Additive Manufacturing of a Monomaterial TPU Exoskeleton for Rheumatoid Arthritis: Fabrication Strategy and Preliminary Evaluation
Authors
Héctor Luis Gutiérrez Martínez
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
Enrique de Jesús Mohedano Torres
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
María Fernanda Carmona Martínez
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
Industrial Department, Instituto Tecnológico de Pachuca, Pachuca (Mexico)
Article Information
DOI: 10.47772/IJRISS.2026.102500023
Subject Category: Health Science
Volume/Issue: 10/25 | Page No: 395-407
Publication Timeline
Submitted: 2026-10-28
Accepted: 2026-11-03
Published: 2026-11-16
Abstract
[Rheumatoid arthritis (RA) progressively impairs hand mobility and limits daily activities, and commercial orthoses are often rigid, poorly fitted, or costly. Previous work proposed a customized monomaterial thermoplastic polyurethane (TPU) exoesqueleton with a functional stiffness gradient and validated its geometry computationally. However, its physical fabrication had not been reported. This study describes the additive manufacturing of that orthosis and documents the fabrication process and its outcomes. The device was printed in TPU [90A] using fused deposition modeling. Printing parameters, including nozzle temperature, speed, layer height, and region-specific infill, were defined to produce stiffer support zones and more flexible movement zones within a single material. The printed prototype was characterized by its mass, print time, material use, and dimensional deviation relative to the CAD (Solidworks) model, and it was inspected for fit, flexibility, and ease of donning and doffing. The prototype was obtained in 4 hours with a mass of 30 g, and the main printing difficulties were [stringing, jams, adhesion] and were addressed by [adjustments]. Preliminary observations indicated [fit and flexibility findings]. The prototype has not been tested with RA patients, so functional and clinical effectiveness remain unverified. These results show that a monomaterial TPU orthosis can be fabricated with accessible FDM technology and provide printing guidelines for future usability and clinical evaluation.]
Keywords
Rheumatoid arthritis, exoesqueleton, Thermoplastic polyurethane (TPU), Additive manufacturing, Monomaterial design
Downloads
References
1. [Avila Martínez, L., Mada Duarte, D. A., & Tecuanhuey Tlahuel, H. (2024). Dependencia funcional para las actividades básicas de la vida diaria y su relación con la repercusión familiar en pacientes con artritis reumatoide. Archivos en Medicina Familiar, 26(4), 185–190. https://doi.org/10.62514/amf.v26i4.67] [Google Scholar] [Crossref]
2. [Bedolla-Barajas, M., Morales-Cárdenas, A., & Robles-Vargas, C. (2019). Costos directos y indirectos asociados a la atención de pacientes con artritis reumatoide en un hospital de tercer nivel en México. Gaceta Médica de México, 155(2), 145–152. https://doi.org/10.24875/GMM.19004812] [Google Scholar] [Crossref]
3. [Bernal-González, A., Gallegos-Torres, R. M., & Peza-Cruz, G. (2020). Perfil del estilo de vida y actividad inflamatoria en personas con artritis reumatoide. Enfermería Universitaria, 17(2), 121–135. https://doi.org/10.22201/eneo.23958421e.2020.2.653] [Google Scholar] [Crossref]
4. [Bravo Cundar, B. S., Escobar Cerón, J. N., & López Chaves, J. D. (2025). Aplicación de realidad mixta para la protección articular durante el desempeño de actividades de higiene personal y aseo en personas con artritis reumatoide en etapa temprana . Repositorio Institucional de la Universidad Mariana. https://repositorio.umariana.edu.co/server/api/core/bitstreams/874e6d86-858a-4c7c-8eee-ab11ecfba9ff/content] [Google Scholar] [Crossref]
5. [Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77–101. https://doi.org/10.1191/1478088706qp063oa] [Google Scholar] [Crossref]
6. [Carrillo-Varela, J. A., & Hernáez-Hernández, J. (2023). Optimization of 3D printing parameters for thermoplastic polyurethane (TPU) structures in wearable medical devices. Journal of Manufacturing Processes, 92, 112–125. https://doi.org/10.1016/j.jmapro.2023.03.015] [Google Scholar] [Crossref]
7. [Creswell, J. W., & Creswell, J. D. (2018). Research design: Qualitative, quantitative, and mixed methods approaches (5th ed.). SAGE Publications.] [Google Scholar] [Crossref]
8. [Cuadrado Carmona, N., & Díez Buil, H. (2017). Efectividad de la fisioterapia en los síntomas a nivel de la mano en pacientes con artritis reumatoide. http://hdl.handle.net/20.500.13002/427] [Google Scholar] [Crossref]
9. [Davis, F. D. (1989). Perceived usefulness, perceived ease of use, and user acceptance of information technology. MIS Quarterly, 13(3), 319–340. https://doi.org/10.2307/249008] [Google Scholar] [Crossref]
10. [Franco-Aguirre, J. Q., & Cardona-Arias, J. (2015). Calidad de vida relacionada con la salud en personas con artritis reumatoide: Caracterización de los estudios publicados entre 2003–2013. Iatreia, 28(2), 109–119. https://doi.org/10.17533/udea.iatreia.v28n2a01] [Google Scholar] [Crossref]
11. [Franco-Aguirre, J. Q., Cardona-Tapias, A. A., & Cardona-Arias, J. A. (2015). Calidad de vida relacionada con la salud en pacientes con artritis reumatoide de Medellín-Colombia, 2014. Revista Colombiana de Reumatología, 22(3), 153–161. https://doi.org/10.1016/j.rcreu.2015.08.001] [Google Scholar] [Crossref]
12. [Fumagalli, L., Mossini, M., Nava, R., & Covarrubias, M. (2024). STRAHAND: Rehabilitation-oriented exoskeleton for the hand. Computer-Aided Design and Applications, 21(5), 834–846. https://doi.org/10.14733/cadaps.2024.834-846] [Google Scholar] [Crossref]
13. [Gamero García, D. (2018). Artritis reumatoide, epidemiología, fisiopatología, criterios diagnósticos y tratamiento. Medicina e Investigación Universidad Autónoma del Estado de México, 6(2), 47–55. https://medicinainvestigacion.uaemex.mx/article/view/19154] [Google Scholar] [Crossref]
14. [García García, S. (2024). Diseño y construcción de un prototipo de exoesqueleto para rehabilitación de mano . Repositorio Único de la Dirección General de Bibliotecas y Servicios Digitales de Información de la UNAM. https://ru.dgb.unam.mx/server/api/core/bitstreams/080b62ce-5490-440d-a59a-09cb26ddc7a0/content] [Google Scholar] [Crossref]
15. [Granados-García, V., & Ávila-Burgos, L. (2021). Retos en la provisión de tecnologías para la rehabilitación y discapacidad en el sistema de salud mexicano. Salud Pública de México, 63(3), 405–412. https://doi.org/10.21149/11832] [Google Scholar] [Crossref]
16. [Illescas Siavichay, M. J., & Morocho Guevara, K. J. (2025). Diseño e implementación de una órtesis de mano para la rehabilitación articular en personas con artritis reumatoide . Repositorio Institucional de la Universidad Politécnica Salesiana. http://dspace.ups.edu.ec/handle/123456789/29967] [Google Scholar] [Crossref]
17. [Interrante, V., Marceau, R., & Ries, B. (2021). User-centered design strategies for wearable assistive technologies. IEEE Transactions on Human-Machine Systems, 51(4), 310–321. https://doi.org/10.1109/THMS.2021.3078912] [Google Scholar] [Crossref]
18. [Kılıc, M. C., Calık, B. B., Cobankara, V., & Balkarlı, A. (2018). The relationship between hand function and activity performance in patients with rheumatoid arthritis. Eurasian Journal of Medical Investigation, 2(3), 161–167. https://doi.org/10.14744/ejmi.2018.07279] [Google Scholar] [Crossref]
19. [Lima, R. S., & Silva, D. C. (2022). Mechanical fatigue and hysteresis behavior of 3D-printed thermoplastic polyurethane under cyclic loading. Polymer Testing, 108, Article 107510. https://doi.org/10.1016/j.polymertesting.2022.107510] [Google Scholar] [Crossref]
20. [Lima dos Santos, S. P., & Cevallos Martínez, G. F. (2020). Promoting organ donation on the Twitter platform: An exploratory analysis in Ecuador. RISTI—Revista Ibérica de Sistemas e Tecnologias de Informação, (E33), 351–360. https://www.academia.edu/79540850/Promoting_organ_donation_on_the_Twitter_platform_an_exploratory_analysis_in_Ecuador] [Google Scholar] [Crossref]
21. [Mendoza-Pinto, C., Munguía-Realpozo, P., Etchegaray-Morales, I., Berra-Romani, R., Ramírez-Lara, E., Méndez-Martínez, S., Montiel-Jarquín, A. J., Medina-Valeriano, G., & Ayón-Aguilar, J. (2026). Projections of the burden of rheumatoid arthritis in Mexico from 2020–2040. Archives of Medical Research. https://www.sciencedirect.com/science/article/pii/S0188440925000906] [Google Scholar] [Crossref]
22. [Mendoza-Vázquez, G., Rocha-Muñoz, A. D., Guerra-Soto, A. J., et al. (2013). Artritis reumatoide y dislipidemias. El Residente, 8(1), 12–22. https://www.medigraphic.com/cgi-bin/new/resumenI.cgi?IDARTICULO=41888] [Google Scholar] [Crossref]
23. [Moya, R., & Magal-Royo, T. (2019). Diseño y prototipado de un dispositivo de rehabilitación para la artritis reumatoide de mano. Tsantsa. Revista de Investigaciones Artísticas, (7), 233–240. https://publicaciones.ucuenca.edu.ec/ojs/index.php/tsantsa/article/view/2934] [Google Scholar] [Crossref]
24. [Moya-Jiménez, R., & Magal-Royo, T. (2020). Digital transformation in rehabilitation engineering: Custom 3D-printed orthoses for chronic arthritic pathologies. Procedia Manufacturing, 41, 850–857. https://doi.org/10.1016/j.promfg.2019.12.073] [Google Scholar] [Crossref]
25. [Moya-Jiménez, R., Goyes-Balladares, A., Rivera-Valenzuela, M., & Magal-Royo, T. (2025). User-centered evaluation of the ARTH-Aid ExoGlove: Perspectives of patients and therapists in rheumatoid arthritis rehabilitation. Designs, 9(2), Article 42. https://doi.org/10.3390/designs9020042] [Google Scholar] [Crossref]
26. [Moya-Jiménez, R., Magal-Royo, T., & Ponce, D. (2020, 11–13 de noviembre). Tecnologías digitales innovadoras para el diseño de exoesqueletos para la mano aplicados en la rehabilitación de pacientes con artritis crónica . Congreso Internacional de Innovación, Documentación y Educación (INNODOCT 2020), Valencia, España. Editorial Universitat Politècnica de València. https://doi.org/10.4995/INN2020.2020.11866] [Google Scholar] [Crossref]
27. [Moya Jiménez, R. C. (2023). Estudio sistémico de una estructura exoesquelética para la rehabilitación de la atrofia muscular de la mano en personas con artritis reumatoide . Portal de la Investigación de la Universidad Complutense de Madrid. https://produccioncientifica.ucm.es/documentos/64a84f62258a1f326c2265a1] [Google Scholar] [Crossref]
28. [Moya Jiménez, R., Magal Royo, T., Ponce, D., Flores, M., & Caiza, M. (2020). Hand exoskeleton design for the rehabilitation of patients with rheumatoid arthritis. Springer Nature. http://www.dspace.uce.edu.ec/handle/25000/22436] [Google Scholar] [Crossref]
29. [Nazari, V., Pouladian, M., Zheng, Y.-P., & Alam, M. (2021). A compact and lightweight rehabilitative exoskeleton to restore grasping functions for people with hand paralysis. Sensors, 21(20), Article 6900. https://doi.org/10.3390/s21206900] [Google Scholar] [Crossref]
30. [Pani, D., Barabino, G., Dessì, A., Tradori, I., Piga, M., Mathieu, A., & Raffo, L. (2014). A device for local or remote monitoring of hand rehabilitation sessions for rheumatic patients. IEEE Journal of Translational Engineering in Health and Medicine, 2, Article 2100111. https://doi.org/10.1109/JTEHM.2014.2299274] [Google Scholar] [Crossref]
31. [Polygerinos, P., Correll, N., Morin, S. A., Mosadegh, B., Onal, C. D., Petersen, K., Cianchetti, M., & Whitesides, G. M. (2017). Soft robotics: Review of fluid-driven intrinsically soft devices. Advanced Engineering Materials, 19(12), Article 1700016. https://doi.org/10.1002/adem.201700016] [Google Scholar] [Crossref]
32. [Salgado-Bustamante, M., & Pérez-Rodríguez, G. (2021). Bienestar psicológico y adaptación social en adultos jóvenes diagnosticados con artritis reumatoide. Revista Mexicana de Psicología, 38(1), 45–58. https://doi.org/10.24248/rmp.v38i1.2452] [Google Scholar] [Crossref]
33. [Singh, S., Ramakrishna, S., & Singh, R. (2020). Material considerations in additive manufacturing of wearable and implantable medical devices. Acta Biomaterialia, 115, 33–50. https://doi.org/10.1016/j.actbio.2020.08.012] [Google Scholar] [Crossref]
34. [Valero-Cuevas, F. J. (2020). Fundamentals of neuromechanics and control of the human hand. Springer Nature. https://doi.org/10.1007/978-3-030-26456-7] [Google Scholar] [Crossref]
35. [Xiloyannis, M., Antico, M., Cappello, L., & Masia, L. (2022). Soft exoskeletons for the upper limb: A review of recent advances in design and control. Journal of NeuroEngineering and Rehabilitation, 19(1), Article 82. https://doi.org/10.1186/s12984-022-01058-w] [Google Scholar] [Crossref]
36. [Yang, H., Khatiwada, A. P., Curtis, J. R., Nowell, W. B., Gavigan, K., Hawkins, G., Seals, C., Rose, C. G., McCormick, N. P., & Garza, K. B. (2025). Assessing activity limitations experienced by persons with rheumatoid arthritis to inform appropriate selection of patient-reported outcomes measures: A qualitative study. Journal of Patient-Reported Outcomes, 9(1). https://doi.org/10.1186/s41687-025-00955-5] [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Measuring Waste of Patient Time in Health Care at Non-Digitized Hospital: An Observational Study in Bangabandhu Sheikh Mujib Medical University, Bangladesh
- Reaffirming Clinical Confidence in Atorvastatin Therapy: A Digital Outreach Case Study from Tamil Nadu, India
- Clinical Manifestations and Therapeutic Response in a Patient with Hypothyroidism: A Case Report
- Eranda (Ricinus Communis) In Gridhrasi (Sciatica): Classical Rationale, Pharmacology and Clinical Evidence- A Narrative Literature Review
- Magnetotherapy in Pain Management: Mechanisms, Clinical Applications, and Future Perspectives – A Review