International Journal of Research and Innovation in Applied Science (IJRIAS)

Shivkumari Panda, Dibakar Behera, Prasant Rath, Tapan Kumar Bastia – October 2017 Page No.: 01-07

This paper reports successful fabrication and study of various properties of a unique blend based nanocomposite containing Unsaturated polyester (UPE) /Epoxidized soybean oil Acrylate (ESOA) resin(80:20w/w) with varying content of graphene nanoplatelets (GNPs) as the reinforcing filler. The composite was prepared by a novel technique with the use of a high intensity ultrasonicator and then hot press casting method. Three different specimens of UPE/ESOA nanocomposites were fabricated with addition of 1, 3 and 5 wt% of GNPs. 3wt% nanofiller loading showed superior essential characteristics and after that the properties reduced may be due to the nucleating tendency of the nanofiller particles. UPE/ESOA reinforced with GNPs resulted in an enhancement of properties. Also the XRD pattern showed the compatibility of the GNPs by introducing a peak around 270 in the nanocomposites. FTIR spectroscopy and SEM Properties are also in agreement with the compatibility. Nanocomposite with 3wt% GNPs also showed remarkable enhancement in mechanical, dynamic mechanical, thermal and electrical properties with successful enhancement in Tg corroborated from DSC analysis owing to the homogeneous distribution of nanofiller in the blend. So by introduction of a small quantity of graphene nanoplatelets endow the new class of multiphase nanocomposites with inimitable structure and unexpected broaden applicability.

  •  Page(s): 01-07
  •  Date of Publication: 09 October 2017
  •  Shivkumari Panda
    School of Applied Sciences (Chemistry),
    KIIT University, Bhubaneswar, Odisha, 751024, India
  •  Dibakar Behera
    School of Applied Sciences (Chemistry),
    KIIT University, Bhubaneswar, Odisha, 751024, India
  •  Prasant Rath
    School of Applied Sciences (Chemistry),
    KIIT University, Bhubaneswar, Odisha, 751024, India
  •  Tapan Kumar Bastia
    School of Applied Sciences (Chemistry),
    KIIT University, Bhubaneswar, Odisha, 751024, India

References

 

[1]. Singh, K., Ohlan, A., Dhawan, S. K., (2012). Polymer-Graphene Nanocomposites: Preparation, Characterization, Properties, and Applications. 3rd Chapt: INTECH.
[2]. Potts, J. R., Dreyer, D. R., Bielawski, C. W., Ruoff. R. S., (2011) Graphene-based polymer nanocomposites. Polym. Jan7; 52(1): 5–25.
[3]. Khot, S.N., Lascala, J.J., Can, E., Morye, S.S., Williams. G.I., Palmese. G.R., Kusefoglu, S.H., Wool. R.P. (2001)Development and application of triglyceride based polymers and composites. J.Appl.Polym.Sci. Aug13; 82(3):703-723.
[4]. Raquez, J.M., Deléglise, M., Lacrampe, M.F., Krawczak. P. (2010)Thermosetting (bio) materials derived from renewable resources: A critical review. ‎Prog. Polym. Sci. Mar; 35(4): 487-509.
[5]. LaScala, J., Wool, R. P. (2005) Property analysis of triglyceride- based thermosets. Polym. Jan; 46(1): 61-69 .
[6]. Fu, L., Yang, L., Dai, C., Zhao, C., Ma, L. (2010)Thermal and mechanical properties of acrylated expoxidized-soybean oil-based thermosets. J.Appl.Polym.Sci. Aug13; 117(4): 2220-2225.
[7]. Behera, D., Banthia, A.K. (2008) Synthesis, characterization and kinetics study of thermal decomposition of epoxidised soybean oil acrylate (ESOA). J.Appl.Polym.Sci. May9;109(4): 2583-2590.
[8]. Panda, S. K., Mohanty, P., Behera, D., Bastia, T. K. (2016)ESOA modified unsaturated polyester hybrid networks: A new perspective. J.Appl.Polym.Sci,Sept6;133(48).Available from: https://onlinelibrary.wiley.com/doi/10.1002/app.v133.48/issuetoc doi: 11002/APP.44345.
[9]. Zandiatashbar, A., Picu, R.C., Koratkar, N. (2012) Mechanical behavior of epoxy-graphene platelets Nanocomposites. J Eng Mater Technol. May; 134(3): 031011–031016.
[10]. Yang, S. Y., Lin, W. N., Huang, Y. L., Tien, H. W., Wang, J. Y., Ma, C. C., Li, S. M. (2011) Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites. Carbon. Mar; 49(3): 793–803.
[11]. Ahmadi-Moghadam, B. , Taheri, F. (2014) Effect of processing parameters on the structure and multi-functional performance of epoxy/GNPS-nanocomposite. J. Mater. Sci. Jun10; 49(18):6180–6190.
[12]. Li, W., Dichiara, A., Bai, J. (2012) Carbon nanotube-graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites. Compos. Sci. Technol. Dec 6; 74: 221–227.
[13]. Causin, V., Marega, C., Marigo, A., Ferrara,,G., Ferraro, A. (2006) Morphological and structural characterization of polypropylene /conductive graphite nanocomposites. Eur. Polym. J. Jun; 42(12), 3153–3161.
[14]. Yasmin, A., Luo ,J.J., Daniel, I. M. (2006) Processing of expanded graphite reinforced polymer Nanocomposites. Compos. Sci. Technol. Nov; 66(9):1182–1189.
[15]. Zhao, X., Zhang, Q., Chen, D., Lu, P. (2010) Enhanced mechanical properties of graphene-based poly(vinyl alcohol) composites. Macromolecules. Feb9; 43(5):2357–2363.
[16]. Finkenstadt, V., Liu, C. K., Cooke, P., Liu, L., Willett, J. (2008) Mechanical property characterization of plasticized sugar beet pulp and poly(lactic acid) green composites using acoustic emission and confocal microscopy. J. Polym. Environ. Jan; 16(1): 19–26.
[17]. Wang, Z., Nelson, J.K., Miao, J., Linhardt, R.J., Schadler, L.S., Hillborg, H., Zhao, S. (2013) Dielectric constant and breakdown strength of polymer composites with high aspect-ratio fillers studied by finite element models. Compos. Sci. Technol. Mar; 76:960–6.

Shivkumari Panda, Dibakar Behera, Prasant Rath, Tapan Kumar Bastia “Advances in Physical Performances of UPE/ESOA Partially Bio-nanocomposites Reinforced with Graphene Nanoplatelets” International Journal of Research and Innovation in Applied Science -IJRIAS vol.2 issue 8, pp.01-07 2017

For Full Text Click here
pdf download

Rajesh Bhargava, Hitesh Khandelwal, Nahid Akhtar – October 2017  Page No.: 08-10

Experimental Study of Reinforced Composite comprises of the process of fabrication of reinforced composite by introducing aramid fibre and sawdust in the vinyl resin matrix in various proportions, in particular, with different weight fraction. And analysis of the test results of these samples is performed to understand the change in specific mechanical properties in accordance to the change in the fraction of fibre used in the resin.

  •  Page(s): 08-10
  •  Date of Publication: 09 October 2017
  •  Rajesh Bhargava
    M.Tech Scholar, Department of Mechanical Engineering,
    LIET, Alwar, Rajasthan, India
  •  Hitesh Khandelwal
    Assistant Professor, Department of Mechanical Engineering,
    LIET, Alwar, Rajasthan, India
  •  Nahid Akhtar
    Assistant Professor, Department of Mechanical Engineering,
    LIET, Alwar, Rajasthan, India

References

 

[1]. A. P. Harsha and U. S. Tewari, “Abrasive wear of glass fibre reinforced polysulfone composites,” Indian Journal of Engineering & Materials Sciences, vol. 9, no. 3, pp. 203–208, 2002.
[2]. N. Chand and B. Das Jhod, “Mechanical, Electrical, and Thermal properties of maleic anhydride modified rice husk filled PVC composites,” BioResources, vol. 3, no. 4, pp. 1228–1243, 2008.
[3]. N. Chand, S. C. Prajapati, and R. K. Singh, “Development and characterization of sisal nano fibre reinforced polyolefin composites,” Journal of Scientific Research and Reviews, vol. 1(3), no. 9, pp. 26–32, 2012.
[4]. G. B. Chai and P. Manikandan, “Low velocity impact response of fibre-metal laminates – A review,” Composite Structures, vol. 107, pp. 363–381, 2014.
[5]. R. Yahaya, S. M. Sapuan, M. Jawaid, Z. Leman, and E. S. Zainudin, “Quasi-static penetration and ballistic properties of kenaf-aramid hybrid composites,” Materials and Design, vol. 63, pp. 775–782, 2014.
[6]. Y. Swolfs, L. Gorbatikh, and I. Verpoest, “Fibre hybridisation in polymer composites: A review,” Composites Part A: Applied Science and Manufacturing, vol. 67, pp. 181–200, 2014.
[7]. Z. Sun, X. Hu, and H. Chen, “Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate,” International Journal of Adhesion & Adhesives, vol. 48, pp. 288–294, 2014.
[8]. S. Hussain et al., “Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites,” Surface and Coatings Technology, vol. 258, pp. 458–466, 2014.
[9]. N. P. Sahu, D. K. Khande, G. C. Patel, S. K. Bohidar, and P. K. Sen, “Study on Aramid Fibre and Comparison with Other Composite Materials,” International Journal for Innovative Research in Science & Technology, vol. 1, no. 7, pp. 303–306, 2014.
[10]. J. H. Song, “Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibers,” Composites Part B: Engineering, vol. 79, pp. 61–66, 2015.
[11]. B. Cai and Y. H. Yuan, “Research on performance of aramid fibre composite,” Materials Research Innovations, vol. 19, no. 10, pp. 30–32, 2015.
[12]. L. Xing, L. Liu, Y. Huang, D. Jiang, B. Jiang, and J. He, “Enhanced interfacial properties of domestic aramid fiber-12 via high energy gamma ray irradiation,” Composites Part B: Engineering, vol. 69, pp. 50–57, 2015.
[13]. T. Uygunoglu, I. Gunes, and W. Brostow, “Physical and Mechanical Properties of Polymer Composites with High Content of Wastes Including Boron,” Materials Research, vol. 18, no. 6, pp. 1188–1196, 2015.
[14]. Z. Ge, D. Si, Y. Lan, and M. Shi, “The Effect of Modifying Agents on the Mechanical Properties of Straw Flour/Waste Plastic Composite Materials,” Key Engineering Materials, vol. 723, pp. 56–61, Dec. 2016.
[15]. X. Qian, H. Wang, D. Zhang, and G. Wen, “High strain rate out-of-plane compression properties of aramid fabric reinforced polyamide composite,” Polymer Testing, vol. 53, pp. 314–322, Aug. 2016.
[16]. R. Polanský et al., “Development of a measuring system for on-line in situ monitoring of composite materials manufacturing,” Composites Part A: Applied Science and Manufacturing, vol. 90, pp. 760–770, Nov. 2016.
[17]. C. K. Iu, “Nonlinear analysis for the pre- and post-yield behaviour of a composite structure with the refined plastic hinge approach,” Journal of Constructional Steel Research, vol. 119, pp. 1–16, Mar. 2016.
[18]. A. Sarı, “Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials,” Energy Conversion and Management, vol. 117, pp. 132–141, 2016.
[19]. X. Chen, W. Wang, S. Li, and C. Jiao, “Fire safety improvement of para-aramid fiber in thermoplastic polyurethane elastomer,” Journal of Hazardous Materials, vol. 324, pp. 789–796, 2016.
[20]. R. Singh, R. Kumar, L. Feo, and F. Fraternali, “Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications,” Composites Part B: Engineering, vol. 101, pp. 77–86, 2016.
[21]. Ö. Y. Bozkurt, A. Erkliğ, and M. Bulut, “Hybridization effect on Charpy Impact behavior of Basalt/Aramid fibre reinforced hybrid composite laminates,” Polymer Composites, vol. 37, no. 2, 2016.
[22]. S. Badeli, S. Saliani, and A. Carter, “Effect of Short Aramid Fibers on Asphalt Performance,” Substance ÉTS, 2017.
[23]. N. G. Gonzalez-Canche, E. A. Flores-Johnson, and J. G. Carrillo, “Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene,” Composite Structures, vol. 172, pp. 259–266, 2017.
[24]. O. Arnould, D. Siniscalco, A. Bourmaud, A. Le Duigou, and C. Baley, “Better insight into the nano-mechanical properties of flax fibre cell walls,” Industrial Crops and Products, vol. 97, pp. 224–228, 2017.
[25]. Y. Şahin and P. De Baets, “Tribological behaviour of unidirectional carbon fibre-reinforced epoxy composites,” IOP Conference Series: Materials Science and Engineering, vol. 174, 2017.
[26]. D. Sheng et al., “Low-temperature dyeing of meta-aramid fabrics pretreated with 2-phenoxyethanol,” Coloration Technology, vol. 133, no. 4, pp. 320–324, 2017.
[27]. I. Zlotnikov, E. Zolotoyabko, and P. Fratzl, “Nano-scale modulus mapping of biological composite materials: Theory and practice,” Progress in Materials Science, vol. 87, pp. 292–320, Jun. 2017.
[28]. K. Shaker, A. Jabbar, M. Karahan, N. Karahan, and Y. Nawab, “Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar,” Journal of Composite Materials, vol. 51, no. 1, pp. 81–94, Jan. 2017.
[29]. S. Budhe, M. D. Banea, S. de Barros, and L. F. M. da Silva, “An updated review of adhesively bonded joints in composite materials,” International Journal of Adhesion and Adhesives, vol. 72, pp. 30–42, Jan. 2017.
[30]. J. Pach, D. Pyka, K. Jamroziak, and P. Mayer, “The experimental and numerical analysis of the ballistic resistance of polymer composites,” Composites Part B: Engineering, vol. 113, pp. 24–30, Mar. 2017.
[31]. A. Majumdar, B. S. Butola, N. Awasthi, I. CHauhan, and P. Hatua, “Improving the Mechanical Propertise of p-Aramid Fabrics and Composites by Developing ZnO Nanostructures,” Polymer Composites, vol. 38, no. 3, 2017.
[32]. Y. Pan, G. Wu, Z. Huang, X. Wu, Y. Liu, and H. Ye, “Corrosion behaviour of carbon fibre reinforced polymer/magnesium alloy hybrid laminates,” Corrosion Science, vol. 117, pp. 152–158, 2017.

Rajesh Bhargava, Hitesh Khandelwal, Nahid Akhtar “Experimental Study of Reinforced Composite” International Journal of Research and Innovation in Applied Science -IJRIAS vol.2 issue 8, pp.08-10 2017

For Full Text Click here
pdf download

Paper Submission Deadline

GET OUR MONTHLY NEWSLETTER