Economic Analysis of Radial Distribution System with Optimally Placed Distributed Generations Using Metaheuristic Optimization Techniques
Authors
M. Tech Scholar in Power Systems Engineering, Department of Electrical and Electronics Engineering, S.D.M. College of Engineering and Technology (SDMCET), Dharwad, Karnataka (India)
S.D.M. College of Engineering and Technology, Department of Electrical and Electronics Engineering, Dharwad, Karnataka (India)
S.D.M. College of Engineering and Technology, Department of Electrical and Electronics Engineering, Dharwad, Karnataka (India)
S.D.M. College of Engineering and Technology, Department of Electrical and Electronics Engineering, Dharwad, Karnataka (India)
Article Information
DOI: 10.51244/IJRSI.2026.1305000266
Subject Category: Engineering & Technology
Volume/Issue: 13/5 | Page No: 3058-3070
Publication Timeline
Submitted: 2026-05-18
Accepted: 2026-05-23
Published: 2026-06-13
Abstract
Distributed Generation (DG) integration plays a significant role in enhancing the efficiency and reliability of modern Radial Distribution Systems (RDS) such as the IEEE 69-bus network. However, improper placement and sizing of DG units, voltage instability, increased power losses, and lack of coordinated economic analysis vary under load condition remain key limitations in existing approaches. To overcome these challenges, this study proposes an integrated optimization framework for optimal DG placement and sizing using advanced metaheuristic techniques. Initially, the system is analysed using the Backward/Forward Sweep Load Flow (BFSLF) method, followed by a 24-hour load variation analysis to capture realistic demand patterns. The Animated Oat Optimization Algorithm (AOOA) is employed to determine the optimal DG location, while the Plant Rhizome Optimization Algorithm (PROA) is used to obtain the optimal DG size. The proposed model significantly enhances system performance by reducing active power losses from 224.91 kW to 97.59 kW and improving the minimum voltage from 0.9092 p.u. to 0.9567 p.u. In addition, the convergence characteristics indicate fast and stable optimization behaviour with effective exploration and exploitation capability. Finally, the economic evaluation shows that the annual cost is reduced from 11.82 million Rs to 3.13 million Rs (Rs 6/kWh) and from 13.79 million Rs to 3.65 million Rs (Rs 7/kWh), with savings up to 10.14 million Rs and net profit reaching 24.60 million Rs, demonstrating strong economic feasibility.
Keywords
Backward Forward Sweep Load Flow method, Distributed Generation, IEEE 69-bus distribution system, Load flow analysis
Downloads
References
1. Roy, S. and Singh, R., 2025. Distributed energy procurement with renewable energy sources in a radial distribution system. Computers and Electrical Engineering, 123, p.110268. [Google Scholar] [Crossref]
2. Šehić, F., Konjić, T., Ćalasan, M. and Rakočević, S., 2025. A new approach for optimal allocation and sizing a distributive energy source or a parallel compensation device in radial distribution networks. Electrical Engineering, 107(6), pp.8171-8188. [Google Scholar] [Crossref]
3. Abera, A.G., Yetayew, T.T. and Alyu, A.B., 2025. Optimized solar PV integration for voltage enhancement and loss reduction in the Kombolcha distribution system using hybrid grey wolf-particle swarm optimization. Results in Engineering, 26, p.105484. [Google Scholar] [Crossref]
4. Sahay, S., Biswal, S.R., Shankar, G., Jha, A.V., Appasani, B., Srinivasulu, A. and Nsengiyumva, P., 2025. Optimized placement of distributed generators, capacitors, and EV charging stations in reconfigured radial distribution networks using enhanced artificial hummingbird algorithm. Scientific Reports, 15(1), p.11144. [Google Scholar] [Crossref]
5. Maurya, P., Tiwari, P. and Pratap, A., 2025. Application of the hippopotamus optimization algorithm for distribution network reconfiguration with distributed generation considering different load models for enhancement of power system performance. Electrical Engineering, 107(4), pp.3909-3946. [Google Scholar] [Crossref]
6. Soliman, I.A., Tulsky, V., Abd el-Ghany, H.A. and ElGebaly, A.E., 2025. Efficient allocation of capacitors and vehicle-to-grid integration with electric vehicle charging stations in radial distribution networks. Applied Energy, 377, p.124745. [Google Scholar] [Crossref]
7. Shams, H., Rostami, N. and Mohammadi Ivatloo, B., 2025. A clustering-based co-allocation of battery swapping stations and wind-photovoltaic plants in radial distribution systems. Scientific Reports, 15(1), p.22486. [Google Scholar] [Crossref]
8. Debbarman, S., Namrata, K., Samadhiya, A., Azar, A.T., Ahmed, S., Mahlous, A.R. and El-Shafai, W., 2025. Modified cheetah optimizer for optimal techno-economic placement of distributed energy source planning. Discover Sustainability, 6(1), p.1120. [Google Scholar] [Crossref]
9. Patel, P., Patil, N., Mohsen, A., Kashyap, A., Hasan, N.A., Thatoi, D.N. and Gupta, D., 2025. Multi-objective particle swarm optimization algorithm-based method for optimal placement and sizing of distributed generations and shunt capacitors in a radial distribution network. Results in Engineering, p.106514. [Google Scholar] [Crossref]
10. Kien, L.C., Van Hien, T., Ngoc Tram, H.D. and Pham, T.D., 2025. Optimal Integration of Renewable Energy–Based Distributed Generation Units in Radial Distribution System. International Transactions on Electrical Energy Systems, 2025(1), p.8694811. [Google Scholar] [Crossref]
11. Roy, K., Bansal, S.K. and Bansal, R.C., 2025. Performance enhancement of radial distribution system with optimal DG allocation. International Journal of Modelling and Simulation, 45(1), pp.245-263. [Google Scholar] [Crossref]
12. Maurya, P., Tiwari, P. and Pratap, A., 2025. Puma optimizer technique for optimal planning of different types of distributed generation units in radial distribution network considering different load models. Electrical Engineering, 107(3), pp.2777-2828. [Google Scholar] [Crossref]
13. Mokred, S., Wang, Y., Alruwaili, M. and Ibrahim, M.A., 2025. A novel approach for voltage stability assessment and optimal siting and sizing of DGs in radial power distribution networks. Processes, 13(7), p.2239. [Google Scholar] [Crossref]
14. Fang, B., Zhao, C. and Low, S.H., 2025. Convergence of backward/forward sweep for power flow solution in radial networks. IEEE Transactions on Control of Network Systems, 12(2), pp.1780-1792. [Google Scholar] [Crossref]
15. Wang, R.B., Hu, R.B., Geng, F.D., Xu, L., Chu, S.C., Pan, J.S., Meng, Z.Y. and Mirjalili, S., 2025. The Animated Oat Optimization Algorithm: A nature-inspired metaheuristic for engineering optimization and a case study on Wireless Sensor Networks. Knowledge-Based Systems, 318, p.113589. [Google Scholar] [Crossref]
16. Zhang, J., Yan, F. and Yang, J., 2025. Binary plant rhizome growth-based optimization algorithm: An efficient high-dimensional feature selection approach. Journal of Big Data, 12(1), p.13. [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- The Impact Of UI/UX Design on User Trust and Task Completion in Civic Tech Platforms
- Solar Cell Photovoltaic Model Shell Sp 75
- Development of an Intelligent Traffic Management System to Address Visibility Obstruction at Urban Intersections: A Case Study of Ibadan Metropolis
- Optimum Placement of Facts Devices on an Interconnected Power Systems Using Particle Swarm Optimisation Technique
- Assessing Construction Transformation and Implication on Future Production Flow System