A Review on Automatic Solar Grass Cutter with Multifunctional Abilities

Authors

Dr. Jayshri Satre

Prof, Department of Electrical Engineering, Trinity College of Engineering and Research, Pune-411048 (India)

Prashant Mote

Students Department of Electrical Engineering, Trinity College of Engineering and Research, Pune-411048. (India)

Sakshi Dhavale

Students Department of Electrical Engineering, Trinity College of Engineering and Research, Pune-411048. (India)

Yukta Sawant

Students Department of Electrical Engineering, Trinity College of Engineering and Research, Pune-411048. (India)

Mayur Pandharpurkar

Students Department of Electrical Engineering, Trinity College of Engineering and Research, Pune-411048. (India)

Article Information

DOI: 10.51244/IJRSI.2026.1305000207

Subject Category: Electronics engineering and advanced control theory

Volume/Issue: 13/5 | Page No: 2264-2274

Publication Timeline

Submitted: 2026-05-25

Accepted: 2026-05-28

Published: 2026-06-10

Abstract

It is essential to switch from traditional, manually operated, fossil fuel-based grass cutters to solar-powered automated systems in order to minimize human labour, lower operating costs, and reduce environmental pollution. These systems make use of a solar panel to effectively charge an on-board battery, creating a continuous, low-maintenance, renewable power source that is essential for resolving problems like power outages and the environmental effects of non-renewable sources. Automation is accomplished through a range of technologies, including microcontrollers (like the AT mega 16), IR proximity sensors for object avoidance and safety, and high-efficiency motors like BLDC motors with gear systems for precise speed control and power consumption management. Control flexibility is ensured by interfaces such as Bluetooth modules, which allow for both automated and manual operation. Building on this basis, the technology's versatility will determine its future .capabilities, transforming the solar grass cutter into an all- purpose agricultural robot capable of carrying out tasks other than mowing, such as light debris collection, automated seeding and fertilization, and real-time lawn health monitoring via integrated sensors. This would offer a value-added, independent solution for comprehensive property management.

Keywords

Battery, BLDC Motor, Microcontroller, IR Proximity Sensor, Bluetooth Module

Downloads

References

1. [1] Sanyal, S., and S. R. Chowdhury (2018). creation of a micro-controller-based smart solar charge controller for energy-efficient charging. 194–198, International Conference on Computing, Power, and Communication Technologies (ICCPCT). 1. M. Karthick and associates (2020). A solar-powered lawnmower with a battery monitoring system was designed and put into operation. Journal of Physics: Conference Series, 1716(1), 012019. [Google Scholar] [Crossref]

2. [2] G. Hassan and associates (2019). Solar-Powered Battery Charging System Modeling and Performance Analysis for Self- Driving EVs. 10(2), 793-801, International Journal of Power Electronics and Drive Systems (IJPEDS). [Google Scholar] [Crossref]

3. [3] Bhargav and colleagues (2021). A thorough analysis of various MPPT methods for solar photovoltaic systems. ICACCI, the International Conference on Advances in Computing, Communications, and Informatics, 1–7. II. Self- governing Navigation and Robotics . [Google Scholar] [Crossref]

4. [4] Everett, H. R., Borenstein, J., and Feng, L. (1996). What location am I? Mobile Robot Positioning Sensors and Techniques. Michigan University. (Classic reference on navigation methods). [Google Scholar] [Crossref]

5. [5] Ulrich, I., and Borenstein, J. (2000). VFH*: Fast mobile robots with real-time obstacle avoidance. 1558–1563 in IEEE International Conference on Robotics and Automation (ICRA), 2(2). (See Vector Field Histogram-based Obstacle Avoidance Reference). [Google Scholar] [Crossref]

6. [6] Zou and colleagues (2022). An overview of algorithms for autonomous robot path planning. Systems, Man, and Cybernetics: IEEE Transactions on Systems, 52(1), 173-187. [Google Scholar] [Crossref]

7. [7] Rösmann and colleagues (2017). Using a time- elastic band, autonomous robots can navigate flexibly while avoiding obstacles. ICRA, International Conference on Robotics and Automation, 5956-5962. III. Application-Specific Systems & Autonomous Lawn Mowers. [Google Scholar] [Crossref]

8. [8] Jain and colleagues (2019). Robotic Solar-Powered Grass Cutter and Sprayer. International Journal of Engineering, Science, and Management Research, 2(5), 23-28. (Directly addresses multifunctionality). [Google Scholar] [Crossref]

9. [9] I. F. Akyildiz et al. (2020). A review of current trends and challenges in wireless sensor networks for precision agriculture. IEEE Communications Surveys & Tutorials, 22(4), 2200-2228. (Context for intelligent seeding and spraying). [Google Scholar] [Crossref]

10. [10] Reddy, B. V. R., and G. K. Rao (2018). The design and construction of an automatic grass cutter that runs on solar power. Journal of Scientific and Engineering Research International, 9(4), 98-102. [Google Scholar] [Crossref]

11. [11] A. Mali and associates (2023). creation of an intelligent, self-governing lawnmower with obstacle detection and Bluetooth control. IRJET, International Research Journal of Engineering and Technology, 10(2), 481-486. [Google Scholar] [Crossref]

12. [12] Khodke, K. R., Kukreja, H., Kotekar, S., kukade, N., & Shende, C. J. (2018). "Literature Review of Grass Cutter Machine." International Journal of Emerging Technologies in Engineering Research (IJETER), 6(2), febuary . [Google Scholar] [Crossref]

13. [13] Ismail, F. B., Al-Muhsen, N. F. O., Fuzi, F. A., & Zukipli, A. (2019). "Design and Development of Smart Solar Grass Cutter." International Journal of Engineering and Advanced Technology (IJEAT), 9(2), December. [Google Scholar] [Crossref]

14. [14] Sivarao, T. J. S. A., Hambali, M., & Faizul. (n.d.). "Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter." International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 10(04). [Google Scholar] [Crossref]

15. [15] Baingane, T., Nagrale, S., Gumgaonkar, S., Langade, G., Ramteke, S., & Dhumal, P. V. M. (2018). "Review on Fully Automated Solar Grass Cutter." International Research Journal of Engineering and Technology (IRJET), 5(02), February. [Google Scholar] [Crossref]

16. [16] Kalaskar, M., Adhau, V., Tanpure, Y., Thakare, G., Chavan, J., & Mohod, T. (2022). "Review Paper on Agricultural Solar Grass Cutter." International Journal For Research in Applied Science and Engineering Technology (IJRASET), 10(III), March. [Google Scholar] [Crossref]

17. [17] Bhalodi, T., Bhujbal, N., Doshi, K., Goregaonkar, R., & Jagtap, S. (2020). "Environmental Friendly Solar Grass Cutter." International Journal of Research in Engineering, Science and Management (IJRESM), 3(7), July. [Google Scholar] [Crossref]

18. [18] Bhandare, V., Shivani, L., Deshmane Kalyani, Khade Shruchi, Gurav Pranav, & Chinta Shrikant. (2018). "Automated Solar Grass Cutter: An Overview." International Journal for Research in Applied Science & Engineering Technology (IJRASET), 6(II), February. [Google Scholar] [Crossref]

19. [19] ― Solar Grass Cutting Robot‖ IJIRT,Volume 8 Issue 1 , June 2021, ISSN: 2349- 6002 Yash Adhao¹, Hrushikesh Sawale², Aishwarya Zope³, Prof. Dipali Dhake [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles