A Complete Review of Ultrasonic Metal Welding, Ultrasonic Consolidation, and Additive Manufacturing Techniques

For joining standardized metals and alloys, conventional fusion-based welding methods like electron beam welding (EBW), laser beam welding (LBW), friction stir spot welding (FSSW), and resistance spot welding (RSW) are frequently employed. Nevertheless, these procedures frequently experience uneven weld quality, thermal distortion, and metallurgical degradation because of high processing temperatures. Solid-state joining technologies, especially ultrasonic consolidation (UC) and ultrasonic additive manufacturing (UAM), have been developed as a result of these constraints. In order to create metallurgical bonds between metallic or non-metallic foils at almost room temperature, UC/UAM uses high-frequency ultrasonic vibrations under moderate normal pressure. This allows for the creation of low-temperature, multi-layered solid structures without melting the base materials.

Welding of Ultrasonic Metal, Electro Discharge, Consolidation of Ultrasonic

1. Seungmin Shin, Angwoo Nam, Jiyoung Yu, Iyong Park, Dongcheol Kim, “Ultrasonic Metal Welding of Multilayered Copper Foils to Nickel-Plated Copper Sheet in Lithium-Ion Battery Cell”, Metal, 2021,11,95, https://www.mdpi.com/2075-4701/11/8/1195. [Google Scholar] [Crossref]

2. S. Shawn Lee, Wayne Cai, “Analysis of Weld Formation in Multilayer Ultrasonic Metal Welding Using High-Speed Images,” Journal of Manufacturing Science and Engineering, June 2015, https://doi.org/10.1115/1.4029787. [Google Scholar] [Crossref]

3. S. Kumar, “Development of Functionally Graded Materials by Ultrasonic Consolidation,” CIRP Journal of Manufacturing Science and Technology, Vol. 3, Issue 1, 2010, pp. 85–87, https://www.mdpi.com/2075-4701/9/5/505. [Google Scholar] [Crossref]

4. Guntram Wagner, Dietmar Eifler, Frank Balle, “Ultrasonic Welding of Hybrid Joints,” JOM, Vol. 64, No. 3, 2012. [Google Scholar] [Crossref]

5. Kaifeng Wang, Zijao Zhang, Jingjing Li, Qian Yu, Wayne Cai, “Investigation of Interfacial Layer for Ultrasonic Spot Welded Aluminum to Copper Joints,” October 2017. [Google Scholar] [Crossref]

6. T. H. Kim, J. P. Spicer, J. A. Abell, J. Yum, S. J. Hu, “Process Robustness of Single Lap Ultrasonic Welding of Thin, Dissimilar Materials,” CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, 2011, pp. 17–20. [Google Scholar] [Crossref]

7. Satyam Tiwari, Mohd Saif, “Optimization of Wire Cut EDM of Aluminum Alloy 6061 Using Taguchi's Approach for Maximizing MRR,” August 2020. [Google Scholar] [Crossref]

8. A. Elanthiraiyan, S. Ashok Kumar, S. Sathiyaraj, G. Antony Casmir Jayaseelan, “Investigation of Machining Characteristics of Aluminum 8011 by Wire Cut EDM Process”, AI-Khwarizmi Engineering Journal, ISSN: 1818-1171, E-ISSN: 2312-0789. [Google Scholar] [Crossref]

9. R. A. Harris, R. J. Friel, “Ultrasonic Additive Manufacturing: A Hybrid Production Process for Novel Functional Products,” The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM), 2013, pp. 35–40. [Google Scholar] [Crossref]

10. Alkaios Bournais Varotsis, Daniel S. Engstom, Ross J. Friel, Russell A. Harris, “Ultrasonic Additive Manufacturing as a Form-Then-Bond Process for Embedding Electronic Circuitry into a Metal Matrix,” Journal of Manufacturing Processes, Vol. 32, 2018, pp. 664–675. [Google Scholar] [Crossref]

11. G. D. Janaki Ram, Y. Yang, B. E. Stucker, “Effect of Process Parameters on Bond Formation During Ultrasonic Consolidation of Aluminum Alloy 3003”, Journal of Manufacturing Systems Volume 25, Issue 3, 2006, Pages 221-238 [Google Scholar] [Crossref]

12. G. D. Janaki Ram, Y. Yang, B. E. Stucker, C. Robinson, “Use of Ultrasonic Consolidation for Fabrication of Multi-Material Structures”, Rapid Prototyping Journal, Vol. 13/4, 2007, pp. 226– 235. [Google Scholar] [Crossref]

13. Irfan Kaya, Omer Necati Cora, Dogan Acar, Muammer Koc, “On the Formability of Ultrasonic Additive Manufactured Al–Ti Laminated Composites”, Metallurgical and Materials Transactions A, 03 July, 2018, Volume 49. [Google Scholar] [Crossref]

14. P. J. Wolcott, A. Hehr, M. J. Dapino, C. Pawlowski, “Process Improvements and Characterization of Ultrasonic Additive Manufactured Structures,” Journal of Materials Processing Technology, Vol. 233, 2016, pp. 44–52. [Google Scholar] [Crossref]

15. C. Y. Kong, R. C. Soar, P. M. Dickens, “An Investigation of the Control Parameters for Aluminum 3003 under Ultrasonic Consolidation”, The University of Texas at Ausin, 2002. [Google Scholar] [Crossref]

16. Gowtham Venkatraman, Adam Hehr, Leon M. Headings, Marcelo J. Dapino, “Effect of System Compliance on Weld Power in Ultrasonic Additive Manufacturing”, Rapid Prototyping Journal © Emerald Publishing Limited [ISSN 1355-2546] [DOI 10.1108/RPJ-07-2020-0168] [Google Scholar] [Crossref]

17. Thongchai Arunchai, Phisut Apichayakul, Kreangsak Tamee, Kawin Sonthipermpoon, “Resistance Spot Welding Optimization Based on Artificial Neural Network”, International Journal of Manufacturing Engineering, 09 November 2014. [Google Scholar] [Crossref]

18. Samah Sabah Barrak, Abbas Khammass Hussein, Sabah Khammass Hussein, Mohammed Helan Sar, Mursal Luaibi Saad, “Using Brass Foil Interlayer to Improve the Resistance Spot Welding AA5451 with Applied Taguchi Method,” Journal of Mechanical Engineering Research & Developments (JMERD), Vol. 42, Issue 3, 2019, pp. 120–124. [Google Scholar] [Crossref]

19. S. Hollatz, A. Olowinsky, A. Gillner, P. Heinen, E. Limpert, “Overlap Joining of Aluminum and Copper Using Laser Micro Welding with Spatial Power Modulation”, Welding in the Word, Volume 64, 28 January 2010. [Google Scholar] [Crossref]

20. Sooriyamoorthy Elangovan, V. Jaiganesh, K. Prakasan, “Optimization of Ultrasonic Welding Parameters for Copper to Copper Joints Using Design of Experiments”, International Journal of Manufacturing Engineering, 2014. [Google Scholar] [Crossref]

• An Adaptive Joint Filtering Approach to Wireless Relay Network for Transmission Rate Maximization
• IoT-Integrated Mercury Substance Detection System for Cosmetic Product Safety
• Design and Implementation of Solar PV-Based Railway Microgrid for Linke Hofmann Busch Coaches
• Cost Control Techniques on Civil Engineering Projects in Oyo State, Nigeria
• Strength and Predictive Modeling of Corn Cob Ash Blended Concrete Using Multi-Output Artificial Neural Network Approach