Application of Just-In-Time, EOQ, and Kanban to Reduce Shortages and Rework in the Packaging of Fragile Merchandise

Authors

Mariana Paola Alvarez Cordova

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Alfonso Ávila Pérez Tagle

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Guadalupe Ibarra Huesca

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Lucero Hernández Otero

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Efraín Mohedano Torres

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Karen Lilian Gómez Barbosa

Instituto Tecnológico Superior del Occidente del Estado de Hidalgo (Mexico)

Article Information

DOI: 10.47772/IJRISS.2026.102500016

Subject Category: Supply Chain Management

Volume/Issue: 10/25 | Page No: 315-325

Publication Timeline

Submitted: 2026-10-26

Accepted: 2026-10-31

Published: 2026-11-16

Abstract

In manufacturing environments that handle fragile merchandise, deficiencies in the internal supply of packaging and packing materials frequently generate stockouts, waiting times, rework, and interruptions that compromise both operational efficiency and product protection. This applied quasi-experimental study aimed to reduce shortages and rework in the packaging process of fragile goods by optimizing material replenishment through the integrated application of Just-in-Time principles, Economic Order Quantity (EOQ), Reorder Point (ROP), and a visual Kanban system. A systematic literature review following the PRISMA methodology (2016–2026) identified relevant approaches combining ABC classification, inventory optimization models, and visual pull systems for packaging material supply.
The research followed a four-phase Lean-based framework: diagnosis and prioritization of shortage causes using Pareto analysis and 5 Whys; ABC classification and calculation of EOQ and ROP for priority materials; design and implementation of a physical three-color Kanban board together with an Excel consultation tool; and evaluation through pre–post comparison of fulfillment rates and request processing times, validated by a paired t-test. Results showed an improvement in the average material fulfillment rate from 89.90 % to 95.47 % (+5.57 percentage points) and a 12 % reduction in average request processing time (from 5.0 to 4.4 minutes). The hypothesis test confirmed that the difference in fulfillment rate was statistically significant. These findings demonstrate that the combined use of quantitative inventory parameters and a visual Kanban system constitutes a practical, low-cost intervention capable of stabilizing packaging material flow, reducing stockouts, and supporting continuous packing operations for fragile products without requiring complex technological investment.

Keywords

Just-in-Time, Economic Order Quantity, Reorder Point, Kanban, Lean Manufacturing, packaging materials, fragile merchandise, stockout reduction

Downloads

References

1. Aguirre Álvarez, Y. A. (2014). Análisis de las herramientas Lean Manufacturing para la eliminación de desperdicios en las Pymes [Tesis doctoral]. [Google Scholar] [Crossref]

2. Berzi, L., Cocci, M., Barbieri, R., Pierini, M., & Delogu, M. (2024). Approaching the re-design of reusable packaging from an environmental perspective: A case study in the railway sector. IOP Conference Series: Materials Science and Engineering, 1306, 012043. https://doi.org/10.1088/1757-899X/1306/1/012043 [Google Scholar] [Crossref]

3. Chávez, L. F., Manjarres, J. C., & Valbuena, S. G. (2024). Diagrama de Pareto. Perspectiva de la asignatura de control de la calidad. Boletín de Innovación, Logística y Operaciones, 6(1), 51–56. [Google Scholar] [Crossref]

4. Djaja, F. A. J., & Sutapa, I. N. (2024). Design thinking: Visual guidance for quality inspection case study on cosmetic packaging company. AIP Conference Proceedings, 2951, 020006. https://doi.org/10.1063/5.0182346 [Google Scholar] [Crossref]

5. Espinoza León, J. F., & Rojas Mallqui, F. G. (2024). Aplicación del punto de reorden optimizado y mejora de productividad en el almacén CD-Friocenter Grupo Redondos, Lima 2022. [Google Scholar] [Crossref]

6. García, L. A. M. (2023). Gestión logística integral (3.ª ed.). Ecoe Ediciones. [Google Scholar] [Crossref]

7. García-Arca, J., & Prado-Prado, J. C. (2020). Packaging design for competitiveness. Contextualizing the search and adoption of changes from a sustainable supply chain perspective. International Journal of Production Management and Engineering, 8(2), 109–121. [Google Scholar] [Crossref]

8. Hernández-Sampieri, R., Fernández Collado, C., & Baptista Lucio, P. (2014). Metodología de la investigación (6.ª ed.). McGraw-Hill Education. [Google Scholar] [Crossref]

9. Kristensen, I., & Rudresh, E. (2026). Improving inbound logistics through standardised packaging [Master’s thesis]. Chalmers University of Technology. [Google Scholar] [Crossref]

10. Lendínez, L. C. (2019). Kanban. Metodología para aumentar la eficiencia de los procesos. 3c Tecnología: Glosas de innovación aplicadas a la pyme, 8(1), 30–41. [Google Scholar] [Crossref]

11. Miro. (s.f.). ¿Qué es un diagrama de Ishikawa? https://miro.com/es/diagrama/que-es-diagrama-ishikawa/ [Google Scholar] [Crossref]

12. Mostafa, H. M. N. (2026). Developing the design thinking model in light of the Fifth Industrial Revolution and its application to smart interactive packaging design. Journal of Applied Arts. [Google Scholar] [Crossref]

13. Mousalli-Kayat, G. (2015). Métodos y diseños de investigación cuantitativa. [Google Scholar] [Crossref]

14. Murillo, J. (2011). Métodos de investigación de enfoque experimental. [Google Scholar] [Crossref]

15. Murthy, D. N. (2024). Design thinking in automotive and consumer packaging: A review. Journal of Informatics Education and Research, 4(3). https://doi.org/10.52783/jier.v4i3.1838 [Google Scholar] [Crossref]

16. Núñez, H. C. (2019). Análisis de los cuatro cuadrantes. LinkedIn. [Google Scholar] [Crossref]

17. OGPSGroup. (2026). Achieve 0.5% RMA reduction: A powerful packaging case study. https://www.ogpsgroup.com/packaging-rma-reduction/ [Google Scholar] [Crossref]

18. Ohmori, S., Huang, Q., Li, R., & Sangkhiew, N. (2026). Logistical packaging evaluation in automotive supply chains: A multicriteria decision-making approach with industry evidence. ASEAN Journal of Scientific and Technological Reports. [Google Scholar] [Crossref]

19. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., … Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 [Google Scholar] [Crossref]

20. Piñero, J. C. M., & Duarte, M. H. (2019). Modelo EOQ en sistemas de múltiples productos. Universidad Sergio Arboleda. [Google Scholar] [Crossref]

21. Ruiz, C. A. L. (2002). Sistemas Justo a Tiempo: Administrando la diferencia [Tesis]. Universidad Autónoma de Nuevo León. http://eprints.uanl.mx/1129/1/1020146960.PDF [Google Scholar] [Crossref]

22. SafetyCulture. (2022, 8 de junio). Qué es un Gemba Walk y cómo hacerlo en 4 pasos. https://safetyculture.com/es/temas/gemba-walk/ [Google Scholar] [Crossref]

23. Socconini, L. (2019). Lean manufacturing. Paso a paso. Marge books. [Google Scholar] [Crossref]

24. Toshiba Logistics. (2025). Toshiba innovates packaging for speed, cost, and sustainability [Customer story]. SOLIDWORKS. https://www.solidworks.com/customer-story/toshiba-innovates-packaging-speed-cost-and-sustainability [Google Scholar] [Crossref]

25. Torres Sierra, C. (2022). Análisis ABC y su relevancia en la gestión de inventarios: Un estudio de revisión. Análisis sistemático de literatura. [Google Scholar] [Crossref]

26. Unipart. (2025). Automotive manufacturer reduces trim part damage by 57% across North America network. https://www.unipart.com/case-study/automotive-manufacturer-reduces-trim-part-damage-by-57-percent/ [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles