Mechatronics of Energy: Development and Performance of an Automated, Foldable Dual-Axis Solar Tracking System for Enhanced Photovoltaic Back-Up Power

The growing demand for reliable and sustainable energy sources has intensified the need to optimized photovoltaic systems, particularly for device back-up power applications. Standard fixed solar panels are bounded by their inability to continuously align with the sun, causing reduced energy capture over the course of the day. To address this limitation, this study presents the development of an automated, foldable dual-axis solar tracking system using an approach utilizing mechatronics principles to enhance photovoltaic energy yield.
The primary objective of this research is to design, develop, and evaluate a compact and portable solar tracking system endowed with the ability to automatically adjust its orientation along both azimuth and elevation axes. The system incorporates light-dependent resistors (LDRs) for solar position detection, a microcontroller-based control unit for decision-making, and 180° servo motors for precise angle mechanical movement. A foldable structural design is integrated to improve portability, ease of storage, and protection of components during non-operation.
An experimental method was utilized, pertaining to system fabrication, programming, and performance testing under field conditions. Core performance parameters, including voltage, current, and power output were analyzed and compared relative to a fixed solar panel setup operating under similar environmental conditions. The results demonstrate that the outlined dual-axis solar tracking system produces a significantly higher energy output than the fixed panel, demonstrating its effectiveness in optimizing solar energy collection.
To conclude, the constructed automated foldable dual-axis solar tracking system effectively improves photovoltaic performance and offers a practical solution for small-scale device back-up power applications. The integration of automation, portability, and efficient energy harvesting highlights the potential of mechatronics in advancing renewable energy technologies.

Solar tracking system, dual-axis solar tracker, mechatronics

1. Corti, A. (2004). Thermoeconomic evaluation of CO₂ alkali absorption system applied to semi-closed gas turbine combined cycle. Energy, 29(3), 415–426. https://doi.org/10.1016/S0360-5442(03)00257-3 [Google Scholar] [Crossref]

2. Jaafar, S. S., Maarof, H. A., Hamasalh, H. B., & Ahmed, K. M. (2024). Comparative performance evaluation of dual-axis solar trackers: Enhancing solar harvesting efficiency. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 15, 23–31. https://doi.org/10.55981/j.mev.2024.808 [Google Scholar] [Crossref]

3. Jumaat, S. A., Tan, A. A. A., Abdullah, M. N., Radzi, N. H., Hamdan, R., Salimin, S., & Ismail, M. N. B. (2018). Horizontal single axis solar tracker using Arduino approach. Indonesian Journal of Electrical Engineering and Computer Science, 12(2), 489–496. https://doi.org/10.11591/ijeecs.v12.i2.pp489 496 [Google Scholar] [Crossref]

4. Kushal, Y., Nithin, M., Jagadeesh, B., Vinith J. S., & Jalaluddin, M. (2023). Solar Tracking System with Dual Axis. International Journal for Research in Applied Science & Engineering Technology (IJRASET). https://doi.org/10.22214/ijraset.2023.52007 [Google Scholar] [Crossref]

5. Lee J F and Rahim N A 2013 CEAT 2013 - 2013 IEEE Conf. Clean Energy Technol 102–107 [Google Scholar] [Crossref]

6. Mahendran, M., Ong, H. L., Lee, G. C., & Thanikaikumaran, K. (2013). An experimental comparison study between single axis tracking and fixed photovoltaic solar panel efficiency and power output: Case study in East Coast Malaysia. In Sustainable Development Conference 2013 (Bangkok, Thailand). Retrieved from https://umpir.ump.edu.my/id/eprint/3797/ [Google Scholar] [Crossref]

7. Mohamad A et al. 2015 Applied Mechanics and Materials 695 753-756 [Google Scholar] [Crossref]

8. Salgado Conrado, L. (2018). A review on sun position sensors used in solar applications. Renewable and Sustainable Energy Reviews, 82, 2128–2146. https://doi.org/10.1016/j.rser.2017.08.040 [Google Scholar] [Crossref]

9. Sujatha B et al. 2018 Int J Recent Innovation Trends Computing Comm 6 (4) 16-20 [Google Scholar] [Crossref]

10. Vieira R G et al. 2016 Renew. Sustain. Energy Rev. 64 672-681 [Google Scholar] [Crossref]

• An Adaptive Joint Filtering Approach to Wireless Relay Network for Transmission Rate Maximization
• IoT-Integrated Mercury Substance Detection System for Cosmetic Product Safety
• Design and Implementation of Solar PV-Based Railway Microgrid for Linke Hofmann Busch Coaches
• Cost Control Techniques on Civil Engineering Projects in Oyo State, Nigeria
• Strength and Predictive Modeling of Corn Cob Ash Blended Concrete Using Multi-Output Artificial Neural Network Approach