Thermodynamic and Kinetic Re-Assessment of Carbothermic, Hydrogen and Sulfuric Acid Routes for Processing Zinc-Bearing Electric Arc Furnace Dust
Authors
State Institution "Scientific and Practical Center for the Development of Localization and Industrial Cooperation in the Mining and Metallurgical Industry", Ministry of Mining Industry and Geology of the Republic of Uzbekistan, Tashkent (Uzbekistan)
Almalyk Branch of the National University of Science and Technology "MISIS", Almalyk (Uzbekistan)
Department of Metallurgy, Tashkent State Technical University named after Islam Karimov, Tashkent (Uzbekistan)
Department of Metallurgy, Tashkent State Technical University named after Islam Karimov, Tashkent (Uzbekistan)
Article Information
DOI: 10.51584/IJRIAS.2026.11100108
Subject Category: Engineering & Technology
Volume/Issue: 11/10 | Page No: 1577-1587
Publication Timeline
Submitted: 2026-11-01
Accepted: 2026-11-06
Published: 2026-11-17
Abstract
Electric arc furnace (EAF) dust stored at JSC Uzbeksteel (more than 60,000 t, with 10,000–13,000 t added every year) is a hazardous residue and also a concentrated secondary source of iron and zinc. Our group has examined three treatment options for this material in separate laboratory campaigns: carbothermic reduction with coke or petroleum coke, reduction with hydrogen gas, and leaching with spent sulfuric acid zinc electrolyte. Reported separately and on partly different bases, these campaigns did not show which route suits which dust. In this work the published data sets were brought onto a common basis and re-evaluated. Standard Gibbs energies were recalculated from tabulated thermochemical data, time–conversion curves were refitted with shrinking-core models, apparent activation energies were derived from the temperature series, and reagent demand was estimated from the dust chemistry. The main dust lot contains 31.2 wt.% Fe and 16.2 wt.% ZnO, which corresponds to roughly 18,700 t of iron and 7,800 t of zinc in the existing stockpile. In the carbothermic tests, ZnO conversion follows the Ginstling-Brounshtein diffusion model (R2 = 0.978), whereas FeO conversion is better described by chemical-reaction control (R2 = 0.944). Hydrogen reduction at 650–750 °C gives an apparent activation energy of about 42 kJ mol−1, against roughly 74 kJ mol−1 for carbothermic metallisation at 900–1150 °C. Wüstite reduction by H2 is equilibrium-limited in this window (K = 0.46–0.56), which raises the minimum hydrogen demand from 190 to about 370–410 Nm3 per tonne of dust. Theoretical acid consumption makes sulfuric acid leaching acceptable for the zinc-rich lot (about 2.4 kg H2SO4 per kg Zn) but not for a calcium-rich, low-zinc lot (about 39 kg per kg Zn). A grade-dependent flowsheet is therefore proposed in which hydrogen pre-reduction recovers metallic iron and the ZnO-rich residue goes to volatilisation or leaching.
Keywords
electric arc furnace dust, zinc recovery, hydrogen reduction, carbothermic reduction, reaction kinetics
Downloads
References
1. Chase, M. W. (1998). NIST-JANAF thermochemical tables (4th ed.). Journal of Physical and Chemical Reference Data, Monograph 9. American Institute of Physics. [Google Scholar] [Crossref]
2. Ginstling, A. M., & Brounshtein, B. I. (1950). Concerning the diffusion kinetics of reactions in spherical particles. Journal of Applied Chemistry of the USSR, 23(12), 1327–1338. [Google Scholar] [Crossref]
3. Guézennec, A.-G., Huber, J.-C., Patisson, F., Sessiecq, P., Birat, J.-P., & Ablitzer, D. (2005). Dust formation in electric arc furnace: Birth of the particles. Powder Technology, 157(1–3), 2–11. https://doi.org/10.1016/j.powtec.2005.05.006 [Google Scholar] [Crossref]
4. Havlík, T., Souza, B. V., Bernardes, A. M., Schneider, I. A. H., & Miškufová, A. (2006). Hydrometallurgical processing of carbon steel EAF dust. Journal of Hazardous Materials, 135(1–3), 311–318. https://doi.org/10.1016/j.jhazmat.2005.11.067 [Google Scholar] [Crossref]
5. Ilkhamov, M. A., Munosibov, Sh. M., Matkarimov, S. T., & Karimjonov, B. R. (2026). Kinetics and influencing factors in the carbothermic reduction process of steelmaking dust. Mining Bulletin of Uzbekistan, (1(104)), 10–14. https://doi.org/10.70769/2181-7383.MBU.1(104).2026.2 [Google Scholar] [Crossref]
6. Ilkhamov, M. A., Munosibov, Sh. M., Matkarimov, S. T., Karimjonov, B. R., & Maksudov, Sh. A. (2026). Study of the coke reduction of zinc oxide-bearing steelmaking dust [in Uzbek]. Composite Materials (Kompozitsion Materiallar), (1), 156–158. [Google Scholar] [Crossref]
7. Ilkhamov, M. A., Munosibov, Sh. M., Matkarimov, S. T., & Maksudov, Sh. A. (2026). Hydrometallurgical processing of EAF dust: Zinc extraction and recycling iron residue in steelmaking. Mining Bulletin of Uzbekistan, (1(104)), 16–20. https://doi.org/10.70769/2181-7383.MBU.1(104).2026.3 [Google Scholar] [Crossref]
8. Kukurugya, F., Vindt, T., & Havlík, T. (2015). Behavior of zinc, iron and calcium from electric arc furnace (EAF) dust in hydrometallurgical processing in sulfuric acid solutions: Thermodynamic and kinetic aspects. Hydrometallurgy, 154, 20–32. https://doi.org/10.1016/j.hydromet.2015.03.008 [Google Scholar] [Crossref]
9. Levenspiel, O. (1999). Chemical reaction engineering (3rd ed.). John Wiley & Sons. [Google Scholar] [Crossref]
10. Lin, X., Peng, Z., Yan, J., Li, Z., Hwang, J.-Y., Zhang, Y., Li, G., & Jiang, T. (2017). Pyrometallurgical recycling of electric arc furnace dust. Journal of Cleaner Production, 149, 1079–1100. https://doi.org/10.1016/j.jclepro.2017.02.128 [Google Scholar] [Crossref]
11. Munosibov, Sh. M., Ilkhamov, M. A., Matkarimov, S. T., Karimjonov, B. R., & Maksudov, Sh. A. (2026a). Hydrogen-based reduction technology of iron-bearing compounds in electric arc furnace dust. Science and Innovative Development, 9(2), 113–122. https://doi.org/10.36522/2181-4317/9-2-2026-9 [Google Scholar] [Crossref]
12. Munosibov, Sh. M., Ilkhamov, M. A., Matkarimov, S. T., Karimjonov, B. R., & Maksudov, Sh. A. (2026b). Studies on the reductive roasting of zinc- and iron-containing steelmaking dust [in Russian]. Mining Machines and Technology, (1(15)), 26–32. https://doi.org/10.5281/zenodo.20279864 [Google Scholar] [Crossref]
13. Munosibov, Sh. M., Ilkhamov, M. A., Matkarimov, S. T., Karimjonov, B. R., & Maksudov, Sh. A. (2026c). Study of the hydrogen reduction of iron-based compounds in steelmaking dust [in Uzbek]. Composite Materials (Kompozitsion Materiallar), (1), 129–131. [Google Scholar] [Crossref]
14. Oustadakis, P., Tsakiridis, P. E., Katsiapi, A., & Agatzini-Leonardou, S. (2010). Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD). Part I: Characterization and leaching by diluted sulphuric acid. Journal of Hazardous Materials, 179(1–3), 1–7. https://doi.org/10.1016/j.jhazmat.2010.01.059 [Google Scholar] [Crossref]
15. Spreitzer, D., & Schenk, J. (2019). Reduction of iron oxides with hydrogen—A review. Steel Research International, 90(10), 1900108. https://doi.org/10.1002/srin.201900108 [Google Scholar] [Crossref]
16. Suetens, T., Guo, M., Van Acker, K., & Blanpain, B. (2015). Formation of the ZnFe2O4 phase in an electric arc furnace off-gas treatment system. Journal of Hazardous Materials, 287, 180–187. https://doi.org/10.1016/j.jhazmat.2015.01.050 [Google Scholar] [Crossref]
17. Turkdogan, E. T. (1980). Physical chemistry of high temperature technology. Academic Press. [Google Scholar] [Crossref]
18. Turkdogan, E. T., & Vinters, J. V. (1971). Gaseous reduction of iron oxides: Part I. Reduction of hematite in hydrogen. Metallurgical Transactions, 2(11), 3175–3188. https://doi.org/10.1007/BF02814970 [Google Scholar] [Crossref]
19. Vogl, V., Åhman, M., & Nilsson, L. J. (2018). Assessment of hydrogen direct reduction for fossil-free steelmaking. Journal of Cleaner Production, 203, 736–745. https://doi.org/10.1016/j.jclepro.2018.08.279 [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- The Impact Of UI/UX Design on User Trust and Task Completion in Civic Tech Platforms
- Solar Cell Photovoltaic Model Shell Sp 75
- Development of an Intelligent Traffic Management System to Address Visibility Obstruction at Urban Intersections: A Case Study of Ibadan Metropolis
- Optimum Placement of Facts Devices on an Interconnected Power Systems Using Particle Swarm Optimisation Technique
- Assessing Construction Transformation and Implication on Future Production Flow System