Mineralogical and Chemical Characterization of Gidan Waya Tin Ore: Implications for Efficient Beneficiation and Tin Extraction Methods
Authors
Department of Materials and Metallurgical Engineering, Federal University of Technology Minna, Niger State (Nigeria)
Department of Mineral Petroleum Resources Engineering Kaduna Polytechnic, Kaduna (Nigeria)
Department of Mineral Petroleum Resources Engineering Kaduna Polytechnic, Kaduna (Nigeria)
Department of Mechanical Engineering Federal University of Technology Minna, Niger State (Nigeria)
Article Information
DOI: 10.51244/IJRSI.2026.1303000133
Subject Category: Tin Extraction
Volume/Issue: 13/3 | Page No: 1557-1560
Publication Timeline
Submitted: 2026-03-22
Accepted: 2026-03-27
Published: 2026-04-08
Abstract
This study investigates the characterization and beneficiation of Gidan Waya tin ore, focusing on its mineralogical and chemical composition to optimize gravity concentration processing. X-ray fluorescence (XRF) analysis revealed that tin (Sn) is the dominant element in the ore, accounting for 37.85%, followed by silicon (Si) at 11.18%, and iron (Fe) at 4.72%. Other elements such as niobium (Nb), titanium (Ti), and calcium (Ca) were also detected in smaller quantities. Mineralogical analysis through X-ray diffraction (XRD) confirmed that cassiterite (SnO₂) is the most abundant mineral phase, comprising 71% of the sample, with quartz (SiO₂) and archerite (NH₄) also present. The findings highlight the significance of removing gangue minerals, particularly quartz, to enhance the recovery of tin. The results suggest that Gidan Waya tin ore contains valuable trace elements and impurities that can influence the beneficiation process, underscoring the need for a tailored approach to processing. This study provides vital information for developing efficient and sustainable tin extraction methods, which could contribute to improved resource utilization and economic growth in Nigeria's mining sector.
Keywords
Tin ore characterization, Gidan Waya, X-ray fluorescence (XRF), Gravity concentration, X-ray diffraction (XRD)
Downloads
References
1. Akinola, A., Obams, A., & Ifeanyi, A. (2022). Determination of minerals of cassiterite tailings and its recycling potential using empirical method at Plateau State, Nigeria. International Journal of Advances in Scientific Research and Engineering. Retrieved from ResearchGate [Google Scholar] [Crossref]
2. Alabi, O. O., Olatunde, B. J., Ebenezer, A. O., & Elizabeth, G. Y. (2024). Investigating the gravity beneficiation consequences on Farin Lamba cassiterite towards tin oxide production. Saudi Journal of Engineering and Technology. Retrieved from saudijournals.com [Google Scholar] [Crossref]
3. Burt, R. (2019). Tin mineralogy and beneficiation (industry overview). [Google Scholar] [Crossref]
4. Burt, R. (2020). Advanced methods for tin extraction and processing. [Google Scholar] [Crossref]
5. Tin Ore Beneficiation Methods, Processes and Challenges (2024). Xinhai Mining Industry Overview. Retrieved from xinhaimining.com [Google Scholar] [Crossref]
6. Tin Ore Gravity Separation: Influencing Factors, Advantages & Disadvantages (2025). JXSC Machine. Retrieved from jxscmachine.com [Google Scholar] [Crossref]
7. Ding, H. (2018). Beneficiation of tin ores by gravity concentration techniques. Minerals Engineering, 114, 1-9. https://doi.org/10.1016/j.mineng.2017.12.001 [Google Scholar] [Crossref]
8. Falcon, P. J. (2021). Gravity separation methods in mineral processing: Challenges and advancements. Journal of Mining Science and Technology, 45(3), 289-305. https://doi.org/10.1007/s11041-020-00433-x [Google Scholar] [Crossref]
9. Jeon, H. (2018). Optimization of tin ore beneficiation for sustainable mining and processing. Journal of Sustainable Mining, 18(2), 76-89. https://doi.org/10.1016/j.jsm.2017.10.003 [Google Scholar] [Crossref]