): Physico-chemical, sensory and Microbial Analysis of wine Produced from watermelon. Journal of Food Science and Quality Management Nigeria.Vol.19. pp. 41-49. ISSN2224-6088.
[8]. Paulo, I. Hdider C. and Lenucci, M.S. (2013). Bioactive Compounds and antioxidant Activities of Different Watermelon Cultivars as Affected by Fruit sampling, Vol. 24, Seddon 3, pp. 307-314.
[9]. Marta Serrrano- Megias, antonio Jose Perez-Lopez, Estrella Nunez- Delicado, felipe Beltran, Jose Manuel (2013): Optimization of Tropical Juice Composition for the Spanish Market. Seminar of Sensory and Nutritive qualities of food. Spain, pp. 1-6.
[10]. AOAC (2005). Official Methods of Analysis (22nd Edition). Association of Official analytical Chemists. Washington USA.
[11]. Snedecor, T.W. (1956). Encyclopedia Dictionary: Fruit. pp. 16- 282 ISBN 978-1-56022 - 950-6
[12]. Udugwu A.J., Vinyard B.T., Wiley E.R. (2009):Consumption of watermelon Juice Increases Plasma Concentration of lycopene and beta-Carotene in Humans. Journal of Nutrition, 133 (4). pp.1043-1050.
[13]. Nidhi M.J., Negrao M.R., Azevedo I. (2008). Watermelon: The Value of Higher Plama Arginine Concentration. Nutrition Journal, Vol. 23, Issue 6, pp. 517.
[14]. Hon, R. Thomas, L. and Thomas Elliot (2001). Botany: A Brief introduction of plant biology. New York: Wiley. Pp. 135-37. ISBN 0-471-02114-8.
[15]. Wardlaw G.M (1999). Perspectives in Nutritiion, MC Graw-Hill, USA .P. 443.
[16]. Bazzano, M.J., James, N. and Karahadian C., (2003) Evaluation of physical, Chemical and Sensory Properties of Pawpaw fruit as Indicators of ripeness. Journal of Agricultural and Food Chemistry, Vol 52,Pp. 255-262.
[17]. Jules Janick, James N, Cummins, Susan K., Brown, MinouHemmat (1996). Chapter 1: Apples. Wiley and Sons Inc. P. 9. ISBNO-471-31014 - X.
[18]. Ogbona, A. R., Geraldo, E.B., Deborah, S.G. (2013). Semina: comparison of Acceptability of Tropical Fruit Mixed Nectars. Landrina, V.34, n.5, pp.2307-2316.
[19]. Nnam N.M., Njoku I. E (2005). Production and Evaluation of Nutrient and sensory Properties of Juices made from citrus fruits.Nigerian Journal of Nutrition Science. Vol. 26. pp. 62-66.
[20]. Augustine S.I, Hassan LEA, Sirat H.M (2013). Anti-inflammatory activities of Cucurbitacin E. isolated from Citrulluslanatus Var. citroides: Journal of Human Nutrition,82 (8): 1190-1197.

Mustapha, R.A., Amodu, S.O., Olatunji, C.A. "Acceptability and Nutrient Composition of Multiple Blend Fruity Creams " International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.56-59 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/56-59.pdf

For Full Text Click here

Share on Social media

Factors Influencing Exclusive Breastfeeding (EBF) Practices among Female Health Workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State, Nigeria

Kehinde P. Ajewole, Deborah F. Olorunfemi, Remilekun E. Alabi, Vincent G. Jemilohun, Olubunmi R. Olagoke
July 2020
Page No.: 60-66

Background and Purpose: Exclusive breastfeeding means babies are given only breast milk and nothing else; no other milk, food, drink, not even water for one day (24hrs) before the survey was conducted. It prevents 13% of childhood mortality; i.e. at least 1.2 million children worldwide would be saved every year. The purpose of this study was to investigate the factors influencing exclusive breastfeeding practices among female health workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State. Methodology: A descriptive cross-sectional study was carried out on 150 healthcare workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State. Data were collected by a self-administered questionnaire. The first part of the questionnaire included questions about socio demographic characteristics of respondents while the other five parts of the questionnaire consisted of practice of exclusive breastfeeding, factors influencing practice of exclusive breastfeeding, duration of maternity leave and practice of exclusive breastfeeding, method of delivery and practice of exclusive breastfeeding and availability of help at home and practice of exclusive breastfeeding respectively. The instrument for data collection was validated questionnaire with reliability coefficient of 0.80, using Cronbach’s alpha test. Data analysis, including descriptive and analytical statistics was performed using SPSS ver. 23. A P≤0.05 was considered statistically significant. Results: The findings showed that majority of the respondents had high knowledge and are practicing exclusive breast feeding (171, 57%). The overall practice was highly adequate. There was a significant relationship between the duration of maternity leave and practices of exclusive breastfeeding, type of delivery and practices of exclusive breastfeeding and homes availability of help at home and practices of exclusive breastfeeding. Conclusion: The present study showed a high practicing of Exclusive Breastfeeding among female health workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State. Intensive awareness creation on benefits of exclusive breast feeding should be carried out for mothers during ante-natal period.

Page(s): 60-66

Date of Publication: 26 July 2020

Kehinde P. Ajewole
Department of Statistics, Ekiti State University, Ado-Ekiti, Ekiti State Nigeria
Deborah F. Olorunfemi
Department of Mathematics & Statistics, Federal Polytechnic, Ado-Ekiti, Ekiti State, Nigeria
Remilekun E. Alabi
Department of Mathematics & Statistics, Federal Polytechnic, Ado-Ekiti, Ekiti State, Nigeria
Vincent G. Jemilohun
Department of Business Administration and Management, Afe Babalola University, Ado-Ekiti, Ekiti State, Nigeria
Olubunmi R. Olagoke
Department of Mathematics & Statistics, Federal Polytechnic, Ado-Ekiti, Ekiti State, Nigeria

References

[1]. Aroona Sabin, Farida Manzur, Salaam Adil.(2017).Exclusive Breastfeeding Practices in Working Women Of Pakistan: A Cross Sectional Study. Pak J Med Sci. 2017:Vol 33(No 5)Www.Pjms.Com.Pk
[2]. American Academy of Pediatrics. (2012). Breastfeeding and the Use of Human Milk. Pediatrics, 129 (3), E827-E841
[3]. Andy Emmanuel. A Literature Review Of The Factors That Influence Breastfeeding: An Application Of The Health Believe Model. International Journal of Nursing and Health Science. Vol. 2, No. 3, 2015, Pp. 28-36.
[4]. Croyle Rt. Theory at A Glance: Application To Health Promotion And Health Behavior (Fourth Edition). U.S. Department Of Health And Human Services, National Institutes Of Health, 2015. Available At Www.Thecommunityguide.Org
[5]. Guendelman, S., Lang, J., Pearl, M., Graham, S., Goodman, J. & Kharrazi, M. 2019.Juggling Work And Breastfeeding: Effects Of Maternity Leave And Occupational Characteristics. Official Journal Of The American Academy Of Pediatrics, 123: 38-46.
[6]. Haider, R., Ashworth, A., Kabir, I. & Huttly,S.R. 2000. Effets Of Community-Based Peer Counselors On Exclusive Breastfeeding Practices In Dhaka Bangladesh. The Lancet, 356: 1643-1647
[7]. Kramer, M.S., 2013. Infant Growth And Health Outcomes Associated With 3 Compared With 6 Months Of Exclusive Breastfeeding. American Journal Of Clinical Nutrition 78: 291-5
[8]. Kramer, M.S., Kakuma, R. 2012. The Optimal Duration Of Exclusive Breastfeeding: A Systematic Review.Http://Www.Who.Int/Nutrition/Publications
[9]. Madhavi1, D. Manikyamba2international Journal Of Contemporary Medical Research Issn (Online): 2393-915X; (Print): 2454-7379 | Icv: 50.43 | Volume 3 | Issue 6 | June 2016
[10]. Motee & Jeewon, Curr. Res. Nutr Food Sci Jour., Vol. 2(2), 56-72 (2014).
[11]. Nouffan Danielle Gladzah 2013 CHALLENGES Of Exclusive Breastfeeding Among Female Health Workers In Two Hospitals In Accra University Of Ghana Http://Ugspace.Ug.Edu.Gh
[12]. Ojong Idang Neji, Chiotu Catherine Nkemdilim, Nlumanze Faith Ferdinand. 2015 Factors Influencing The Practice Of Exclusive Breastfeeding Among Mothers In Tertiary Health Facility In Calabar, Cross River State, Nigeria. American Journal of Nursing Science. Vol. 4, No. 1, 2015, Pp. 16-21. Doi: 10.11648/J.Ajns.20150401.13
[13]. Sadoh, A.E., Sadoh, W.E. & Oniyelu, P. 2011. Breastfeeding Practice among Medical Women In Nigeria. Niger Med J, 52(1): 7-12
[14]. Uchendu, U.O., Ifekuma, A.N. & Emodi, I.J.2019. Factors Associated With Exclusive Breastfeeding Among Mothers Seen At The University Of Nigeria Teaching Hospital. S A Journal of Child Health, Vol 3
[15]. Utoo, B.T., Ochejele, S., Obulu, M.A., & Utoo, P.M. 2012. Breastfeeding Knowledge and Attitudes Among Health Workers In A Health Care Facility In South-South Nigeria: The Need For Middle Level Health Manpower Development. Htpp://Www.Internationalbreastfeedingjournal.Content/7/1/17
[16]. Wikipedia Article; diagram of health belief model accessed on 23/06/2019
[17]. World Health Organization. 2013. The Global Strategy For Infant And Young Child Feeding, Geneva, Who
[18]. World Health Organization. 2018. Indicators For Assessing Infant And Young Child Feeding Practices, Report On Informal Meeting, Washington D.C., Who

Kehinde P. Ajewole, Deborah F. Olorunfemi, Remilekun E. Alabi, Vincent G. Jemilohun, Olubunmi R. Olagoke "Factors Influencing Exclusive Breastfeeding (EBF) Practices among Female Health Workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State, Nigeria" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.60-66 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/60-66.pdf

For Full Text Click here

Share on Social media

Sales Forecasting Using Prediction Analytics Algorithm

A. Gokilavani, T. P. Banupriya, S. Bhagavathi, A. Divya Bharathi, T. Tamilselvan
July 2020
Page No.: 67-70

“Sales forecasting using prediction analytics algorithm” is planned for providing a complete analysis of sales forecasting. Sales forecasting is an important aspect of different companies engaged in retailing, logistics, manufacturing, marketing and wholesaling. It allows companies to efficiently allocate resources, to estimate achievable sales revenue and to plan a better strategy for future growth of the company. In this project, prediction of sales of a product from an outlet is performed via a two-level approach that produces better predictive performance compared to any of the popular single model predictive learning algorithms. The approach is performed on Departmental store. The proposed approach was organized into six stages, first is data collection, which includes collecting data and dataset, second is hypothesis definition, which used to analyse the problems, third is data exploration which used to explore the uniqueness of the data, fourth is data cleaning, which is used to detect and correct the inaccurate dataset, fifth is data modelling, which is used to predict the data using machine learning techniques, sixth is feature engineering, which is used to import the data from machine learning algorithm.

Page(s): 67-70

Date of Publication: 27 July 2020

A. Gokilavani
Associate Professor, Jai Shriram Engineering College, Tamil Nadu, India
T. P. Banupriya
Student, Jai Shriram Engineering College, Tamil Nadu, India
S. Bhagavathi
Student, Jai Shriram Engineering College, Tamil Nadu, India
A. Divya Bharathi
Student, Jai Shriram Engineering College, Tamil Nadu, India
T. Tamilselvan
Student, Jai Shriram Engineering College, Tamil Nadu, India

References

[1]. Box G.E, Jenkins G.M, Reinsel G.C, Ljung G.M, Time Series Analysis.
[2]. Chatﬁeld C, Time-Series Forecasting; Chapma and Hall/CRC: Boca Raton, FL, USA, 2014.
[3]. Doganis P, Alexandridis A, Patrinos P, Sarimveis H, Time series sales forecasting for short shelf-life food products based on artiﬁcial neural networks and evolutionary computing. J. Food Eng,2016.
[4]. Efendigil T, Önüt S, Kahraman C, A decision support system for demand forecasting with artiﬁcial neural networks and neuro-fuzzy models: A comparative analysis. Expert Syst. Appl,2017.

A. Gokilavani, T. P. Banupriya, S. Bhagavathi, A. Divya Bharathi, T. Tamilselvan "Sales Forecasting Using Prediction Analytics Algorithm" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.67-70 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/67-70.pdf

For Full Text Click here

Share on Social media

Comparison of Technical Efficiency across Scale of Paddy Processing in Adamawa State, Nigeria

Gabdo, B. H., Ntasimda, S., Madu, U. A.
July 2020
Page No.: 71-78

This study analyzes technical efficiency across small, medium and large scale paddy processors in Adamawa State, Nigeria. Multi-stage sampling techniques was employed to select one hundred and sixty respondents with the aid of well-structured questionnaire. Data Envelopment Analysis (DEA) was used to analyze the data collected. On average, the large scale was adjudged the most efficient processors, then the medium scale, while the small scale was found to be the least efficient processors. Results further show the presence of both managerial and scale inefficiency in the small scale paddy processing, while the medium and large scale paddy processing both harbor only scale inefficiency with no evidence of managerial inefficiency. In terms of scale efficiency, on average, the small scale processors are more efficient, followed by the large scale processors, while the medium scale processors are the least efficient. The return to scale assumption indicates that 100% of the processors in both medium and large scale operate at increasing returns to scale, while in the small scale, 91% and 9% of the processors operates at increasing and decreasing returns to scale respectively. Up-scaling and down-scaling of paddy processing are recommended to curb the menace of scale inefficiency. On the other hand, good management practices such as choice of kernel size, ensuring maturity of kernels and imbibing modern parboiling skills among others will help curb the menace of managerial inefficiency. These remedial measures will together enhance frontier paddy processing in Adamawa State.

Page(s): 71-78

Date of Publication: 27 July 2020

Gabdo, B. H.
Department of Agricultural Economics and Extension, Adamawa State University, P. M. B. 25, Mubi, Adamawa State, Nigeria
Ntasimda, S.
Department of Agricultural Economics and Extension, Adamawa State University, P. M. B. 25, Mubi, Adamawa State, Nigeria
Madu, U. A.
Department of Agricultural Economics and Extension, Adamawa State University, P. M. B. 25, Mubi, Adamawa State, Nigeria

References

[1]. Adebayo, A. A., Zimba, A. A., Ray, H. H. and Dayya, S. V. (2012). Climate Change in Adamawa State, Nigeria: Evidence from Agro-Climatic Parameters. Adamawa State University Journal of Scientific Research (ADSUJR), 12 (2): 1-18.
[2]. Akaeze, Q. O. (2010). Consumer Preference for Imported Rice in Nigeria – Perceived Quality Differences or Habit Persistence? Unpublished Master Thesis. Michigan State University. 127pp.
[3]. Alizandeh, M. R. and Rahmati, M. H. (2011). Effect of Paddy Dehusking Rate in Rubber roll Sheller on the Milling Quality of Different Rice Varieties. Resource Journal. Biological. Science, 6(4): 153-157.
[4]. Akpokodje, G., Lancon, F. and Erenstein, O. (2001). Nigeria’s Rice Economy State of the Art. Paper presented at the Nigerian Institute for Social and Economic Research (NISER)/West African Rice Development Association (WARDA), Nigeria Rice Economy Stakeholders Workshop, Ibadan, 8-9 November, 55pp.
[5]. Banker, R., Charnes, A. and Cooper, W. (1984). Some Models for Estimating Technical and Scale inefficiencies in Data Envelopment Analysis. Management Science, 30, 1078–1092.
[6]. Battese,G. E. and Coelli, T. J. (1992).Frontier Production Functions, Technical Efficiency and Panel Data: With Application to Paddy Farmers in India,” Journal of ProductivityAnalysis,3 (1/2):153-169.
[7]. Battese, G.E. and Coelli, T.J. (1995). A Model for Technical Inefficiency Effects in Stochastic Frontier Production for Panel Data. Empirical Economics, 20:325-345.
[8]. Bokusheva, R. and Hockmann, H. (2006). Production Risk and Technical Inefficiency in Russian Agriculture. European Review of Agricultural Economics, 33 (1): 93-118.
[9]. Brazdik,F.(2006).Non-parametricAnalysisofTechnicalEfficiency:FactorsAffectingEfficiency of West Java Rice Farms, CERGE-EI WorkingPaperSeriesNo.286.
[10]. Charnes, A., Cooper, W.W. and Rhodes, E. (1978). Measuring the Efficiency of Decision Making Units, EuropeanJournal of Operations Research, 2: 429- 444.
[11]. Coelli, T. J., Rao, D. S. P. and Battese, G. E. (1998). An Introduction to Efficiency and Productivity Analysis.Kluwer Academic Publishers, Boston, USA.
[12]. Farrel, J. M. (1957). The Measurement of Productive Efficiency. Journal of Royal Statistics, 120(3): 253-290.
[13]. Isa, J. O., Cyprian, C. A. and Sam, O. O. (2013). Resource use Efficiency and Rice Production in Guma Local Government Area of Benue State: An application of stochastic frontier production function. InternationalReview of Social Sciences and Humanities, 3(1):108-116.
[14]. Javed,M.I.,Adil,S.A.,Javed,M.S.andHassan, S. (2008).EfficiencyAnalysisof Rice-wheatSystem inPunjab, Pakistan. PakistanJournalof AgriculturalScience, 45 (3):95-100.
[15]. Lovell, C. A. K. (1993). Production Frontiers and Productive Efficiency. In: Fried, H. O.et al. (eds.).The measurement of productive efficiency: techniques and application. New York: Oxford University Press.
[16]. Luke, N. A., Atakelty, H. and Amin, W. M. (2012). Analysis of Farm Household Technical Efficiency. In: Northern Ghana Using Bootstrap DEA. Paper presented at the 56th annual conference of the Australian Agricultural and Resource Economics Society. The Esplanade Hotel, Fremantle WA, 7-10.
[17]. Nwalieji, H. U., Madukwe, M. C., Agwu, A. E. and Umerah, M. I. (2014). Adoption of Rice Technologies Introduced by the United State Agency for International Development in Anambra and Ebonyi States, Nigeria. Journal of AgriculturalExtension, 18(1): 143-154.
[18]. NPC (2006). National Population Commission. Report of Nigeria’s National Population Commission on the 2006 Census. Population and Development Review, 33 (1): 206-210.
[19]. Ottawa, J. (2012). Developing Model for Measuring the Efficiency of the Health System in Canada Available at www.cihi.ca
[20]. Padilla, F. M. D. and Nuthall, P.L. (2009). Technical Efficiency in the Production Sugar Cane in Central Negros Area Philippine: An Application of DEA. Journal of International Society for Southeast Asian Agricultural Science (J.ISSAAS), 15(1): 77- 90.
[21]. Padilla, F. M. D. and Nuthall, P.L. (2012).Farm Size and its Effects on the Productive Efficiency of Sugar Cane Farms.Journal of international society for Southeast Asian Agricultural Science 18(1): 49- 61.
[22]. Rahman,S.(2011).Resourceuse Efficiencyunder Self-selectivity:The Case of Bangladeshi Rice Producers. Australian Journal of AgriculturalandResourceEconomics,55(2): 273-290.
[23]. Seiford, L., and Zhu, J. (1999). Profitability and Marketability of the top 55 US commercial Banks. Management Science, 45: 1270–1288.
[24]. Terry, J., Paul, A. and Charles, E. W. (2009). Food Science Department, and Director, University of Arkansas Rice Processing Program.
[25]. Ume, S. I., Ezeano, C. I., Uwa, A. N. and Ebe, F. (2016). Analysis of Technical Inefficiency in Rice Production among Farmers in Ezza South Local Government Area of Ebonyi State of Nigeria (Application of Stochastic Frontier Production).Archives of Current Research International,5(2): 1-12.
[26]. Yuyu, T. and Hye-Jung, K. (2015). An Analysis on the Factors Affecting Rice Production Efficiency in Myanmar.Journal of East Asian Economic Integration,19 (2):167-188.

Gabdo, B. H., Ntasimda, S., Madu, U. A. "Comparison of Technical Efficiency across Scale of Paddy Processing in Adamawa State, Nigeria" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.71-78 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/71-78.pdf

For Full Text Click here

Share on Social media

Modelling Apiculture Production in Adamawa State, Nigeria: The Ordinary Least Squares Technique

Gabdo, B. H.
July 2020
Page No.: 79-83

The study adopted the famous Ordinary Least Squares (OLS) approach to model apiculture production in Adamawa State, Nigeria. The primary source method was employed for data collection from 108 apiarists in the state spread across the four agricultural zones in the state. The four OLS functional forms (Linear, Semilog, Exponential and Cobb-Douglas) were modelled as basis for selection of best fit on account of statistical, economic and econometric criteria. The apiculture data was adjudged normally distributed, free from heteroscedasticity, multi collinearity and autocorrelation, but, with model misspecification issue. The Cobb-Douglas model was adjudged the best fit owing to significance of all variables with respective apriori expected signs, highest R2 = 92%, lowest RMSE = 0.286, AIC = 41.12 and BIC = 54.53. The study shows that labor, hives, farm distance and other costs adjudged significant variables affecting the production of honey. Together, they account for 92% of the variation in honey production. The study recommends timely and judicious utilization of resources for optimal honey yield in the area.

Page(s): 79-83

Date of Publication: 26 July 2020

Gabdo, B. H.
Department of Agricultural Economics and Extension, Adamawa State University, PMB 25, Mubi, Adamawa State, Nigeria

References

[1]. Adebayo, A. A. (1999). Climate I and II. In: Adamawa State in Maps (eds. A.A. Adebayo and A.L. Tukur), Paraclete Publishers, Yola, Nigeria, 1: 10-26.
[2]. Akaike, H. (1974). A New Look at the Statistical Model Identification. Institute of Electrical and Electronic Engineering, Transaction on Automatic Control, 19 (6): 716-723.
[3]. Barnston, A. G. (1992). Correspondence among the Correlation, RMSE and Heidke Forecast, Verification Measures; Refinement of the Heidke Scores. Notes and Correspondence, 699-709
[4]. Baum, C. F. (2006). An Introduction to Modern Econometrics Using Stata. Department of Economics, Boston College, USA, Stata Press Publication, 341Pp.
[5]. Belsley, D. A., Kuh, E. and Welsch, R. E. (1980). Regression Diagnostics: Identifying Influential Data and Source of Collinearity. John Wiley and Sons, New York, 292Pp.
[6]. Chatterjee, S. and Price, B. (1977). Regression Analysis by Example. John Wiley and Sons, New York, 19-22.
[7]. Frost, J. (2019). Regression Analysis: An Intuitive Guide for using and Interpreting Linear Models.340Pp.
[8]. Gujarati, D. N. and Porter, D. C. (2 009). Basic Econometrics. 5th Edition, India, 922Pp.
[9]. Ja’afar-Furo MR, 2005. Economics of smallholder beekeeping in Adamawa State, Nigeria. Thesis for PhD, Abubakar Tafawa Balewa University, Bauchi, Nigeria (Ng).
[10]. Ja’afar-Furo MR, 2006. Analysis of costs and returns, and major constraints to beekeeping industry in Adamawa State, Nigeria. Journal of Research in Agriculture, 5(1), 14-19.
[11]. Ja’afar-Furo MR, 2007. Appraising the perception of farming communities towards adoption of apiculture as viable source of income in Adamawa State, Nigeria. Apiacta, 42, 1-15.
[12]. Ja’afar-Furo MR and Madu UA, 2017. Awareness campaign on beekeeping in institutions of learning and rural communities in Nigeria: The need for policy intervention. International Journal of Agricultural Research, Sustainability and Food Security, 3(1), 32-34.
[13]. Kass, R. E. and Raftery, A. E. (1995). Bayes Factors. Journal of American Statistical Association, 90 (430): 773-795.
[14]. Liddle, A. R. (2007). Information Criteria for Astrophysical Model Selection. Monthly Notices of the Royal Astronomical Society, 377: 74-78.
[15]. Mcquarrie, A. D. R. and Tsai, C. L. (1998). Regression and Time Series Model Selection.World Scientific Publication Company, Singapore, 455Pp.
[16]. Murray, L., Nguyen, H., Lee, Y., Remmenga, M. and Smith, D. (2012). Variance Inflating Factors in Regression Models with Dummy Variables. Conference on Applied Statistics in Agriculture, Kansas State University, 19Pp.
[17]. NHB (1998). National Honey Board. http//www.honey.com.
[18]. Ojeleye B, 1999. Foundation of Beekeeping in the Tropics. Center for Beekeeping Research and Development (CEBRAD), Ibadan, Nigeria, pp. 186-197.
[19]. Schwarz, G. (1978). Estimating the Dimension of a Model. Annals of Statistics, 6 (2): 461-464
[20]. Shahbandeh, M. (2020). Agriculture: Farming, Number of Beehives Worldwide from 2010 to 2018. Statista. http//www.statista.com.
[21]. Thomas, M. G. and Schumann, D. R. (1992). Non-wood Forest Products from Temperate Broad- leaved Trees: In William M. C. (2002). Food and Agricultural Organization, Technical Report.
[22]. Yafee, R. A. (2012). Robust Regression Modelling with Stata. Lecture Note. Statistics, Social Science and Mapping Group Academic Computing Services, 93Pp.

Gabdo, B. H. "Modelling Apiculture Production in Adamawa State, Nigeria: The Ordinary Least Squares Technique" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.79-83 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/79-83.pdf

For Full Text Click here

Share on Social media

Activity Concentration Levels of Natural Radionuclides in the Sediment Samples from Rosterman Gold Mine, Lurambi Sub – County, Kakamega County, Kenya

Conrad Khisa Wanyama, Fred Wekesa Masinde, John Wanjala Makokha
July 2020
Page No.: 84-87

Rosterman, located in Lurambi sub - county, Kakamega County, Western Kenya consists of gold mining that is done locally (artisanal gold mining). The activity concentration of ²³⁸U, ²³²Th and ⁴⁰K in sediment samples from the wastes of gold mining were determined by gamma ray spectrometry using NaI (Tl) detector and decomposition of measured gamma-spectra. As a measure of radiation hazard to the general population, gamma radiation dose rates were also evaluated. The average activity concentrations of ²³⁸U, ²³²Th and ⁴⁰K were 85±2.24, 114±5.78and 260±12.18Bqkg^-1, respectively. The mean absorbed dose rate in air was 52.5±4.2nGyh^-1 while the annual average effective dose rate for indoor and outdoor were 0.4±0.02 and 0.3±0.01mSvy^-1 respectively. The absorbed dose rate due to gamma radiation from naturally occurring radioactive materials was below the global average value of 60 nGyh^-1. Hence, mining of gold at Rosterman has minimal hazardous health implication to the general public.

Page(s): 84-87

Date of Publication: 01 August 2020

Conrad Khisa Wanyama
Department of Science, Technology and Engineering, Kibabii University, P.O BOX 1699-50200 Bungoma, Kenya
Fred Wekesa Masinde
Department of Physical Sciences, University of Kabianga, P.O BOX 2030-20200 Kericho, Kenya
John Wanjala Makokha
Department of Science, Technology and Engineering, Kibabii University, P.O BOX 1699-50200 Bungoma, Kenya

References

[1]. UNSCEAR, (2008). United Nations Scientific Committee on the effects of atomic radiation, sources, and effects of ionizing radiation. Report to General Assembly, with Scientific Annexes United Nations. United Nations, New York.
[2]. Kamunda, C., Mathuthu, M., and Madhuku, M. (2016). An Assessment of Radiological Hazards from Gold Mine Tailings in the Province of Gauteng in South Africa. International Journal of Environmental Research and Public Health. 13(1): 138.
[3]. UNSCEAR. (2017). Sources and Effects of Ionizing Radiation. Report to General Assembly, with Scientific Annexes, United Nations, New York.
[4]. UNSCEAR. (2010). Sources and effects of ionizing radiation. Report to the General Assembly, with scientific annexes. New York: United Nations.
[5]. Otwoma, D., Patel, J.P., Bartilol, S., and Mustapha, O.A. (2013). Estimation of annual effective dose and radiation hazards due to natural radionuclides in mount Homa, southwestern Kenya. Radiation protection dosimetry. 155(4): 497-504.
[6]. Kebwaro, M. J., Rathore,S.V., Hashim, N.O., & Mustapha, A.O. (2011). Radiometric assessment of natural radioactivity levels around Mrima Hill, Kenya. International Journal of the physical sciences. 6(13): 3105-3110.
[7]. Kinyua R., Atambo V. O. and Ongeri R. M. (2011). Activity concentrations of 40K, 232Th and 228Ra and radiation exposure of Tabaka soapstone quarries of the Kisii region, Kenya. African Journal of Environmental Science and Technology, 5:682-688.
[8]. Hashim, N. O., Rathore, I. V. S., Kinyua, A. M., & Mustapha, A. O. (2004). Natural and artificial radioactivity levels in sediments along the Kenyan coast. Radiation physics and chemistry, 3(71), 805-806.
[9]. Achola, S. O., Patel, J. P., Angeyo, H. K., & Mustapha, A. O. (2010). Natural radioactivity and associated radiation characteristic of the new high background radiation area of lambwe east southern Kenya
[10]. IAEA. (2010). Handbook of parameter values for the prediction of radionuclide transfer in terrestrial and freshwater environments: International Atomic Energy Agency.
[11]. Wanyama, C. K. Makokha, W.J and Masinde W.F. (2020). A Radiological Survey in Tailings: A Case Study of Rosterman Gold Mine, Western Kenya. Open Access Library Journal, 7(05), 1.
[12]. Mustapha, A. O., Patel, J. P., and Rathore, I. V. S. (1999). Assessment of Human Exposures to Natural Sources of Radiation in Kenya. Radiation Protection Dosimetry. 82(4): 285–292.
[13]. UNSCEAR (2000). United Nations Scientific Committee on the effects of atomic radiation,sources, and effects of ionizing radiation. Report to General Assembly, with Scientific Annexes United Nations. United Nations, New York.
[14]. Tsai, T., Lin, C., Wang, T. and Chu, T. (2008). Radioactivity concentrations and dose assessment for soil samples around nuclear power plant IV in Taiwan. Journal of Radiological Protection. 347: 347–360.
[15]. International Commission on RadiologicalProtection. Occupational Intakes of Radionuclides: Part 1. (Oxford: ICRP; Publication) p. 130 (2015).
[16]. Bendibbie M. M., David M. M and Jayanti P. P. (2013). Radiological analysis for suitability of Kitui south limestone for use as a building material. International Journal of Fundamental Physical Sciences. 3:32-35.
[17]. International Commission on Radiological Protection. (ICRP), Radiation Protection Dosimetry. ICRP 2007 Recommendations. Vol. 37. (Oxford: Pentagon Press. ICRP Publication 103. Ann. ICRP) pp. 2–4 (2007).
[18]. ICRP. (2005). Low-dose extrapolation of radiation related cancer risks. International Commission on radiological protection. Oxford: Pentagon press.
[19]. Beretka, J., & Matthew, P. (1985), Natural radioactivity of Australian building materials, industrial wastes, and by-products. Health physics, 48(1), 87.

Conrad Khisa Wanyama, Fred Wekesa Masinde, John Wanjala Makokha "Activity Concentration Levels of Natural Radionuclides in the Sediment Samples from Rosterman Gold Mine, Lurambi Sub – County, Kakamega County, Kenya" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.84-87 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/84-87.pdf

For Full Text Click here

Share on Social media

Environmental Regulations in Nigeria: A Lesson from United Kingdom

Benson Polycarp, Bashayi Obadiah, Ebuga Emmanuel Attah
July 2020
Page No.: 88-93

Environmental regulation is seen as an imposition of limitations or tasks on individuals, corporations and other entities for the purpose of preventing environmental damage or improving degraded environment. The paper is a reviewed work on environmental regulations in Nigeria and the possible lesson to be learnt from the United Kingdom experience. Methodology employed for this study is the used of secondary data which were sourced from textbooks, internet journals and environmental publications relevant to the reviewed work. Data were presented in form of figures or snapshots and table. The main observation has shown some level of changes in Nigeria regulatory nomenclature with little change in improves functions of the system. The paper has recommended among several issues that the regulatory body improve on information exchange and feedback mechanisms between the Regulatory Agency, the Industries and the Regulated Communities.

Page(s): 88-93

Date of Publication: 01 August 2020

Benson Polycarp
Department of Urban and Regional Planning, Nasarawa State Polytechnic, Lafia, Nigeria
Bashayi Obadiah
Department of Urban and Regional Planning, Nasarawa State Polytechnic, Lafia, Nigeria
Ebuga Emmanuel Attah
Department of Urban and Regional Planning, Nasarawa State Polytechnic, Lafia, Nigeria

References

[1]. Adegoke, A. (1991): The Challenges of Environmental Enforcement in Africa: The Nigerian Experience. [Online] available at:www.inece.org/3rdvol1/pdf/adegoro. Accessed on 30-06-2019
[2]. Bell, S. and McGillivray, P. (2008): Environmental law: 7th ed. Oxford. Oxford University Press
[3]. Humphery, O. (2010): The deep horizon spillage and the lessons in liability claims for Nigeria: [online] available at: www.thenigeriabusiness.com/column22.html. Accessed on 6-06-2019
[4]. Ladan, M.T. (2009): Law Cases and Policies on Energy, Minerals Resources, Climate Change, Environment, Water, Maritime and Human Right in Nigeria: Zaria. Ahmadu Bello University Press. [Online] available at:www.uniabujalawclinic.com/SharedFiles/Download.aspx?...16.Accessed on 01-05-19
[5]. McEldowney, F.J and McEldowney, S. (2001): Environmental Law and Regulation: London. Blackstone Press.
[6]. McManus, P. (2009): International Encyclopaedia of Human Geography.
[7]. Stallworthy, M. (2008):Understanding Environmental Law: London. Sweet and Maxwell.
[8]. Wolf, S., White, A., and Stanley, N. (2002): Principles of Environmental Law: 3rd ed. London. Cavendish Publishing Limited.
Bibliography
[9]. Laws of the Federation of Nigeria, Federal Environmental Protection Agency (Amendment) Decree,No 59 of 1992. [Online] available at .www.nigeria-law.org/ pdf.. Accessed on 02-4-2019
[10]. National Environmental Standard Regulations Enforcement Agency; (2008). What is Historical background of federal environmental agencies in Nigeria [online] available at. www.nesrea.org/faq.php pdf. Accessed 03-04-2019.

Benson Polycarp, Bashayi Obadiah, Ebuga Emmanuel Attah "Environmental Regulations in Nigeria: A Lesson from United Kingdom" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.88-93 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/88-93.pdf

For Full Text Click here

Share on Social media

Optimum Dietary Crude Protein and Digestible Energy Requirements for fingerlings of Hybrid Clariid catfish Heterobranchus bidorsalis♀ X Clarias gariepinus♂ in the Tropics

B.S. Aliu, J.M. Olomu
July 2020
Page No.: 94-99

This study was carried out to determine the optimum dietary crude protein and digestible energy requirements for the Heterobranchus bidorsalis♀ X Clarias gariepinus♂ fingerlings. The general objective of the study was to determine the optimum protein and digestible energy levels for the Clariid catfish fingerlings, Heterobranchus bidorsalis♀ X Clarias gariepinus♂, using locally sourced feed inputs. Heterobranchus bidorsalis♀ X Clarias gariepinus♂ fingerlings were reared from hatchlings to five weeks old. Sixteen practical diets were formulated and used in the feeding trials. The diets were made up of four digestible energy levels (2400, 2600, 2800 and 3000Kcal/Kg), each at four crude proteins levels (25, 30, 35 and 40%) and were fed to the fingerlings for 70days in three replicates for each treatment. Weekly data were collected based on weight gain and feed consumption. Feed and fish carcasses were analyzed for proximate composition of the fingerlings. All data collected were subjected to two-way analysis of variance (ANOVA) test at 5% probability level. The total weight gain of fingerlings increase in dietary protein levels at all energy levels used in the experiment. The increases were significant in all but one and which was that between 35% and 40% crude protein at the DE of 3000kg/kg diet. The highest total weight gain (148.84/4) was obtained in fish led with the diet containing 40% crude protein at digestible energy of 2400kcal/kg diet. The values obtained at 40% crude protein and DE of 2400kcal/kg diet were significantly different (P<0.05) from those obtained on all the other dietary protein and energy levels treatments. The lower protein levels (25 and 30%) resulted in very low weight gain. The trends in effects of dietary treatments on SGR, RGR and RWG were similar to those described for weight gain. At dietary protein levels of 35% and 40%, the amounts of feed consumed were significantly higher than those recorded at dietary protein levels of 25% and 30%. At DE of 2400 and 2800kcal/kg, the amounts of feed consumed by fish fed with the 35% crude protein diets were significantly lower than those of fish fed with the diet containing 40% crude protein. However, at DE of 2600 and 3000kcal/kg. FCR values increased with increase in dietary crude protein level and decreased with increase in dietary energy level with the exception of 2800kcal/kg diet while the PER Values decreased with increase in dietary protein levels. Protein intake increased with increases in protein level while protein intake decreased with increases in caloric intake.

Page(s): 94-99

Date of Publication: 09 August 2020

B.S. Aliu
Department of Fisheries, University of Benin, Benin-City, Nigeria
J.M. Olomu
Department of Fisheries, University of Benin, Benin-City, Nigeria

References

[1] Akolisa, O. and Okonji, V. A. (2005). Increase fish supply through genetically modified fish: Need for caution in Nigeria. Proceeding of the 39th annual conference of the Agricultral Society of Nigeria, p. 64-67.
[2] Aremu, M. (2006). A Comparative Study on the Chemical and Amino acid Composition of some Nigerian Under-Utilized Legume Flour. Pakistan journal of nutrition 5 (1):35
[3] Babatunde, G. M., Olomu, M. J. and Oyenuga, V. A. (1972). Determination of the Optimum crude protein requirement of pigs in a tropical environment, Anim Prod. 14: 57 67.
[4] Cowey, C.B. and Tacon, A.C.J. (1985). Protein and amino acid requirements. In: P. Tytler and P. Calow (eds.) Fish energetic: New perspectives, Croom Helm Press, London pp. 155 - 184.
[5] Cowey, C.B., Pope, J.A., Adron, J.W. and Blair, A. (1974). Studies on the nutrition of marine flatfish. The protein requirement of the plaice (Pleuronoencies platessa). Br. J. Nutr., 28: 447- 456.
[6] Dada, A.A.; Fagbenro, O.A. and Fasakin, E.A. (2001). Efects of varying stocking density on growth and survival of an Clariid Catfish, Heterobranchus bidorsalis fry in indoor concrete tanks. J. of Fisheries Technology. 2: 107-116.
[7] FAO. (2003). Fisheries statistics. http://www.fao.org. Accessed 13/01/2006.
[8] Fasakin, E. A, Balogun, A. M and Ajayi, O. O. (2003). Evaluation of Full fat and diffatie maggot meals in the feeding of clariid catfish Clarias gariepinus. Aquactic Research 34(9): 733-738.
[9] Gabriel, U.U., Akinrotimi, O.A, Bekibele, D.O., Onunkwo, D.N. and Anyanwu, P.E. (2007). Locally produced fish feed: potentials for aquaculture development in Sub-Saharan Africa. African Journal of Agricultural Research. 2(7): 287-295.
[10] Goldstein, L. and Forster, R.P. (1970). Nitrogen metabolism in fishes: In: J. W. Campbell, ed. Comparative biochemistry of nitrogen metabolism vol. 2 the vertebrates. Academic Press. New York and London. 495- 518 pp.
[11] Hogendoorn, H. (1983). Growth and production of the African catfish, Clarias lazera (C and V.) II. Bioenmergetic relations of body weight and feeding level. Aquculture 24: 123-131.
[12] Jauncey, K. (1982). The effect of varying dietary level on the growth, food conversion, protein utilization and body composition of juvenile tilapia (Sarotherodon massambicus) Aquaculture 27: 43 54.
[13] Lovell, R.T. (1984). Energy Requirement: In E.H. Robinson and R.T. Lovell, (Eds.) Nutrition and Feeding of Channel Catfish; A Report from Nutrition Sub- Committee, Southern Co-operative Bulleting No. 296: 12-14.
[14] Lovell, R.T. (1989). Nutrition and feeding of fish. Auburn University, AuDu Alabama. 260 pp.
[15] Madu, C.T. (1992). Optimum protein dietary level for the practical feed of mudfish, Clarias anguillaris fingerlings. Proceedings of the National Conference on Two Decades of research in Lake Kainji (J. S. O. Ayemi and A. A. Olatinde, Eds.) National Institute for freshwater Fisheries Research New Bussa Niger State, Nigeria pp 139 147.
[16] Martinez-Palacios, C.A., M. Harfush-Melendez, C., Chavez-Sandchez and Ross, L.G. (1996). The optimum dietary protein level for the Mexican cichlid, Cichlasoma urophthalmus (Gunther): A comparison of estimates derived from experiments using fixed-rate feeding and satiation feeding: Aquaculture Nutrition, 2: 1, 11 -21.
[17] Martinez-Palacios, P.C.A. and Ross, L.G. (1986). The Effect of Temperature, body weight and hypoxia on the oxygen consumption of the Mexican mojarra, Cichlasoma urophthalmus (Gunter). J. Aquaculture Fisheries Management 17: 243-248
[18] Murray, M.W.. Andrews, J.W. and Deloach, H.L. (1977). Effects of dietary lipids dietary protein and environmental emperature on groOwth, feed conversion and body composition of channel catfish. J. Nutr. 107: 272-280
[19] N.R.C., (1993).Nutrient Requirement of Fish. National Research Council. National Academic Press, Washington. 140 p.
[20] New, M.B. (1987). Feed and Feeding of Fish and Shrimp. Aquaculture Development and Co-ordination Programme ADCPIREPIS7126, 275pp.
[21] Olomu, J.M. (2011). Monogastric Animal Nutrition St. Jackson Publishing Benin City Nigeria pp. 125 - 205.
[22] Piper, L.G.; Holdzclaw, K.W.; Green, B.D. and Blumberg, W.A.M.B. (1989). Experimental determination of the Einstein coefficients for the N (B - A) Transition. J. Chem. Phys. 90: 5337-5339 .
[23] Raj, A. J. A., Haniffa, M. A., Seetharaman, S. and Appelbaum, S. (2008) Utilization of various dietary carbohydrate levels by the freshwater catfish Mystus montanus (Jerdon). Turkish Journal of Fisheries and Aquatic sciences 8: 31-35.
[24] Robinson, E. H., Menghe, H. L. and Hogue, C. D. (2006). Catfish Nutrition: Nutrient Requirements. Extension Service of Mississippi State University. Publication 2412. Pp 1-4.
[25] Robinson, E.H., Menghe, H.L. and Manning, B.B. (2001). A Practical Guide to Nutrition Feeds and Feeding of Catfish. Bulletin 1113. Office of Agricultural Communications, Division of Agriculture, Forestry and Veterinary Medicine, Mississippi State University, U.S.A. Pp. 39.
[26] Tucker, V.A. (1969). The Energetics of Bird. Flight Sci. Am. 200: 70.

B.S. Aliu, J.M. Olomu "Optimum Dietary Crude Protein and Digestible Energy Requirements for fingerlings of Hybrid Clariid catfish Heterobranchus bidorsalis♀ X Clarias gariepinus♂ in the Tropics" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.94-99 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/94-99.pdf

For Full Text Click here

Share on Social media

A Conceptual of Supply Chain Management Distribution System to Minimize Leadtime and Distribution Fees in Retail Industry

Umi Marfuah, Mutmainah, Rina Nopianti
July 2020
Page No.: 100-103

PT ABCD is a company engaged in retail in the form of shoe products. The study was conducted in August 2018 until January 2019 in the Logistics and distribution division. The problem that predominates in this division is the problem of delays in the distribution of goods because the distribution process is still done conventionally with improvised methods and human resources. In August 2018 the amount of costs incurred was Rp.1,766,725,193 and experienced an average increase of 4% every month. From the observational data, the leadtime achieved was still below the company's target of 80%, the average delay percentage was 6% or 4926 koli from 74660 koli. With the Supply Chain Management distribution method, including the Crossdocking, Direct Shipment and Warehousing methods. By comparing the three methods the lowest leadtime is generated and simulating it, the right method for the company is obtained, namely the cross docking distribution method with the results of the fastest lead time calculation, which is 240 minutes faster than the other methods. And from the simulation a result also produced the same method with the achievement of 149.48 minutes lead time and has the smallest percentage of error values that is 38%.

Page(s): 100-103

Date of Publication: 10 August 2020

Umi Marfuah
Department of Industrial Engineering, Muhammadiyah University, Jakarta Jl. Cempaka Putih Tengah 27 Jakarta Pusat
Mutmainah
Department of Industrial Engineering, Muhammadiyah University, Jakarta Jl. Cempaka Putih Tengah 27 Jakarta Pusat
Rina Nopianti
Department of Accounting, Bina Bangsa University, Serang

References

[1] Pujawan, management Supply Chain Management, ITS, 2010
[2] I Nyoman,P., dan Mahendrawati, E.R., 2010, “Supply Chain Management”, Edisi Kedua, PT. Guna widya, Surabaya.
[3] Willem Siahaya 2013, Supply hain Management access demand chain management, inmedia Jakarta.
[4] Prof. Ir. I Nyoman Pujawan, supply Chain Management, 2007.
[5] Josef Hernawan Nudu, supply chain management, 2007
[6] Eko, R., dan Djokopranoto, R., 2002, “Konsep Manajemen Supply Chain”, Strategi Mengelola Manajemen Rantai Pasokan Bagi Perusahaan Modern Di Indonesia, PT.Grasindo Anggota IKAPI, Jakarta
[7] Suko, W,.2008, “Analisis SistemDistribusi Dengan Menggunakan Manajemen Rantai” (Studi KasusPT. Jumbo Power International Cabang Solo). Tugas Akhir Teknik Industri UMS. Surakarta.
[8] Parwati Niken, Penerapan system pergudangan crossdocking pada industry retail yang sedang berkembang, Jurnal Teknik Industri, Universitas Bina Nusantara, 2012
[9] Nurhayati Enti, Supply Chain management dan Logistik Management, Jurnal Teknik Industri, Universitas Stikubank Semaang, 2013
[10] Umar Wiwi, Arsita Desi Nurlaeli, Akmal S, Analisis Leadtime pengiriman produk tekstil untuk meminimasi leadtime jalur distribusi, Jurnal Teknik Industri, FT-

Umi Marfuah, Mutmainah, Rina Nopianti "A Conceptual of Supply Chain Management Distribution System to Minimize Leadtime and Distribution Fees in Retail Industry" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.100-103 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/100-103.pdf

For Full Text Click here

Share on Social media

Automatic Engine Locking System for Drunken Driver

Abuthaheer M, Santhosh K, Varun S, Yuvaraj Anthoni V, Anandkumar A
July 2020
Page No.: 104-107

This system is aimed to prevent the road safety due to the alcohol consumption in driving. The driver condition is analysed by using alcohol sensor. If the driver is having the alcohol consumption during the driving the indicating system would intimate to them and then the vehicle speed limit is to be activated. The vehicle speed will be reduced by using l293d motor driver shield and the vehicle ignition system will turn off. After the stoppage of vehicle the system will send the vehicle latitude and longitude to the corresponding persons and nearby police station. By applying this method the road traffic should be safer than before.

Page(s): 104-107

Date of Publication: 10 August 2020

Abuthaheer M
UG Scholar, Department of Electronics and Communication Engineering, Jai shriram Engineering College, Tirupur, India
Santhosh K
UG Scholar, Department of Electronics and Communication Engineering, Jai shriram Engineering College, Tirupur, India
Varun S
UG Scholar, Department of Electronics and Communication Engineering, Jai shriram Engineering College, Tirupur, India
Yuvaraj Anthoni V
UG Scholar, Department of Electronics and Communication Engineering, Jai shriram Engineering College, Tirupur, India
Anandkumar A
Assistant Professor, Department of Electronics and Communication Engineering, Jai shriram Engineering College, Tirupur, India

References

[1]. Lea Angelica Navarro, Mark Anthony Diño, Exechiel Joson, Rommel Anacan, Roberto Dela Cruz Electronics Engineering Department, Technological Institute of the Philippines-Manila [2016, 7th International Conference on Intelligent Systems, Modelling and Simulation] - “Design of Alcohol Detection System for Car Users thru Iris Recognition Pattern”
[2]. Mugila J., Muthulakshmi.M, Santhiya K, Prof.Dhivya. P[International Journal of Innovative Research in Science Engineering and Technology (IJIRTSE) ISSN: 2395-5619,Volume – 2, Issue – 7. July 2016] - “Smart helmet system using alcohol detection for vehicle protection”
[3]. Dhivya M and Kathiravan S, Dept. of ECE, Kalaignar Karunanidhi Institute of Technology [Smart Computing Review, vol. 5, no. 1, February 2015] - “Driver Authentication and Accident Avoidance System for Vehicles”
[4]. Nimmy James, Aparna C, Tenna P John, International Journal of Research in Computer and Communication Technology, Vol 3, Issue 1, January- 2014 – “Alcohol Detection System”
[5]. Prashanth K P1, Kishen Padiyar2, Naveen Kumar P H3, K Santhosh Kumar, Dept. of Mechanical Engineering, EastWest Institute of Technology, Bangalore, India [International Journal of Engineering Research & Technology (IJERT)ISSN: 2278-0181, IJERTV3IS100754, Vol. 3 Issue 10, October- 2014] - “Road Accident Avoiding System using Drunken Sensing Technique”
[6]. Ms. SubiaSayeed, Department of Electronics and communication, VVIET, Mysore, India [International Journal of Scientific & Engineering Research Volume 2, Issue 12,December-2011 1, ISSN 2229-5518] - “Drunken drive Protection system”
[7]. N. H. T. S. Administration, "Traffic Safety Facts 2014," Alcohol-Impaired Driving, pp. 1-7, December 2015.
[8]. I. T. S. D. a. A. Group and I. T. Forum, "IRTAD road safety annual report 2015," Organisation for Economic Co-operation and Develop, 2015.

Abuthaheer M, Santhosh K, Varun S, Yuvaraj Anthoni V, Anandkumar A "Automatic Engine Locking System for Drunken Driver" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.104-107 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/104-107.pdf

For Full Text Click here

Share on Social media

Perception towards Forest Resources Utilization among Enclaves in Onigambari Forest Reserve, Oyo State

Haastrup N.O, Ayodele A.A, Fadoyin, A.S, Sangotoyinbo, O.A, Olatunji, O.A and Agboje, I
July 2020
Page No.: 108-111

The study investigated Perception toward Forest Resources Utilization among Enclaves in Onigambari Forest Reserve, Oyo State. Purposive sampling was used to select six villages around the reserve, representing 10% sampling intensity in the study area. A total of 356 questionnaires were administered. Data were analyzed using descriptive statistics. For the benefits of the forest to the community, 53%, 51%, 54% and 39% of Onigambari communities visited agreed to the fact that trees and other things from the forest are useful to human. A good number of interviewed people agreed that logging should be done twice a year. They believed that in doing this there will be sustainability of forest trees and balance in the logging process so as to allow for conservation (52%). 60% of the people quite agreed to the fact that conservation is needed for sustainability of the forest produce. 47% agreed that conserving the forest makes available lots of things needed for medicinal purpose; also 55% agreed that there is need for sensitization on the need for conserving the forest; 57% of the people that were administered the questionnaire do believe that the actions or inactions towards the forest can affect the forest negatively or positively, therefore, the need to do right by the forest is very crucial and important.

Page(s): 108-111

Date of Publication: 11 August 2020

Haastrup N.O
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria
Ayodele A.A
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria
Fadoyin, A.S
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria
Sangotoyinbo, O.A
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria
Olatunji, O.A
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria
Agboje, I
Forestry Research Institute of Nigeria, P.M.B 5054, Jericho, Ibadan, Oyo State, Nigeria

References

[1] Allendorf, 2007 T.D. Allendorf Residents' attitudes toward three protected areas in southwestern Nepal Biodivers. Conserv., 16 (2007), pp. 2087-2102
[2] Alkan, C. C. Alkan, J.M. Kidd, T. Marques-Bonet, G. Aksay, F. Antonacci, F. Hormozdiari, J.O. Kitzman, C. Baker, M. Malig, O. Mutlu, et al.Personalized copy number and segmental duplication maps using next-generation sequencing Nat. Genet., 41 (2009), pp. 1061-1067
[3] Cˆot´e SD, Dussault C, Huot J, Potvin F, Trem-blay JP, 2003. High herbivore density and boreal forest ecology: introduced white-tailed deer on Anticosti Island. In Lessons from the Islands: Introduced Species and What They Tell Us About How Ecosystems Work. Proc. Res. Group Introd. Species 2002 Conf., ed. AJ Gaston, TE Golumbia, JL Mar-tin, ST Sharpe. Queen Charlotte City, BC: Can. Wildl. Serv., Ottawa. In press
[4] Inoni OE. 2009. Effects of forest resources exploitation on the economic well-being of rural households in delta state, Nigeria. Agric Trop Subtrop. 42:20–27.
[5] Isager, Lotte & Theilade, Ida & Thomsen, Lex. (2002). People's Participation in Forest Conservation: Considerations and Case Studies.
[6] Khan, Muhammad Siddiq and Bhagwat, Shonil A. (2010). Protected areas: a resource or constraint for local people? Mountain Research and Development, 30(1) pp. 14–24.
[7] Kwaw S. Andam, Paul J. Ferraro, Alexander Pfaff, G. Arturo Sanchez-Azofeifa, and Juan A. Robalino 2008. Measuring the effectiveness of protected area networks in reducing deforestation. PNAS October 21, 2008 105 (42) 16089-16094
[8] Matthew J. Walpole and Harold J. Goodwin. 2001. Local attitudes towards conservation and tourism around Komodo National Park, Indonesia. Published online by Cambridge University Press: 10 May 2002.
[9] Nirmal Kumar, J. I. Patel, K. Kumar, R. N. and Kumar Bhoi, R (2011). An evaluation of fuel wood properties of some Aravally mountain tree and shrub species of Western India. Biomass Bioenergy 35:411–414
[10] Murphy, P. G. and A. E. Lugo. 1986. Ecology of tropical dry forests. Annual Review of Ecology and Systematics 17 : 67-88.
[11] Raghubanshi, A. S. & A. Tripathi. 2009. Effect of disturbance, habitat fragmentation and a Line invasive plant on floral diversity in dry tropical forest of Vindhyan highlands: A review. Tropical Ecology 50: 57-69.
[12] Shrestha, R.K. and J.R.R. Alavalapati 2006: Linking Conservation and Development: an analysis of local people’s attitude towards Kochi Trappa Wildlife Reserve, Nepal. Journal of Environmental Development and Sustainability 8: 69-84.
[13] Wells, M and McShane, T (2004). Integrating protected area management with local needs and aspirations. Ambio 33, 513-519.
Sunderlin, William & Angelsen, Arild & Belcher, Brian & Burgers, Paul & Nasi, Robert & Santoso, Levania & Wunder, Sven. (2005). Livelihoods, forests, and conservation in developing countries: An Overview. World Development. 33. 1383-1402. 10.1016/j.worlddev.2004.10.004.

Haastrup N.O, Ayodele A.A, Fadoyin, A.S, Sangotoyinbo, O.A, Olatunji, O.A and Agboje, I "Perception towards Forest Resources Utilization among Enclaves in Onigambari Forest Reserve, Oyo State" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.108-111 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/108-111.pdf

For Full Text Click here

Share on Social media

Evaluation of Toxicity Potentials of Heavy Metals in Camel Milk from Selected Farms in Yobe State, Nigeria

Hassan, U.F., Hassan, H.F., Baba, Haruna, Madaki, A.A., Hassan, H.F., Ibrahim, Inusa, Hassan, A.F., Muhammed, Sagir
July 2020
Page No.: 112-116

The consumption of camel milk is gaining popularity due to its medicinal and dietary properties. Camel milk has also become the major requirement of daily diets, particulary among the vulnerable groups like the infants, school going children and the old persons. The concentrations as well as the toxicity potentials of some selected heavy metals were evaluated. The concentrations of heavy metals (Zn, Fe, Cu, Co, Ni, Pb, Cd and Cr) in camel milk obtained from four different farms (Gaidam, Waro, Yusari and Yunusari of Yobe State, Nigeria) were determined using Atomic Absorption Spectrophotometric Technique. The levels (ppm) of zinc, iron, copper, cobalt, nickel, lead, cadmium and chromium were respectively found to be in the range of 4.38 (Gaidam farm) to 4.88 (Waro farm), 0.20 (Waro farm) to 0.60 (Gaidam farm), 0.74 (Yunusari farm) to 1.34 (Waro farm), 0.02 (Gaidam and Waro farms) to 0.04 (Yunusari farm), 0.27 (Yunusari farm) to 0.80 (Waro farm), 0.02 (in all the four farms), 0.012 (Gaidam farm) to 0.018 (Yusari farm) and 0.013 (Yunusari farm) to 0.02 (Gaidam and Waro farms). Comparison of the observed values with permissible limits revealed that the values are less than or equal to their corresponding permissible limits. The observed toxicity potentials of all the heavy metals indicated values that are less than 1.00 in all the farms except in Gaidam and Waro farms where their corresponding chromium toxicity potentials are 1.00 in each case. The observed values were subjected to One-Way Analysis of Variance (ANOVA) and the Least Significant Difference (LSD) test. The variations in the levels of lead, cadmium and chromium were found to be statistically the same (P ≥ 0.05), whilst the variations in the levels of zinc, iron, copper, cobalt and nickel were statistically not the same (P less than 0.05). Based on the observed toxicity potentials, it is therefore evident that consumption of camel milk samples from all the farms is safe for human consumption.

Page(s): 112-116

Date of Publication: 11 August 2020

Hassan, U.F.
Department of Chemistry, Abubakar Tafawa Balewa University, Bauchi, Bauchi State, Nigeria
Hassan, H.F.
Department of Community Medicine, Aminu Kano Teaching Hospital, Kano State, Nigeria
Baba, Haruna
Department of Chemistry, College of Education, Minna, Niger State, Nigeria
Madaki, A.A.
Department of Human Physiology, Abubakar Tafawa Balewa University, Bauchi, Bauchi State, Nigeria
Hassan, H.F.
Talba Housing Estate Hospital, General Hospital, Minna, Niger State, Nigeria
Ibrahim, Inusa
Department of Chemistry, Abubakar Tafawa Balewa University, Bauchi, Bauchi State, Nigeria
Hassan, A.F.
Pharmacy Department, Abubakar Tafawa Balewa University Medical Centre, Bauchi, Bauchi State, Nigeria
Muhammed, Sagir
Department of Medicine, Alkaleri General Hospital, Bauchi State, Nigeria

References

[1] Bokori, J., Fakete, S., Glautis, R. and Kadar, I. (1996). Complex Study of the Physiological Role of Cadmium (IV) and the Effects of Prolonged Dietary Expose of Broiler Chicken to Cadmium. Acta of Veterinary Humgarica, 44: 57 – 74.
[2] Demirerzen, D. and Urac, K. (2006). Comparative Study of Trace Elements in Certain Fish, Meat and Meat Products. Journal of Meat Science, 74: 255 – 260.
[3] Jeng, S. L., Lee, S. J. and Lin, S. Y. (1994). Determination of Cadmium and Lead in Raw Milk by Graphite Furnace Atomic Absorption Spectrophotometer. Journal of Science, 78: 945-949.
[4] Agrawal, R. P., Swami, S. C. and Beniwal, R. (2003). Effects of Camel Milk on Glycemic Control, Risk Factor and Diabetes Quality of Life in Type-1 Diabetes: A Randomized Prospective Controlled Study. Journal of Camel Practical Research, 10: 25-50.
[5] Shabo, Y., Barzel, R., Margoulis, M. and Yagil, R. (2005). Camel Milk for Food Allergies in Children. Immunol Allergy, 7: 796-800.
[6] Karray, N., Lopez, C., Ollivom, M. and Attia, H. (2005). Composition, Microstructure, Polymorphisme, Unereuve and Oleaginous Fat Matter Lipid. Journal of Biochemistry, 3(6): 373-375.
[7] Konuspayeva, G., Lemerie, E., Faye, B., Loisean, G. and Monted, D. (2008). Fatty Acid and Cholesterol Composition of Camel’s Milk in Kazakhstan. Diary Science Technology, 88: 327-400.
[8] Enb, A., Abou-Domia, M. A., Abd-Rabou, A. A., Abou-Arab, K. and Senaity, M. H. (2009). Chemical Composition of Heavy Metals Behaviour during Processing of Milk Products. Global Veterinary, 3: 268-275.
[9] Nassef, M., Hannigan, R., Sayed, K. and Jahawy, M. S. E. I. (2006). Determination of Some Heavy Metals in the Environment of Sadat Industry. Journal of Environmental Science, 39: 18-22.
[10] Misra, S. and Mani, D. (2009). “Soil Pollution”. S.B. Nangia APH Publishing Corporation, New Delhi, India, pp. 29-59.
[11] Onundi, H., Mamun, A.A., Khatib, M. F. and Ahmad, Y.M. (2010). Adsorption of Copper, Nickel and Lead Ions from Synthetic Semi-Conductor Waste Water by Palm Shell Activated Carbon. International Journal of Science Technology, 7: 751-758.
[12] Hassan, U. F., Ekanem, E.O., Adamu, H.M., Voncir, N. and Hassan, H.F. (2019). Determination of Some Nutrients Status of Dass Soil, Nigeria after Varied Treatments with Organic Residue of Typhadomingensis. Journal of Pure and Applied Sciences, 17: 54-60.
[13] Hassan, U. F., Gende, H.U., Yeboah, P. and Baba, H. (2011). Determination of Lead in Well and Borehole Water Samples in Bauchi, Nigeria. Journal of Science, Technology, Mathematics and Education, 7(3): 29-37.
[14] Elkins, H. B. (1980). “The Chemistry of Industrial Toxicology”. John Wiley and Sons Inc., New York, USA, pp. 274.
[15] Konuspayeva, G., Faye, B., Loisean, G., Diacono, E. and Akhmetsadykova, S. (2009). Pollution of Camel Milk by Heavy Metals in Kazakhstan. International Journal of Environmental Pollution and Toxicology, 1: 112-118.
[16] Saitmuratova, O.K., Sulaimanova, G.I. and Sadykov, A.A. (2001). Camel’s Milk and Shubat from the Region. Chemistry of Natural Compounds, 37(6): 566-568.
[17] Simsek, O., Gultekin, R., Oksuz, O. and Kurattay, S. (2000). The Effects of Environmental Pollution on Heavy Metals Content of Raw Milk. Journal of Nutrition Science and Food Technology, 12(2): 99-104.
[18] WHO (2007). Water and Milk Products for Pharmaceutical Use in Quality Assurance of Pharmaceuticals: A Compendium of Guideline and Related Materials, (2nd Edition). World Health Organisation, Geneva, 2: 170-187.
[19] Michael, J. G., Susan, A. L., Aedin, C. and Hester, H.V. (2009). “Introduction to Human Nutrition”. John Wiley and Sons Ltd., Mumbai, India, pp. 236.
[20] Strachan, S. (2010). Point of View: Nutrition of Trace Elements. Current Anaesthesia and Critical Care, 21(1): 440-448.
[21] Vital health Zone (2007). All about Mineral Iron. Available via http//www.vitalhealthzone.com
[22] Goyer, R. A. (1991). “Toxic Effects of Metals”, (4th Edition). Pengamon Press, New York, United States of America, pp. 623-680.
[23] Mendy, A., Gasana, J. and Vieira, E.R. (2012). Urinary Heavy Metals, an Associated Medical Condition in the US Adult Population. International Journal of Environmental Health Research, 22(2): 105-118.
[24] Mahmud, M.I., Muhammad, Z. and Zakari, A. (2007). Determination of Some Heavy Metals in the Milk of Grazing Cows at Selected Areas of Kaduna Metropolis. International Journal of Advanced Research in Computer Science and Software Engineering, 7(7): 341-346.
[25] Carter, M.R. and Gregorich, E.G. (2008). “Soil Sampling and Methods of Analysis”. Taylor and Francis Group, Canada, pp. 26-40.
[26] Linder, M.C. (1991). “Nutritional Biochemistry and Metabolism with Clinical Applications” (2nd Edition). Appleton and Lange, pp. 215-269.
[27] Rosen, C.J. (2008). Cited in: Hassan, U.F., Gende, H. U. and Emmanuel, O. (2009). Determination of Lead in Roadside Soil Samples of Bauchi, Nigeria. JOLORN, 10(1): 132-135.
[28] Ogabeila, E.E., Udiba, U.U., Adesina, O.B., Hammuel, C., Ade Ajayi, F.A., Yebpella, G.G., Mmereole, U.J. and Abdaullahi, M. (2011). Assessment of Metal Levels in Fresh Milk from Cows Grazed around Challawa Industrial Estate of Kano, Nigeria. Journal of Basic Science and Applied Research, 1(7): 533-538.
[29] Gimmler, H. Carandang, J. Boots, A., Reisberg, E. and Woitke, M. (2002). Heavy Metals Content and Distribution within a Woody Plant during and after Seven Years Continuous Growth on Municipal Solid Waste Bottom Slag Rich in Heavy Metals. Journal of Applied Botany, 76: 203-217.
[30] Jarup, L. (2003). Hazards of Heavy Metals Contamination. British Medical Bulletin, 68: 167-182.
[31] Roney, N. (2005). Toxicological Profile for Toxic Substances and Disease Registry. Royal Society of Chemists Journal, 2(1): 132-135.
[32] Zodape, G.U., Dhawan, V.L. and Wagh, R.R. (2012). Determination of Metals in Cow Milk Collected from Mumbai City, India. Journal of Ecology Revolution, 3: 678-682.
[33] Devlin, T.M. (2006). “Textbook of Biochemistry with Clinical Correlations” (6th Edition). John Wiley and Sons Inc. Publication, pp. 1094-1116.

Hassan, U.F., Hassan, H.F., Baba, Haruna, Madaki, A.A., Hassan, H.F., Ibrahim, Inusa, Hassan, A.F., Muhammed, Sagir "Evaluation of Toxicity Potentials of Heavy Metals in Camel Milk from Selected Farms in Yobe State, Nigeria" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.112-116 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/112-116.pdf

For Full Text Click here

Share on Social media

Soret Effect on MHD Free Convection through a Porous Inclined Channel in the Presence of Thermal Radiation

Achogo, Wisdom Hezekiah, Adikabu, Ile Nwachukwu, Awortu, Ibifaa, Eleonu, Blessing Chikaodi
July 2020
Page No.: 117-125

The theoretical examination of the effects of velocity, temperature, concentration parameter variations and magnetic fields on convective periodic flow was studied on an electrically conducting, viscous and incompressible fluid through a porous medium in an inclined plane. A set of coupled ordinary differential equations arising from the formulation of the problem were solved analytically by method of undetermined coefficient. The solution to the problem is obtained thereafter and with realistic parameter values the results were displayed in plots. The effects of parameter variations on velocity, concentration and temperature fields were discussed with the help of the plots. From the plots, the following results have been drawn; it is observed that increase in the Prandtl number decreases the temperature, increase in the Reynolds number decreases the temperature and concentration of the fluid, increase in the Schmidt number decreases the concentration making it more significant at the centre of the flow region, increase in permeability leads to increase in the velocity and increase in the magnetic field leads to decrease in the velocity, increase in Soret number increases both the concentration and velocity profiles.

Page(s): 117-125

Date of Publication: 11 August 2020

Achogo, Wisdom Hezekiah
Department of Mathematics/Statistics, Ignatius Ajuru University of education, P.M.B 5047 Rumuolumeni, Nigeria
Adikabu, Ile Nwachukwu
Department of Mathematics/Statistics, Ignatius Ajuru University of education, P.M.B 5047 Rumuolumeni, Nigeria
Awortu, Ibifaa
Department of Mathematics/Statistics, Ignatius Ajuru University of education, P.M.B 5047 Rumuolumeni, Nigeria
Eleonu, Blessing Chikaodi
Department of Mathematics/Statistics, Captain Elechi Amadi Polytechnic Rumuola, P.M.B 5936 Port Harcourt, Nigeria

References

[1]. Achogo W. H. and Adikabu I. N.(2020). Mutual influences of heat and mass transfer on mhd flow through a channel with periodic wall concentration and temperature. International journal of research and innovation in applied science,V(VI):2454-6194.
[2]. Achogo W. H., Okereke I. C. Ofomata A. I. and Amadi O. F.(2020) .Magnetohydrodynamic convective periodic flow through a porous medium in an inclined channel with thermal radiation and chemical reaction. International Journal of Innovative Science and Research Technology.5(1):1129-1139.
[3]. Achogo W. H., Okereke I. C. Ofomata A. I. and Eleonu B. C.(2020) .Effect of heat source on Magnetohydrodynamic free convection through a channel with a wall having periodic temperature. International Journal of Innovative Science and Research Technology.5(4):1035-1040.
[4]. Ahmed, N. and Sarmah, H. K. (2009). Thermal radiation effect on a transient MHD flow with mass transfer past an impulsively fixed infinite vertical plate.Int.J. of Appl. Math. and Mech., 5(5) 87-98.
[5]. Alabraba, M. A.;Bestman, A. R. and Ogulu, A. (1992). Free convection interaction with thermal radiatin in a hydromangetic boundary layer taking into account the binary chemical reaction and the less attended Soret and Dufour effects.Astrophysics Space Science,195: 431-445.
[6]. Alagoa, K. D.; Tay, G. and Abbey, T. M. (1998). Radiative and free convective effects of a MHD flow through a porous medium between infinite parallel plates with time – dependent suction.” Astrophysics and Space Science, 260:455-468.
[7]. Anghel M., Hossain M. A. andZeb S. (2001). Combined heat and mass transfer by free convection past an inclined flat plate.Int. J. Appl. Mech. and Engg.,2: 473-497.
[8]. Attia H. A. and Kotb N. A. (1996). MHD flow between two with heat transfer parallel plates.”,ActaMechanica, 117: 215-220.
[9]. Bestman, A. R., “Free convection heat transfer to steady radiating non – Newtonian MHD flow past a vertical porous plate.” Int. J. Numerical Methods in engg., 21(2005) 899 – 908.
[10]. Bhuvaneswari M. and Sivasankaran S., Kim Y. J. (2010). Exact analysis of radiation convective flow heat and mass transfer over an inclined plate in a porous medium.”, World Applied Journal, 10:774-778
[11]. Chen C.H, Heat and mass transfer in MHD flow with variable wall temperature and concentration, ActaMechanica, 172 :219-235.
[12]. Cess, R. D. (1966). The interaction of thermal radiation with free convection heat transfer..Int. J. Heat and Mass Trans.,9:1269-1277.
[13]. Eckert, E. R. G. and Drake R. M. (1958). Heat and Mass Transfer.”,McGrawHill Book Co., New York.
[14]. Ganesan P and Palani G., “Natural convection effects on impulsively started inclined plate with heat and mass transfer.Heat and Mass Transfer, 39 (2003) 277-283.
[15]. Ganesan P. andPalani G. (2004). Finite difference analysis of unsteady natural convection MHD flow past an inclined plate with variable surface heat and mass flux.Int. J. Heat Mass Transfer, 47:4449-4457.
[16]. Gersten K. and J.F. Gross J. F. (1974). Flow and heat transfer along a plane wall with periodic suction.Z. Angew. Math. Phys.,25: 399-408.
[17]. Ghosh, S. K.; Rawat, S.; Beg, O. A. and Beg, T. A. (2010). Thermal radiation effects on unsteady hydromagnetic gas flow along an inclined plane with indirect natural convection.Int. J. of Appl. Math and Mech., 6: 41 – 57.
[18]. Hari R. K. and Harshad R. P.(2016). Soret and heat generation effects on mhd casson fluid flow past an oscillating vertical plate embedded through porous medium, Alexandra Engineering Journal,55:2125-2137.
[19]. Hossain M. A., I. Pop I. and Ahmad M. (1996). MHD free convection flow from an isothermal plate.”,J. Theo. and Appl. Mech., 1: 194-207.
[20]. Israel-Cookey, C.; Amos, E. and Nwaigwe, C. (2010). MHD oscillatory Couette flow of a radiating viscous fluid in a porous medium with periodic wall temperature. Am. J. Sci. Ind. Res.,1(2) 326 – 331.
[21]. Jain N. C. and Bansal J. L., “Couette flow with transpiration cooling when the viscosity of the fluid depends on temperature.”Proc. Ind. Acad. Sci.,77(1973), 184-200.
[22]. Kumar H. (2017). Heat and mass transfer on isothermal inclined porous plate in the presence of chemical reaction.Int. J. of Pure and App. Math., 113(5) 523-539.
[23]. Mohammed R. A.(2009). Double –Diffusioin convection-radiation interaction on Unsteady MHD flow over a vertical moving porous plate with heat generation and soret effects. Applied Mathematical Sciences 3(13),629-651.
[24]. S.A.M. Said, M.A. Habib, H.M. Badr, S. Anwar S. (2005). Turbulent natural convection between inclined isothermal plates, Computers & Fluid, 34(9) 1025-1039.
[25]. Sharma P. R.;Kalpna Sharma and Tripti Mehta (2014).Radiative and free convective effects on MHD flow through a porous medium with periodic wall temperature and heat generation or absorption. Int. J. of Math. Arch.,5(9) 119 – 128.
[26]. Singh K. D. and Mathew A. (2008). Injection/suction effects on an oscillatory hydromagnetic flow in a rotating horizontal porous channel.Indian J. Phys.,82(4), 435-445.
[27]. Sparrow E. M. and Husar R. B. (1969). Longitudinal vortices in natural convection flow on inclined plates.J. Fluid. Mech., 37(2) 251-255.
[28]. Swapna Y., M. C. Raju and Ram Prakash Sharma (2017). Mass transfer effects on MHD mixed convective periodic flow through porous medium in an inclined channel with transpiration cooling and thermal radiation. Jnananbha47(1), 195 – 206.

Achogo, Wisdom Hezekiah, Adikabu, Ile Nwachukwu, Awortu, Ibifaa, Eleonu, Blessing Chikaodi "Soret Effect on MHD Free Convection through a Porous Inclined Channel in the Presence of Thermal Radiation" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.117-125 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/117-125.pdf

For Full Text Click here

Share on Social media

Growth Response of Grower Rabbits (Oryctolagus Cunniculus) Fed Diets Containing Graded Levels of Anaerobically Fermented Cassava/Palm Kernel Meals

Uzohuo U., Akinlosoye J.J.
July 2020
Page No.: 126-129

The study was conducted to evaluate the growth response of Rabbits (Oryctolagus cuniculus) fed diets containing varying levels of fermented cassava/ palm kernel meal. 80 grower Rabbits of a New Zealand white x dutch breed with average weight of 600g were assigned to five dietary treatment in a completely randomised design. The rabbits were of 5 groups of 16 rabbits; each replicate four times i.e. 4 rabbits per replicate and reared in indoor hutch of 1m x 1m x 0.6m for 56 days. Soyabean meal as a major protein source was gradually replaced in the diet with fermented cassava/palm kernel meal at 0%, 10%, 20%, 30%, and 40% respectively. In the control diet, there was no cassava/ palm kernel meal. Rabbit were fed ad-libtum for 56 days. The growth response and nutrient utilization were evaluated base on feed conversion ration (FCR), protein efficiency ration (PER), and specific growth rate (SGR) as parameters. The highest feed conversion ratio of 6.39 was obtained from test diet 5 (40%) while the least value of 4.1 was obtained from the control group, indicating that feed was better utilized by the rabbit fed the control diet (p<0.05). The least value for specific growth rate (0.54) was obtained from the Diets 5 (40%), while the value of 1.04 was recorded from control group (p<0.05). This research shows that fermented cassava/palm kernel meal can be included up to 20 % in ration of grower rabbit (Oryctolagus cuniculus), without negative effect on growth performance.

Page(s): 126-129

Date of Publication: 11 August 2020

Uzohuo U.
Department of Agricultural Technology, Federal Polytechnic ile-oluji, Ondo State, Nigeria
Akinlosoye J.J.
Department of Agricultural Technology, Federal Polytechnic ile-oluji, Ondo State, Nigeria

References

[1] Duncan D.B 1955. multiple range and multiple test, Biometrics 11 : 1-42 Steel RG and Torries J.H 1980. Principles and procedure of statistics : A biometrical Approach 2nd Edition.
[2] Bi Y. and Peter W.S 1996 .The effect of crude fibre level in the diet on the intestinal morphology of growing rabbits. International journals of laboratory animals.
[3] Ezieshi, E. V. and Olomu, J.M. (2007). Nutritional evaluation of palm kernel meal types: 1. Proximate composition and metabolizable energy values. African journal of Biotechnology, 6(21): 2484-2486.
[4] Ofojekwu P.C, Onuoha P.C and Ayuba V.O. 2003. substitution of cotton seed cake with palm kernel meal in diets of Nile tilapia. (Oreochromis niloticus. L.). J. Aquat. Sci., 18:59-63.
[5] Aduku, A.O. 1993. Tropical feed stuffs analysis table. Department of Animal science, Ahmad Bello University (ABU) Samaru, Zaria, Nigeria.
[6] Uchegbu, M.C., Udedibie, A.B.I., Anyanwu, G.A., Okoli, IC., Omode, A.A., Nwaodu, C.H. and Irechukwu, N.M. (2009). Comparative evaluation of three commercial feeds on the performance of broilers. Report and Opinion, 1(4):84-89.
[7] Obi, I.U. 1990. Statistical methods of detecting difference between treatment means. 2nd edition. Snaap Press, Enugu, Nigeria.
[8] Eyo, A.A. 2001. Chemical composition and amino-acid content of the commonly available feed stuffs used in fish feed in Nigeria. In :Eyo, A.A (Ed), fish nutrition and fish feed technology :14-25.
[9] AOAC, 1995 official Methods of Analysis . 16th Edition. AOAC, Arlington, VA, USA.
[10] Agbabiaka C.N. and Osigwe D.I. (2014) Growth response of Nile tilapia (Oreochromis niloticus L.) fed diets containing graded levels of anaerobically fermented palm kernel/cassava meals. Journal of Genetic and Environmental resources Conservation, 2014, 2(3):302-306. www.igerc.com.
[11] Adjare, S.O., Try the rabbit (1993). A practical guide. CTA Netherlands 1-5pp.Schlere J.B and Cortiaensen C.J. (2008) publisher : Digigafi, Wageningen the Netherlands. Backyard rabbit keeping in the tropics.
[12] Okata U.E., Ohanaka A.U.C., Uzohuo U., Ogundu E.C., Uchegbu M.C. and Okoli I.C. (2018). Dry matter and Crude protein value of selected feedstuffs used in the Nigeria livestock industry. In ; book of Abstract, 43rd Annual conference of Nigeria society for Animal production on Exploring science and technology Innovations for sustainable livestock development 18th-22nd March, 2018. Federal University of Technology Owerri, Imo state, Nigeria pp;236.
[13] Agbabiaka L.A.,Ayo-Enwerem M.C. (2014) Principles and concepts of Animal Agriculture in the tropics 606. Prod. Nigeria 66-70pp.
[14] Abd EL-baki, S.M., Nowar. M.S., Bassuny, S.M., Hassona, E.M. and Soliman, E.S. (1993). Cassava as new animal feed in Egypt 3-pelleted complete Cassava feed for growing rabbits. World Rabbit Science, 1 (4) : 139-145.
[15] Modupe et al 2006 : Effects of Graded levels of Palm-kernel cake on performance of Grower rabbits. Pakistan Journal of Nutrition 5 (1) : 71-74.
[16] Zein, R. E, EL-Bagoury, A.A and kassab, H.E. (2005). Chemical and nutritional studies On mango seed kernel. J. Agric. Sci. Mansoura Univ., 30 (6):3285-3299.
[17] Snedecor GW and Cochran W.G. (1980). Statistical Methods. 6th edition. Iowa State University press, Ames, Iowa, USA.
[18] Chin, F.Y. (2002). Utilization of palm kernel cake (PKC) as feed in Malaysia Asia livestock Vol. XXVI, No. 4. FAO Regional Office, Bangkok Thailand,pp:19-23.
[19] Olorunsanya B., Ayoola M.A., Fayeye T.R., Olagunju T.A., Olorunsanya E.O. (2007). Effect of replacing maize with sun-dried cassava waste meal on growth performance and carcass characteristics of meat type rabbit. Livestock research for Rural development 19 (4) 2007.

Uzohuo U., Akinlosoye J.J. "Growth Response of Grower Rabbits (Oryctolagus Cunniculus) Fed Diets Containing Graded Levels of Anaerobically Fermented Cassava/Palm Kernel Meals" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.126-129 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/126-129.pdf

For Full Text Click here

Share on Social media

Statistical Analysis of Time Series Model: Additive Case

Kelechukwu C.N Dozie, C.C Ibebuogu
July 2020
Page No.: 130-136

The purpose of this paper is to examine the condition(s) under which the linear trend cycle component with emphasis on the additive time series model is the most appropriate model in time series analysis. This paper is to identify the series that admits additive model using the Buys-Ballot procedure. Also, to estimate missing observations by the method of mean imputation. Table 1 show that, the seasonal variance of Buys-Ballot table for additive model, is a function of trend parameters only but do not contain seasonal indices

Page(s): 130-136

Date of Publication: 15 August 2020

Kelechukwu C.N Dozie
Condensed Matter Research Group,
Department of Statistics Imo State University Owerri, Imo State, Nigeria
C.C Ibebuogu
Department of Computer Science Imo State University Owerri, Imo State, Nigeria

References

[1] Kendal, M. G. & Ord, J. K. (1990). Time Series (3rded.). Charles Griffin, London.
[2] Chatfield, C. (2004). The analysis of time Series: An introduction. Chapman and Hall,/CRC Press, Boca Raton.
[3] Davey A.M & Flores (1993). Identification of seasonality in time series: a note, maths. Comput. Modelling 18(6), 73-81
[4] Puerto, J. & Rivera, M. P. (2001). Descriptive analysis of time series applied to housing prices in Spain, Management Mathematics for European Schools 94342 – CP – 2001 – DE – COMENIUS – C21
[5] Linde, P.(2005). Seasonal Adjustment, Statistics Denmark. www.dst.dk/median/konrover/13-forecasting-org/seasonal/001pdf
[6] Wei, W. W. S (1989). Time series analysis: Univariate and multivariate methods, Addison-Wesley publishing Company Inc, Redwood City.
[7] Iwueze, I. S. & Nwogu E.C. (2004). Buys-Ballot estimates for time series decomposition, Global Journal of Mathematics, 3(2), 83-98.
[8] Iwueze, I. S. & Nwogu, E.C. (2005). Buys-Ballot estimates for exponential and s-shaped curves, for time series, Journal of the Nigerian Association of Mathematical Physics, 9, 357-366.
[9] Iwueze, I. S. & Nwogu, E.C. (2014). Framework for choice of models and detection of seasonal effect in time series. Far East Journal of Theoretical Statistics 48(1), 45– 66
[10] Dozie, K. C. N (2020). Buys-Ballot Estimates for Mixed Model in Descriptive Time Series. International Journal of Theoretical and Mathematical Physics 10(1), 22-27
[11] Dozie, K.C.N, Nwogu, E.C, Nwanya, J.C (2020). Buys-Ballot technique for analysis of time Series model. International Journal of Scientific Research and Innovative Technology 7(1), 63-78
[12] Dozie, K.C.N, Ijomah M.A (2020). A comparative study on additive and mixed models in descriptive time series. American Journal of Mathematical and Computer Modelling 5(1), 12-17

Kelechukwu C.N Dozie, C.C Ibebuogu "Statistical Analysis of Time Series Model: Additive Case" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.130-136 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/130-136.pdf

For Full Text Click here

Share on Social media

Solution of Convolution Type Volterra Integro-Differential Equation of First Kind Using Kamal Transformation

Sudhanshu Aggarwal, Swarg Deep Sharma, Aakansha Vyas
July 2020
Page No.: 137-143

Volterra integro-differential equations appear in many branches of engineering, physics, biology, astronomy, radiology and having many interesting applications such as process of glass forming, diffusion process, heat and mass transfer, growth of cells and describing the motion of satellite. In this paper, authors determine the solution of convolution type Volterra integro-differential equation of first kind using Kamal transformation. Four numerical problems have been considered and solved using Kamal transformation for explaining the applicability of present method. Results of numerical problems show that Kamal transformation is very effective for handling the problem of determining the solution of convolution type Volterra integro-differential equation of first kind.

Page(s): 137-143

Date of Publication: 15 August 2020

Sudhanshu Aggarwal
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India
Swarg Deep Sharma
Assistant Professor, Department of Mathematics, Nand Lal Singh College Jaitpur Daudpur Constituent of Jai Prakash University Chhapra-841205, Bihar, India
Aakansha Vyas
Assistant Professor, Noida Institute of Engineering & Technology, Greater Noida-201306, U.P., India

References

[1]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Mahgoub transform for solving linear Volterra integral equations. Asian Resonance, 7(2), 46-48.
[2]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Mahgoub transform for solving linear Volterra integral equations of first kind. Global Journal of Engineering Science and Researches, 5(9), 154-161.
[3]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). A new application of Aboodh transform for solving linear Volterra integral equations. Asian Resonance, 7(3), 156-158.
[4]. Aggarwal, S., Gupta, A. R., & Sharma, S. D. (2019). A new application of Shehu transform for handling Volterra integral equations of first kind. International Journal of Research in Advent Technology, 7(4), 439-445.
[5]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[6]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3745-3753.
[7]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integral equations of second kind using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3098-3102.
[8]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Kamal transform for solving linear Volterra integral equations. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(4), 138-140.
[9]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integro-differential equations of second kind using Mahgoub transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(5), 173-176.
[10]. Aggarwal, S., & Gupta, A. R. (2019). Solution of linear Volterra integro-differential equations of second kind using Kamal transform. Journal of Emerging Technologies and Innovative Research, 6(1), 741-747.
[11]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integro-differential equations of second kind. International Journal of Research in Advent Technology, 6(6), 1186-1190.
[12]. Chauhan, R., & Aggarwal, S. (2018). Solution of linear partial integro-differential equations using Mahgoub transform. Periodic Research, 7(1), 28-31.
[13]. Gupta, A. R., Aggarwal, S., & Agrawal, D. (2018). Solution of linear partial integro-differential equations using Kamal transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(7), 88-91.
[14]. Singh, G. P., & Aggarwal, S. (2019). Sawi transform for population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(8), 157-162.
[15]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of population growth and decay problems by using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3277-3282.
[16]. Aggarwal, S., Gupta, A. R., Asthana, N., & Singh, D. P. (2018). Application of Kamal transform for solving population growth and decay problems. Global Journal of Engineering Science and Researches, 5(9), 254-260.
[17]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). Application of Shehu transform for handling growth and decay problems. Global Journal of Engineering Science and Researches, 6(4), 190-198.
[18]. Aggarwal, S., Singh, D. P., Asthana, N., & Gupta, A. R. (2018). Application of Elzaki transform for solving population growth and decay problems. Journal of Emerging Technologies and Innovative Research, 5(9), 281-284.
[19]. Aggarwal, S., Gupta, A. R., Singh, D. P., Asthana, N., & Kumar, N. (2018). Application of Laplace transform for solving population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(9), 141-145.
[20]. Aggarwal, S., Pandey, M., Asthana, N., Singh, D. P., & Kumar, A. (2018). Application of Mahgoub transform for solving population growth and decay problems. Journal of Computer and Mathematical Sciences, 9(10), 1490-1496.
[21]. Aggarwal, S., Sharma, N., & Chauhan, R. (2020). Duality relations of Kamal transform with Laplace, Laplace–Carson, Aboodh, Sumudu, Elzaki, Mohand and Sawi transforms. SN Applied Sciences, 2(1), 135.
[22]. Aggarwal, S., & Bhatnagar, K. (2019). Dualities between Laplace transform and some useful integral transforms. International Journal of Engineering and Advanced Technology, 9(1), 936-941.
[23]. Chauhan, R., Kumar, N., & Aggarwal, S. (2019). Dualities between Laplace-Carson transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 1654-1659.
[24]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between Mohand transform and some useful integral transforms. International Journal of Recent Technology and Engineering, 8(3), 843-847.
[25]. Aggarwal, S., & Gupta, A. R. (2019). Dualities between some useful integral transforms and Sawi transform. International Journal of Recent Technology and Engineering, 8(3), 5978-5982.
[26]. Aggarwal, S., Bhatnagar, K., & Dua, A. (2019). Dualities between Elzaki transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 4312-4318.
[27]. Aggarwal, S., Sharma, N., Chaudhary, R., & Gupta, A. R. (2019). A comparative study of Mohand and Kamal transforms. Global Journal of Engineering Science and Researches, 6(2), 113-123.
[28]. Aggarwal, S., Mishra, R., & Chaudhary, A. (2019). A comparative study of Mohand and Elzaki transforms. Global Journal of Engineering Science and Researches, 6(2), 203-213.
[29]. Aggarwal, S., & Sharma, S. D. (2019). A comparative study of Mohand and Sumudu transforms. Journal of Emerging Technologies and Innovative Research, 6(3), 145-153.
[30]. Aggarwal, S., & Chauhan, R. (2019). A comparative study of Mohand and Aboodh transforms. International Journal of Research in Advent Technology, 7(1), 520-529.
[31]. Aggarwal, S., & Chaudhary, R. (2019). A comparative study of Mohand and Laplace transforms. Journal of Emerging Technologies and Innovative Research, 6(2), 230-240.
[32]. Aggarwal, S., Gupta, A. R., & Kumar, A. (2019). Elzaki transform of error function. Global Journal of Engineering Science and Researches, 6(5), 412-422.
[33]. Aggarwal, S., & Singh, G. P. (2019). Aboodh transform of error function. Universal Review, 10(6), 137-150.
[34]. Aggarwal, S., & GP, S. (2019). Shehu Transform of Error Function (Probability Integral). Int J Res Advent Technol, 7, 54-60.
[35]. Aggarwal, S., & Sharma, S. D. (2019). Sumudu transform of error function. Journal of Applied Science and Computations, 6(6), 1222-1231.
[36]. Aggarwal, S., Gupta, A. R., & Kumar, D. (2019). Mohand transform of error function. International Journal of Research in Advent Technology, 7(5), 224-231.
[37]. Aggarwal, S., & Singh, G. P. (2019). Kamal transform of error function. Journal of Applied Science and Computations, 6(5), 2223-2235.
[38]. Aggarwal, S., Gupta, A. R., Sharma, S. D., Chauhan, R., & Sharma, N. (2019). Mahgoub transform (Laplace-Carson transform) of error function. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(4), 92-98.
[39]. Aggarwal, S., Singh, A., Kumar, A., & Kumar, N. (2019). Application of Laplace transform for solving improper integrals whose integrand consisting error function. Journal of Advanced Research in Applied Mathematics and Statistics, 4(2), 1-7.
[40]. Aggarwal, S., Sharma, N., Chauhan, R., Gupta, A. R., & Khandelwal, A. (2018). A new application of Mahgoub transform for solving linear ordinary differential equations with variable coefficients. Journal of Computer and Mathematical Sciences, 9(6), 520-525.
[41]. Aggarwal, S., & Sharma, S. D. (2019). Application of Kamal transform for solving Abel’s integral equation. Global Journal of Engineering Science and Researches, 6(3), 82-90.
[42]. Aggarwal, S., & Gupta, A. R. (2019). Sumudu transform for the solution of Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(4), 423-431.
[43]. Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). A new application of Mohand transform for handling Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(3), 600-608.
[44]. Aggarwal, S., & Sharma, S. D. (2019). Solution of Abel’s integral equation by Aboodh transform method. Journal of Emerging Technologies and Innovative Research, 6(4), 317-325.
[45]. Aggarwal, S., & Gupta, A. R. (2019). Shehu Transform for Solving Abel’s Integral Equation. Journal of Emerging Technologies and Innovative Research, 6(5), 101-110.
[46]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Mohand transform of Bessel’s functions. International Journal of Research in Advent Technology, 6(11), 3034-3038.
[47]. Aggarwal, S., Gupta, A. R., & Agrawal, D. (2018). Aboodh transform of Bessel’s functions. Journal of Advanced Research in Applied Mathematics and Statistics, 3(3), 1-5.
[48]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Mahgoub transform of Bessel’s functions. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(8), 32-36.
[49]. Aggarwal, S. (2018). Elzaki transform of Bessel’s functions. Global Journal of Engineering Science and Researches, 5(8), 45-51.
[50]. Chaudhary, R., Sharma, S.D., Kumar, N., & Aggarwal, S. (2019). Connections between Aboodh transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(1), 1465-1470.
[51]. Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[52]. Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Kamal transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(8), 2081-2088.
[53]. Aggarwal, S., Asthana, N. & Singh, D.P. (2018). Solution of population growth and decay problems by using Aboodh transform method. International Journal of Research in Advent Technology, 6(10), 2706-2710.
[54]. Aggarwal, S., & Bhatnagar, K. (2019). Sadik transform for handling population growth and decay problems. Journal of Applied Science and Computations, 6(6), 1212-1221.
[55]. Aggarwal, S., & Sharma, S.D. (2019). Sadik transform of error function (probability integral). Global Journal of Engineering Science and Researches, 6(6), 125-135.
[56]. Aggarwal, S., Gupta, A.R., & Sharma, S.D. (2019). Application of Sadik transform for handling linear Volterra integro-differential equations of second kind. Universal Review, 10(7), 177-187.
[57]. Aggarwal, S., & Bhatnagar, K. (2019). Solution of Abel’s integral equation using Sadik transform. Asian Resonance, 8(2), (Part-1), 57-63.
[58]. Aggarwal, S. (2019). A comparative study of Mohand and Mahgoub transforms. Journal of Advanced Research in Applied Mathematics and Statistics, 4(1), 1-7.
[59]. Aggarwal, S. (2018). Kamal transform of Bessel’s functions. International Journal of Research and Innovation in Applied Science, 3(7), 1-4.
[60]. Chauhan, R., & Aggarwal, S. (2019). Laplace transform for convolution type linear Volterra integral equation of second kind. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 1-7.
[61]. Sharma, N., & Aggarwal, S. (2019). Laplace transform for the solution of Abel’s integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 8-15.
[62]. Aggarwal, S., & Sharma, N. (2019). Laplace transform for the solution of first kind linear Volterra integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 16-23.
[63]. Mishra, R., Aggarwal, S., Chaudhary, L., & Kumar, A. (2020). Relationship between Sumudu and some efficient integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(3), 153-159.
[64]. Kamal, A., & Sedeeg, H. (2016). The new integral transform “Kamal Transform”. Advances in Theoretical and Applied Mathematics, 11(4), 451-458.

Sudhanshu Aggarwal, Swarg Deep Sharma, Aakansha Vyas "Solution of Convolution Type Volterra Integro-Differential Equation of First Kind Using Kamal Transformation" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.137-143 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/137-143.pdf

For Full Text Click here

Share on Social media

Primitive of Faltung Type Volterra Integro-Differential Equation of First Kind Using Elzaki Transform

Sudhanshu Aggarwal, Aakansha Vyas, Swarg Deep Sharma
July 2020
Page No.: 144-150

Volterra integro-differential equations appear in different branches of engineering, physics, astronomy, biology, radiology and having many useful applications such as process of glass forming, diffusion process, heat and mass transfer, growth of cells and describing the motion of satellite. In this paper, authors determine the primitive of faltung type Volterra integro-differential equation of first kind using Elzaki transform. Four numerical problems have been considered and solved using Elzaki transform for explaining the applicability of present method. Results of numerical problems show that Elzaki transform is very effective integral transform for determining the primitive of faltung type Volterra integro-differential equation of first kind.

Page(s): 144-150

Date of Publication: 15 August 2020

Sudhanshu Aggarwal
Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur-273402, U.P., India
Aakansha Vyas
Assistant Professor, Noida Institute of Engineering & Technology, Greater Noida-201306, U.P., India
Swarg Deep Sharma
Assistant Professor, Department of Mathematics, Nand Lal Singh College Jaitpur Daudpur Constituent of Jai Prakash University Chhapra-841205, Bihar, India

References

[1] Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Mahgoub transform for solving linear Volterra integral equations. Asian Resonance, 7(2), 46-48.
[2] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Mahgoub transform for solving linear Volterra integral equations of first kind. Global Journal of Engineering Science and Researches, 5(9), 154-161.
[3] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). A new application of Aboodh transform for solving linear Volterra integral equations. Asian Resonance, 7(3), 156-158.
[4] Aggarwal, S., Gupta, A. R., & Sharma, S. D. (2019). A new application of Shehu transform for handling Volterra integral equations of first kind. International Journal of Research in Advent Technology, 7(4), 439-445.
[5] Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[6] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3745-3753.
[7] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integral equations of second kind using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3098-3102.
[8] Aggarwal, S., Chauhan, R., & Sharma, N. (2018). A new application of Kamal transform for solving linear Volterra integral equations. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(4), 138-140.
[9] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of linear Volterra integro-differential equations of second kind using Mahgoub transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(5), 173-176.
[10] Aggarwal, S., & Gupta, A. R. (2019). Solution of linear Volterra integro-differential equations of second kind using Kamal transform. Journal of Emerging Technologies and Innovative Research, 6(1), 741-747.
[11] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Aboodh transform for solving linear Volterra integro-differential equations of second kind. International Journal of Research in Advent Technology, 6(6), 1186-1190.
[12] Chauhan, R., & Aggarwal, S. (2018). Solution of linear partial integro-differential equations using Mahgoub transform. Periodic Research, 7(1), 28-31.
[13] Gupta, A. R., Aggarwal, S., & Agrawal, D. (2018). Solution of linear partial integro-differential equations using Kamal transform. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(7), 88-91.
[14] Singh, G. P., & Aggarwal, S. (2019). Sawi transform for population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(8), 157-162.
[15] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Solution of population growth and decay problems by using Mohand transform. International Journal of Research in Advent Technology, 6(11), 3277-3282.
[16] Aggarwal, S., Gupta, A. R., Asthana, N., & Singh, D. P. (2018). Application of Kamal transform for solving population growth and decay problems. Global Journal of Engineering Science and Researches, 5(9), 254-260.
[17] Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). Application of Shehu transform for handling growth and decay problems. Global Journal of Engineering Science and Researches, 6(4), 190-198.
[18] Aggarwal, S., Singh, D. P., Asthana, N., & Gupta, A. R. (2018). Application of Elzaki transform for solving population growth and decay problems. Journal of Emerging Technologies and Innovative Research, 5(9), 281-284.
[19] Aggarwal, S., Gupta, A. R., Singh, D. P., Asthana, N., & Kumar, N. (2018). Application of Laplace transform for solving population growth and decay problems. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(9), 141-145.
[20] Aggarwal, S., Pandey, M., Asthana, N., Singh, D. P., & Kumar, A. (2018). Application of Mahgoub transform for solving population growth and decay problems. Journal of Computer and Mathematical Sciences, 9(10), 1490-1496.
[21] Aggarwal, S., Sharma, N., & Chauhan, R. (2020). Duality relations of Kamal transform with Laplace, Laplace–Carson, Aboodh, Sumudu, Elzaki, Mohand and Sawi transforms. SN Applied Sciences, 2(1), 135.
[22] Aggarwal, S., & Bhatnagar, K. (2019). Dualities between Laplace transform and some useful integral transforms. International Journal of Engineering and Advanced Technology, 9(1), 936-941.
[23] Chauhan, R., Kumar, N., & Aggarwal, S. (2019). Dualities between Laplace-Carson transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 1654-1659.
[24] Aggarwal, S., & Gupta, A. R. (2019). Dualities between Mohand transform and some useful integral transforms. International Journal of Recent Technology and Engineering, 8(3), 843-847.
[25] Aggarwal, S., & Gupta, A. R. (2019). Dualities between some useful integral transforms and Sawi transform. International Journal of Recent Technology and Engineering, 8(3), 5978-5982.
[26] Aggarwal, S., Bhatnagar, K., & Dua, A. (2019). Dualities between Elzaki transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 8(12), 4312-4318.
[27] Aggarwal, S., Sharma, N., Chaudhary, R., & Gupta, A. R. (2019). A comparative study of Mohand and Kamal transforms. Global Journal of Engineering Science and Researches, 6(2), 113-123.
[28] Aggarwal, S., Mishra, R., & Chaudhary, A. (2019). A comparative study of Mohand and Elzaki transforms. Global Journal of Engineering Science and Researches, 6(2), 203-213.
[29] Aggarwal, S., & Sharma, S. D. (2019). A comparative study of Mohand and Sumudu transforms. Journal of Emerging Technologies and Innovative Research, 6(3), 145-153.
[30] Aggarwal, S., & Chauhan, R. (2019). A comparative study of Mohand and Aboodh transforms. International Journal of Research in Advent Technology, 7(1), 520-529.
[31] Aggarwal, S., & Chaudhary, R. (2019). A comparative study of Mohand and Laplace transforms. Journal of Emerging Technologies and Innovative Research, 6(2), 230-240.
[32] Aggarwal, S., Gupta, A. R., & Kumar, A. (2019). Elzaki transform of error function. Global Journal of Engineering Science and Researches, 6(5), 412-422.
[33] Aggarwal, S., & Singh, G. P. (2019). Aboodh transform of error function. Universal Review, 10(6), 137-150.
[34] Aggarwal, S., & GP, S. (2019). Shehu Transform of Error Function (Probability Integral). Int J Res Advent Technol, 7, 54-60.
[35] Aggarwal, S., & Sharma, S. D. (2019). Sumudu transform of error function. Journal of Applied Science and Computations, 6(6), 1222-1231.
[36] Aggarwal, S., Gupta, A. R., & Kumar, D. (2019). Mohand transform of error function. International Journal of Research in Advent Technology, 7(5), 224-231.
[37] Aggarwal, S., & Singh, G. P. (2019). Kamal transform of error function. Journal of Applied Science and Computations, 6(5), 2223-2235.
[38] Aggarwal, S., Gupta, A. R., Sharma, S. D., Chauhan, R., & Sharma, N. (2019). Mahgoub transform (Laplace-Carson transform) of error function. International Journal of Latest Technology in Engineering, Management & Applied Science, 8(4), 92-98.
[39] Aggarwal, S., Singh, A., Kumar, A., & Kumar, N. (2019). Application of Laplace transform for solving improper integrals whose integrand consisting error function. Journal of Advanced Research in Applied Mathematics and Statistics, 4(2), 1-7.
[40] Aggarwal, S., Sharma, N., Chauhan, R., Gupta, A. R., & Khandelwal, A. (2018). A new application of Mahgoub transform for solving linear ordinary differential equations with variable coefficients. Journal of Computer and Mathematical Sciences, 9(6), 520-525.
[41] Aggarwal, S., & Sharma, S. D. (2019). Application of Kamal transform for solving Abel’s integral equation. Global Journal of Engineering Science and Researches, 6(3), 82-90.
[42] Aggarwal, S., & Gupta, A. R. (2019). Sumudu transform for the solution of Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(4), 423-431.
[43] Aggarwal, S., Sharma, S. D., & Gupta, A. R. (2019). A new application of Mohand transform for handling Abel’s integral equation. Journal of Emerging Technologies and Innovative Research, 6(3), 600-608.
[44] Aggarwal, S., & Sharma, S. D. (2019). Solution of Abel’s integral equation by Aboodh transform method. Journal of Emerging Technologies and Innovative Research, 6(4), 317-325.
[45] Aggarwal, S., & Gupta, A. R. (2019). Shehu Transform for Solving Abel’s Integral Equation. Journal of Emerging Technologies and Innovative Research, 6(5), 101-110.
[46] Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Mohand transform of Bessel’s functions. International Journal of Research in Advent Technology, 6(11), 3034-3038.
[47] Aggarwal, S., Gupta, A. R., & Agrawal, D. (2018). Aboodh transform of Bessel’s functions. Journal of Advanced Research in Applied Mathematics and Statistics, 3(3), 1-5.
[48] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Mahgoub transform of Bessel’s functions. International Journal of Latest Technology in Engineering, Management & Applied Science, 7(8), 32-36.
[49] Aggarwal, S. (2018). Elzaki transform of Bessel’s functions. Global Journal of Engineering Science and Researches, 5(8), 45-51.
[50] Chaudhary, R., Sharma, S.D., Kumar, N., & Aggarwal, S. (2019). Connections between Aboodh transform and some useful integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(1), 1465-1470.
[51] Aggarwal, S., Chauhan, R., & Sharma, N. (2018). Application of Elzaki transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(12), 3687-3692.
[52] Aggarwal, S., Sharma, N., & Chauhan, R. (2018). Application of Kamal transform for solving linear Volterra integral equations of first kind. International Journal of Research in Advent Technology, 6(8), 2081-2088.
[53] Aggarwal, S., Asthana, N. & Singh, D.P. (2018). Solution of population growth and decay problems by using Aboodh transform method. International Journal of Research in Advent Technology, 6(10), 2706-2710.
[54] Aggarwal, S., & Bhatnagar, K. (2019). Sadik transform for handling population growth and decay problems. Journal of Applied Science and Computations, 6(6), 1212-1221.
[55] Aggarwal, S., & Sharma, S.D. (2019). Sadik transform of error function (probability integral). Global Journal of Engineering Science and Researches, 6(6), 125-135.
[56] Aggarwal, S., Gupta, A.R., & Sharma, S.D. (2019). Application of Sadik transform for handling linear Volterra integro-differential equations of second kind. Universal Review, 10(7), 177-187.
[57] Aggarwal, S., & Bhatnagar, K. (2019). Solution of Abel’s integral equation using Sadik transform. Asian Resonance, 8(2), (Part-1), 57-63.
[58] Aggarwal, S. (2019). A comparative study of Mohand and Mahgoub transforms. Journal of Advanced Research in Applied Mathematics and Statistics, 4(1), 1-7.
[59] Aggarwal, S. (2018). Kamal transform of Bessel’s functions. International Journal of Research and Innovation in Applied Science, 3(7), 1-4.
[60] Chauhan, R., & Aggarwal, S. (2019). Laplace transform for convolution type linear Volterra integral equation of second kind. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 1-7.
[61] Sharma, N., & Aggarwal, S. (2019). Laplace transform for the solution of Abel’s integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 8-15.
[62] Aggarwal, S., & Sharma, N. (2019). Laplace transform for the solution of first kind linear Volterra integral equation. Journal of Advanced Research in Applied Mathematics and Statistics, 4(3&4), 16-23.
[63] Mishra, R., Aggarwal, S., Chaudhary, L., & Kumar, A. (2020). Relationship between Sumudu and some efficient integral transforms. International Journal of Innovative Technology and Exploring Engineering, 9(3), 153-159.
[64] Elzaki, T.M. (2011). The new integral transform “Elzaki transform”. Global Journal of Pure and Applied Mathematics, 7(1), 57-64.

Sudhanshu Aggarwal, Aakansha Vyas, Swarg Deep Sharma "Primitive of Faltung Type Volterra Integro-Differential Equation of First Kind Using Elzaki Transform" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.144-150 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/144-150.pdf

For Full Text Click here

Share on Social media

Contributions of Non-Timber Forest Products to the Standard of Living of Rural Dwellers in Edo State, Nigeria

Fadoyin, A.S., Agboje, I, Adebanjo, A.E, Adeleye, A.S, Oladipo, A.D., Olatunji, O.A Oladipupo-Alade, E.O, Sangotoyinbo, O.A. and Haastrup, N. O
July 2020
Page No.: 151-155

Non-timber forest products (NTFPs) represent significant aspect of human existence and how they contribute to rural dwellers living standard should be explored. This study therefore assessed the contributions of non-timber forest products to the standard of living of rural dwellers in Edo State, Nigeria. Specifically, the study described the socio-economic characteristics of the rural dwellers in the study area, ascertained major NTFPs the rural dwellers gather, determined the income made from NTFPs and other sources, assessed the motivating factors for participating in NTFPs gathering, assessed the standard of living of the rural dwellers and determined the constraints faced by the rural dwellers in NTFPs gathering. Multistage sampling procedure was used to select 347 respondents; however 270 copies of questionnaire were usable giving a response rate of 77.8%. Data obtained were described using frequency counts, percentages and mean scores; Finding reveal that, non-timber forest products gathering in Edo State was male dominated ( 73.3%), 96% were married and 41% had formal education. Major non-timber forest products gathered in the area were Fuel wood (86.7%), vegetables (86.3%) and medicinal plants (58.1%).

Page(s): 151-155

Date of Publication: 15 August 2020

Fadoyin, A.S.
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Agboje, I
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Adebanjo, A.E
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Adeleye, A.S
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Adeleye, A.S.
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Olatunji, O.A
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Oladipupo-Alade, E.O
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Sangotoyinbo, O.A.
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria
Haastrup, N. O
Forestry Research Institute of Nigeria, Jericho, Ibadan, Nigeria

References

[1] Aiyeloja, A. A. et. al (2006). Non-timber forest products’ marketing in Nigeria. A case study of Osun state. Educational Research and Reviews Vol. 1 (2), pp. 52-58.
[2] Aju P.C and Uwalaka, (2010): Forest Resources and the Economy of Rural Nigerians. In Ijeomah H.M and Aiyeloja A.A (eds): Practical Issues in Forest and Wildlife Resources Management. Green Canopy Consultants, Choba, Port Harcourt, Nigeria. 172-191
[3] Duong NH. The Role of Non Timber Forest Products in Livelihood Strategies and Household Economics in a Remote Upland village in the Upper ca River Basin, Nghe the Phuong. Journal of Science and Development. 2008; 1:88-98.
[4] Mulenga, B. P. et al. (2011). The Contribution of Non-Timber Forest Products to Rural Household Income in Zambia. WORKING PAPER NO. 54 FOOD SECURITY RESEARCH PROJECT LUSAKA, ZAMBIA
[5] Shankar, U., Murali, K.S., Shaanker, R.U., Ganeshaiah, K.N. & Bawa, K.S. (1996) Extraction of non‐timber forest products in the forest of Bilingiri Rangan Hills, India. III. Productivity, extraction and prospects of sustainable harvest of Amla phyllanthus emblica, (Euphorbiaceae). Economic Botany, 50, 270– 279.

Fadoyin, A.S., Agboje, I, Adebanjo, A.E, Adeleye, A.S, Oladipo, A.D., Olatunji, O.A Oladipupo-Alade, E.O, Sangotoyinbo, O.A. and Haastrup, N. O "Contributions of Non-Timber Forest Products to the Standard of Living of Rural Dwellers in Edo State, Nigeria" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.151-155 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/151-155.pdf

For Full Text Click here

Share on Social media

Bandwidth Monitoring and Network Usage in a Wireless Network

Hameed Aderemi, Fabiyi Aderanti, Akanji Wasiu, Amosa Babalola
July 2020
Page No.: 156-161

This study was undertaken to investigate the usage of the wireless network and monitoring of its bandwidth in Federal Polytechnic Ede, the study became paramount because of the need to ascertain the adequacy of the bandwidth for the Polytechnic community and to also confirm the purpose of usage by the users. Questionnaire and onsite observation are the major instruments used for data acquisition. The results show the uplink and downlink speed of the bandwidth in three different locations in the Polytechnic for three days. It also gives a comparative picture of the network usage among the academic and non-academic staff. The result will however assist the decision makers about the need to upgrade the bandwidth to meet the need of the Polytechnic and create more awareness of the availability of the benefits in the information superhighway.

Page(s): 156-161

Date of Publication: 16 August 2020

Hameed Aderemi
Department of Computer Science, Federal Polytechnic Ede, Nigeria
Fabiyi Aderanti
Department of Computer Science, Federal Polytechnic Ede, Nigeria
Akanji Wasiu
Department of Computer Science, Lagos State Polytechnic Lagos, Nigeria
Amosa Babalola
Allbytes Research Group, Lagos Nigeria

References

[1] Ashok Kumar Tripathi, Ramesh Bharti (2015) An Effective Bandwidth Management by Compression Technique for Performance Enhancement In a System. International Journal of Scientific Research Engineering & Technology (Ijsret), Volume 4, Issue 6, June 2015, Pp670-677
[2] Ahmad Yusri Dak, Saadiah Yahya, and Murizah Kassim (2012) A Literature Survey on Security Challenges in VANETs International Journal of Computer Theory and Engineering, Vol. 4, No. 6, pp 1007 - 1010
[3] Lockias Chitanana (2012) Bandwidth management in Universities in Zimbabwe: Towards a responsible user base through effective policy Implementation. International Journal of Education and Development using Information and Communication Technology. Vol. 8, Issue 2, pp. 62 – 76.
[4] Zheleva ,M., Schmitt, P., Vigil, M., & Belding, E. (2015) Internet Bandwidth upgrade: Implications on performance and usage in rural Zambia. Information Technologies and International Development, 11(2) pp. 1 -17.
[5] Abhishek Sinha, Nishant Kuma (2013) Bandwidth Monitoring Tools. UACEE International Journal of Advances in Computer Networks and its Security. IJCNS, Volume 3: Issue 2. pp 116 – 120.
[6] International Telecommunications Union (ITU), (2013) . The World in 2013: Facts and figures. Retrieved from http://www.itu.int/en/ITU-D/Satatistics/Documents/Facts/ICT FactsFigures2013-e.pdf
[7] Matthee, K.W., Mweemba, G., Pais, A.V., Van Stam, G., & Rijjken, M. (2007) Bringing Internet Connectivity to rural Zambia using a collaboration approach. Paper presented at the International Conference on Information and Communication Technologies and Development, Bangalore, India. Doi: 10.1109/2007.4937391
[8] Surana, S., Patra, R., Nedevschi, S., Ramos, M., Subramanian, L, Ben-David, Y., & Brewer, E. (2008). Beyond pilots: Keeping rural wireless networks alive. Paper presented at the 5th USENIX Symposium on Networked Systems Design and Implementation, San Francisco, CA. Retrieved from http://tier.cs.berkeley.edu/docs/wireless/nsdi- surana.pdf
[9] Tun Tun Oo, Africa Aaron Don, " Design and Implementation of Data and Voice Redundancy and Line Aggregation for VOIP with multiple links," International Journal of Engineering & Technology, 8 (1.6) (2019) 23-29
[10] Falahah Suprapto, Dewi Rosmala (2012) Study of Social Networking Usage in Higher Education Environment. Procedia - Social and Behavioral Sciences 67:156–166 • December 2012 DOI: 10.1016/j.sbspro.2012.11.316
[11] [Wucherl Yoo, Alex Sim (2015) Network Bandwidth Utilization Forecast Model on High Bandwidth Networks. International Conference on Computing, Networking and Communications. DOI: 10.1109/ICCNC.2015.7069393 •
[12] Tom Karygiannis, Les Owens (2002), Wireless Network Security802.11, Bluetooth and Handheld DevicesComputer Security Division Information Technology Laboratory ,National Institute of Standards and Technology, Gaithersburg, MD 20899-8930
[13] http://www.whatismyip.com/.

Hameed Aderemi, Fabiyi Aderanti, Akanji Wasiu, Amosa Babalola "Bandwidth Monitoring and Network Usage in a Wireless Network" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.156-161 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/156-161.pdf

For Full Text Click here

Share on Social media

Growth and Yield of Okra (Abelmoschus esculentus (L.) Moench) Under the Influence of Different Organic Fertilizers

Matthew Aluko, Abosede F. Kehinde-Fadare, Olufemi S. Oluwole
July 2020
Page No.: 162-166

The desire for organic food products by consumers is on the increase due to its health benefits despite the higher cost of such food products. Therefore at the Teaching and Research Farm of the Ekiti State University, Ado Ekiti, Nigeria, a field experiment was conducted to investigate the effect of five organic fertilizers; Moringa compost (MC), Tithonia compost (TC), fresh moringa leaf (FM), poultry manure (PM), and fresh Tithonia leaf (FT) on the growth and yield of okra in a randomized complete block design in five replications. Data on growth and yield parameters collected were subjected to analysis of variance and treatment means separated using Turkey post-hoc test at 5% level of probability.. Although MC and PM gave a higher number of leaves (5.3), plant height (22.6 and 21.9 cm), and stem girth (2.8 and 2.9 cm), they did not differ significantly from other treatments. PM produced higher leaf area (173.9 cm²) which did not differ significantly from 162.3 cm² for MC. MC produced 1.3 number of flowers which was significantly higher than 0.9, 0.84, 0.8, 0.72, for PM, FT, FM and control respectively. Although MC produced higher number of fruit plant^-1 (1.8), PM gave the higher okra fruit weight fruit^-1 (0.19 kg) and fruit yield (1.20 t ha^-1). The five organic fertilizers used for okra production in this study produced significantly higher fruit yield than the control. However, MC and PM are recommended due to the significant increase in growth and yield components.

Page(s): 162-166

Date of Publication: 17 August 2020

Matthew Aluko
Department of Crop, Horticulture and Landscape Design, Ekiti State University, P.M.B. 5363, Ado-Ekiti, Ekiti State, Nigeria
Abosede F. Kehinde-Fadare
Department of Crop, Horticulture and Landscape Design, Ekiti State University, P.M.B. 5363, Ado-Ekiti, Ekiti State, Nigeria
Olufemi S. Oluwole
Department of Crop, Horticulture and Landscape Design, Ekiti State University, P.M.B. 5363, Ado-Ekiti, Ekiti State, Nigeria

References

[1]. Ademiluyi, B. O. (2012). Effect of Tithonia diversifolia (Hemsl) A. Gray on the growth and yield of okra (Abelmuscus esculentus). Journal of Agricultural Science and Technology. B, 2(2B), 219
[2]. Adepetu, J. A., Adetunji, M. T. and Ige, D. V. (2014). Soil Fertility and Crop Nutrition. Jumak Publishers, Ring Road, Ibadan. 560pp
[3]. Afe, A. I., and Oluleye, F. (2017). Response of okra (Abelmuschus esculenthus L. Moench) to combined organic and inorganic foliar fertilizers. International Journal of Recycling of Organic Waste in Agriculture, 6(3), 189-193.
[4]. Akande, M.O., Oluwatoyinbo, F.I., Adediran, J.A. and Buari, K. (2003). Soil amendments affect the release of P from rock phosphate and the development and yield of Okra. Journal of Vegetable Crop Production, 9(2): 3-9, https://doi.org/10.1300/J068v09n02_02
[5]. Akande, M. O., Oluwatoyinbo, F. I. ,Makinde, E. A., Adejoju, A. S. and Adepoju, I. S. (2010). Response of okra to organic and inorganic fertilization. Nature of Science, 8:261 - 266.
[6]. Aluko, M., Ayodele, O. J., Samuel Gbadeola, A., & Oni, I. H. (2017). Comparative Effects of Varying Rates of Moringa Leaf, Poultry Manure and NPK Fertilizer on the Growth, Yield and Quality of Okra (Abelmoschus esculentus L. Moench). International Journal of Environment, Agriculture and Biotechnology, 2(6), 238981.
[7]. Aluko, M., and Olajide, O. (2020). Prospects of Integrated Application of Moringa (Moringa oleifera) Leaf Extract, NPK Fertilizer and Poultry Manure on Okra (Abelmoschus esculentus) Production. Asian Journal of Research in Crop Science, 1-6.
[8]. Arapitsas, P. (2008). Identification and quantification of polyphenolic compounds from okra seeds and skins. Food Chemistry, 110:1041 - 1045.
[9]. Ayeni, A. O., Lordbanjou, D. T., Majek, B. A., (1997) Tithonia diversifolia(Mexican Sunflower) in south-western Nigeria: Occurrence and growth habit. Weed Res. (Oxford) 37, 443–449.
[10]. Ayeni, L.S. (2011). Integrated Plant nutrition management: A panacea for sustain-able crop production in Nigeria. International Journal of Soil Sciences, 1: 19-24.
[11]. Fagwalawa, L. D., &Yahaya, S. M. (2016). Effect organic manure on the growth and Yield of Okra. Imperial Journal of Interdisciplinary Research, 2(3), 130-133.
[12]. Fahey, J.W., 2005. Moringa oleifera: a review of the medical evidence for its nutritional, therapeutic, and prophylactic properties. Part 1. Trees Life J. 1, 5 .
[13]. Fuglie, L. J. (2008). New Uses of Moringa Studied in Nicaragua: ECHO's Technical Network Site networking global hunger solutions. ECHO, Nicaragua: 1-7.
[14]. Green, B.W. (2015). Fertilizers in aquaculture. In: Davis, D. A., editor. Feed and Feeding Practices in Aquaculture. Sawston, Cambridge: Woodhead Publishing Ltd. p. 27-52.
[15]. Gordon, W. B., Whitney, D. A. and Raney, R. A. (1993). Nitrogen management in furrow irrigated, ridge tilled corn. J. Production Agric. 6:213-217
[16]. Ibeawuchi, IK.; Onweremadu, EU; Oti, NN (2006). Effects of Poultry Manure on Green (Amaranthuscruentus) and Waterleaf (Talinumtrinagulare) on Degraded Ultisol of Owerri Southeastern Nigeria. J. Animal and Vet. Advances 5; 53-56
[17]. Ibeawuchi, I. K. (2007). Intercropping a food production strategy for resource poor farmers. Nature and Science, 5: 46-49.
[18]. Jonah, P. M., Timon, F., Bongi, A. D., Mibzar, R., and Mshelmbula, B. P. (2017). Growth And Yield Traits Of Okra (Abelmoschus Esculentus L.) Moench, As Influenced By NPK 15: 15: 15
[19]. Khandaker, M. M., Jusoh, N., Hafiza, N. A. A. R., and Ismail, S. Z. (2017). The effect of different types of organic fertilizers on growth and yield of Abelmoschus esculentus. Moench (Okra). Bulgarian Journal of Agricultural Sciemce, 23(1), 119-125.
[20]. Kwayep, L. N., Suh, C., Konje, C., Manga, A., Kenfo, T., Lombeko, V., and DjomoSime, H. (2017). Effects of different soil amendments on the performance of okra (Abelmoschus esculentus L.) in a bimodal rainforest zone. African Journal of Agricultural Research, 12(24), 2056-2062.
[21]. Ohr, L. M. (2004). Dietary antioxidants. Food Technology, 58(10), 67–74
[22]. Olabode, O. S., Ogunyemi, S., Akanbi, W. B., Adesina, G. O. and Babajide, P. A. (2007). Evaluation of Tithoniadiversifolia(Hemsl.) A Gray for Soil Improvement. World Journal of Agricultural Sciences 3 (4): 503-507
[23]. Olowokere, F. A., and Odulate, L. O. (2019). Effects of Tithonia diversifolia, Poultry Manure, Cow dung, and their Composts on Soil Chemical Properties under Okra (Abelmoschus esculentus L. Moench) Production. Journal of Organic Agriculture and Environment, 6.
[24]. Olujobi, O. J. and Ayodele, O.J. (2013). Growth and yield of okra (Abelmoschusesculentus) in response to tree legume manure and urea fertilizer. IJAFS 4(12): 502-509
[25]. Omotoso, S. O., .Fawole, F. O., Aluko, M and Kehinde-Fadare, A. F. (2018). Growth and yield of two okra (Abelmoschus Esculentus L.Moench) varieties as affected by organic fertilizer grown on an Oxic Paleustalf in Ekiti State. Global Advanced Research Journal of Agricultural Sciences Vol.7(4). 137-144.
[26]. Onunkun, O. (2012). Evaluation of Aqueous Extracts of five plants in the control of flea beetles on Okra (Abelmoschusesculentus (L.) Moench). J. Biopest, 5 (Supplementary). 62-67
[27]. Opala, P. A., Kisinyo, P. O. and Nyambati, R. O. (2015) Effects of Tithoniadiversifolia, farmyard manure andurea,and phosphate fertiliser application methods on maize yields
in western Kenya. Journal of Agriculture and Rural Development in the Tropics and Subtropics.116(1):1–9.
[28]. Schippers, R.R. (2000). African Indigenous Vegetable: an overview of the Cultivated Species. ChalthamU.K. National Resources Institute A.C.D.E.U. Technical Centre for Agriculture and Rural Crop. Pp. 105 – 117.
[29]. Senjobi, BA; And, OT; Senjobi, CT; Adepiti, AO; Adigun, MO (2013). Performance of Abelmoschus esculentus(L) Moench (OKRA) under various applications of pesticides and fertilizers in an OxicPaleustalf. Int. J. Plant SoilSci. 2(1):24-40.
[30]. Siemonsma, J.S. and Hamon, C.S. (2002). Abelmoschus caillei (A.Chev.) stevels Record from Protabase.Oyen, L.P.A. and Lemmens, R.H.M.J (Eds.) PROTA (Plant Resources of Tropical Africa/Resources Vegetables de l’Afriquetropicale), Wageningen, The Netherlands.
[31]. Udo, E.J.,Ibia,T.O.,Ogunwale,J.A.,Ano,A.O.and Esu, I. E. (2009). Manual of Soil, Plant andWaterAnalyses.SibonBooksLimited,Lagos,Nigeria, Pages: 183.
[32]. Yiridoe, E., Bonti-Ankomah, S., & Martin, R. (2005). Comparison of consumer perceptions and preference toward organic versus conventionally produced foods: A review and update of the literature. Renewable Agriculture and Food Systems,20(4), 193-205. Retrieved June 25, 2020, from www.jstor.org/stable/44490443

Matthew Aluko, Abosede F. Kehinde-Fadare, Olufemi S. Oluwole "Growth and Yield of Okra (Abelmoschus esculentus (L.) Moench) Under the Influence of Different Organic Fertilizers" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.162-166 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/162-166.pdf

For Full Text Click here

Share on Social media

Composition and Optical Properties of Quaternary Alloy of PbCuSO₄ Thin Films Prepared by Advanced SILAR Deposition Technique

J.I. Onwuemeka
July 2020
Page No.: 167-170

PbCuSO₄ thin films were prepared by SILAR method on glass substrates using Pb(NO₃)₂and CuSO₄:5H₂O as the cationic precursors, hydrogen peroxide and thiourea as the anionic precursors and Triethanolamine (TEA) (C₆H₁₅NO₃) as the complexing agent. The samples were subjected to heat treatments at 100^oC , 150^oC, 200^oC, and 250^oC for 1hour. The samples were transparent and adherent to the substrates. The transmittance increases from 0.13 to 0.64 as the wavelength increases from 300nm to 1100nm for the samples as measured by UV 1800 series double beam spectrophotometer. The band gaps obtained under various thermal treatments are between 3.5 ±0.05eV to 3.75±0.05eV. The thickness for PC₁ is 386nm, PC₂ is 592nm, PC₃ is 403.29nm and PC₄ is 399nm. These properties of the material makes it suitable for applications in solar cells, gas sensor, thin absorber, aesthetic window, smart window antireflection coating.

Page(s): 167-170

Date of Publication: 18 August 2020

J.I. Onwuemeka
Department of Physics, Imo State University, Owerri, Imo State Nigeria

References

[1] Debbarma, M and Saha , M. (2015) Synthesis and I-V characterization of cuprous oxide nanocomposites. International Journal of Scientific and Research Publications, 5, Issue 6, June 2015 1 ISSN 2250-3153.
[2] Eliseev,A.A., Lukashin,A.V., Vertegel, A.A., Heifets, L.I.., Zhirov, A.I., Tretyakov, Y.D. (2000) Material Resources Innovation pp 34-67
[3] Fernández-Garcia, M, Rodriguez, J. A. (2007). Metal Oxide Nanoparticles. Cambridge University Press pp 45-4
[4] Hernández-Borja, J., Vorobiev, Y. V., Ramírez-Bon, R. (2011). Thin film solar cells of CdS/PbS chemically deposited by an ammonia-free process. Journal of solar energy material and solar cells 95(7) 1882-1888
[5] Horaka, P., Bejsoveca,V., Vacika,J., Lavrentieva,V., Vrnatab,M.,Kormundac,M.Danis, S. (2016). Thin copper oxide films prepared by ion beam sputtering withsubsequent thermal oxidation: Application in chemiresistors. Journal of Applied Surface Science. 389 (12) 751–759.
[6] Jana, S., Srivastava, B.B., Pradhan, N. J. (2011). Correlation of Dopant States and Host Bandgap in Dual-Doped Semiconductor Nanocrystals. Journal of Physical Chemistry Letters 2 (14), 1747–1752.
[7] Jing, S., Xing, S., Wang, Y., Hu, H., Zhao, B., Zhao, C. (2008). Synthesis of 3D well-packed octahedral Pbsnanocrystal arrays. Journal of Material Letter. 62(7) 977-979
[8] Lanje,A.S ., Ningthoujam, R.S., Sharma, S. J., Pode, R. B., and Vatsa, R. K. (2010). “Luminescence properties of Sn1-xFexO2 Nanoparticles. International Journal of Nanotechnology, 7( 9): 979–988
[9] Onwuemeka, J.I., Nwulu, N.C (2017). The study of the deposition, compositions and optical properties of CdO thin films at 60oC-100oC of NaOH solution and annealed at 200oC for 1hour and 3hours, prepared by Solution Growth Technique. International Journal Of Innovative Research And Knowledge. 2(5): 29-35.
[10] Ratanatawanate, C., Xiong, C., Balkus, K. (2008). Fabrication of PbS Quantum Dot Doped TiO2 Nanotubes. Journal of ACS Nanotechnolgy, 2008, 2 (8), pp 1682–1688.
[11] Ray, S.C (2001). Solar Energy Mater. Solar Cells. Journal of solid state physics 68 (2) 307.
[12] Srinivasan, G., Rasmussen, E.T., Levin, B.J and Hayes, R. (2002). Physical Review B 65: 134402.
[13] Üst , U. C., Dağcı , K., Alanyalıoğlu, M. (2016). Electrochemical approaches for rearrangement of lead sulfide thinfilms prepared by SILAR method. Journal of material science in semiconductor processing. 41: 270–276.
[14] Zheng, X., Gao, F., Ji, F., Wu, H., Zhang, J., Hu , X., Xiang, Y. (2016). Cu-doped pbS thin films with low resistivity prepared via chemical bath deposition. Journal of materials letters 167 128 – 130.

J.I. Onwuemeka "Composition and Optical Properties of Quaternary Alloy of PbCuSO₄ Thin Films Prepared by Advanced SILAR Deposition Technique" International Journal of Research and Innovation in Applied Science -IJRIAS vol.5 issue 7 July 2020, pp.167-170 URL: https://www.rsisinternational.org/journals/ijrias/DigitalLibrary/Vol.5&Issue7/167-170.pdf

For Full Text Click here

Share on Social media

International Journal of Research and Innovation in Applied Science

ISSN No. 2454-6194

Committed to Quality Research and Publications

Effect of Internal Energy on Specific Heat of Cuprates using s-Wave and d-Wave Hybrid Model

Infection Status of Paramphistomes in Cattle at Northern Area of Bangladesh

GC-MS Analysis of Some Phytochemical Constituents in Stem Bark of Khaya Senegalensis (Desr.) A. Juss

Determination of Heavy Metal Content in Several Commercially Available Fruit Juices in Sri Lanka

Solutions of Population Growth and Decay Problems Using Sumudu Transform

Comparative Analysis of Biogas Produced from Treated Oil-Palm Husks

Laplace-Carson Transform for the Primitive of Convolution Type Volterra Integro-Differential Equation of First Kind

Synthesis and Characterization of a Gel-Biopolymer from Cane Sugar and Polymethyl acrylate

Smart Safe Alert for Passengers Using IOT

Adsorbent Material from Grafting Polymethylacrylate unto Methylcellulose from Elephant (Napier) Grass Cellulose

Acceptability and Nutrient Composition of Multiple Blend Fruity Creams

Factors Influencing Exclusive Breastfeeding (EBF) Practices among Female Health Workers in Ekiti State University Teaching Hospital (EKSUTH), Ado-Ekiti, Ekiti State, Nigeria

Sales Forecasting Using Prediction Analytics Algorithm

Comparison of Technical Efficiency across Scale of Paddy Processing in Adamawa State, Nigeria

Modelling Apiculture Production in Adamawa State, Nigeria: The Ordinary Least Squares Technique

Activity Concentration Levels of Natural Radionuclides in the Sediment Samples from Rosterman Gold Mine, Lurambi Sub – County, Kakamega County, Kenya

Environmental Regulations in Nigeria: A Lesson from United Kingdom

Optimum Dietary Crude Protein and Digestible Energy Requirements for fingerlings of Hybrid Clariid catfish Heterobranchus bidorsalis♀ X Clarias gariepinus♂ in the Tropics

A Conceptual of Supply Chain Management Distribution System to Minimize Leadtime and Distribution Fees in Retail Industry

Automatic Engine Locking System for Drunken Driver

Perception towards Forest Resources Utilization among Enclaves in Onigambari Forest Reserve, Oyo State

Evaluation of Toxicity Potentials of Heavy Metals in Camel Milk from Selected Farms in Yobe State, Nigeria

Soret Effect on MHD Free Convection through a Porous Inclined Channel in the Presence of Thermal Radiation

Growth Response of Grower Rabbits (Oryctolagus Cunniculus) Fed Diets Containing Graded Levels of Anaerobically Fermented Cassava/Palm Kernel Meals

Statistical Analysis of Time Series Model: Additive Case

Solution of Convolution Type Volterra Integro-Differential Equation of First Kind Using Kamal Transformation

Primitive of Faltung Type Volterra Integro-Differential Equation of First Kind Using Elzaki Transform

Contributions of Non-Timber Forest Products to the Standard of Living of Rural Dwellers in Edo State, Nigeria

Bandwidth Monitoring and Network Usage in a Wireless Network

Growth and Yield of Okra (Abelmoschus esculentus (L.) Moench) Under the Influence of Different Organic Fertilizers

Composition and Optical Properties of Quaternary Alloy of PbCuSO₄ Thin Films Prepared by Advanced SILAR Deposition Technique