Development of a Modular, Wheelchair-Accessible Desk Using Design Thinking and User-Centered Design (UCD).
Authors
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Article Information
DOI: 10.47772/IJRISS.2026.102500026
Subject Category: Engineering & Technology
Volume/Issue: 10/25 | Page No: 434-449
Publication Timeline
Submitted: 2026-10-28
Accepted: 2026-11-02
Published: 2026-11-16
Abstract
Conventional desks are designed around fixed dimensions and lower structural elements that can hinder frontal approach, reach, and comfortable posture for wheelchair users, limiting their participation in study and work activities. This study aimed to develop a modular and accessible desk concept for wheelchair users through Design Thinking and User-Centered Design. An applied, mixed-methods, descriptive-propositive approach was followed, structured in the five phases of Design Thinking: empathize, define, ideate, prototype, and test. In the empathize phase, a questionnaire with two five-point Likert scales (perceived difficulty and importance of desk features) was administered to ten people, six wheelchair users and four non-users, selected through non-probability sampling. Data were analyzed descriptively, and internal consistency was estimated with Cronbach’s alpha. Both scales showed high internal consistency (α = 0.955 and 0.929). The greatest difficulties were plugging in devices and maintaining posture during long periods, while height adjustment, removable storage modules, and ample work surface were the most valued features (mean = 4.20). These findings informed a design brief, a conceptual sketch, and a three-dimensional model of an L-shaped desk with adjustable height, removable storage modules, device charging, and open space for frontal approach. The project is currently at the three-dimensional modeling stage; a physical prototype has not been built, and usability, stability, and ergonomic tests with users remain pending. Because of the small sample and the preliminary nature of the instrument, the results are exploratory and support the relevance of the proposed features rather than confirming the effectiveness of the desk. Future work will build the prototype and evaluate it with a larger group of wheelchair users.
Keywords
inclusive design, wheelchair users, Design Thinking, user-centered design, modular furniture
Downloads
References
1. Changes in musculoskeletal discomfort and postural alignment according to the height of the worktable when VDT activities were performed by patients in a wheelchair with C6 and T6 spinal cord injuries. (2021). International Journal of Innovative Research in Medical Science, 6(1). [Google Scholar] [Crossref]
2. DesignWanted. (2025). Five inclusive design furniture projects. https://designwanted.com/inclusive-design-five-furniture-projects/ [Google Scholar] [Crossref]
3. Dos Santos, C. M. D., Costa Neto, P. L. O., & Santos, R. F. (2021). Ergonomic evaluation of workstation furniture for wheelchair users with reference to Brazilian standards ABNT NBR-9050 and NR-17. AHFE International. https://doi.org/10.54941/ahfe1001276 [Google Scholar] [Crossref]
4. Dynamic Worktop for highly inclusive kitchens. (s. f.). Design for All (DfA) approach to modular and adjustable worktops. [Google Scholar] [Crossref]
5. Gebesa. (2025). Inclusive offices with adaptive furniture: Complete guide. https://blog.gebesa.com [Google Scholar] [Crossref]
6. Herrera-Saray, P., Peláez-Ballestas, I., Ramos-Lira, L., Sánchez-Monroy, D., & Burgos-Vargas, R. (2013). Problemas con el uso de sillas de ruedas y otras ayudas técnicas y barreras sociales a las que se enfrentan las personas que las utilizan. Estudio cualitativo desde la perspectiva de la ergonomía en personas discapacitadas por enfermedades reumáticas y otras condiciones. Reumatología Clínica, 9(1), 24–30. https://doi.org/10.1016/j.reuma.2012.05.010 [Google Scholar] [Crossref]
7. INEGI. (2021). Censo de Población y Vivienda 2020. Instituto Nacional de Estadística y Geografía. [Google Scholar] [Crossref]
8. International Organization for Standardization. (2019). ISO 9241-210:2019 Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems. ISO. [Google Scholar] [Crossref]
9. James Dyson Award. (2026). Cara – Circular desk for people with ADHD. https://www.jamesdysonaward.org [Google Scholar] [Crossref]
10. Journal of Industrial Technology. (2025). Applying Quality Function Deployment with anthropometric to design a working bench table for persons with disabilities. The Journal of Industrial Technology. [Google Scholar] [Crossref]
11. Khursheed, S., Khalid, S., & Moeed, K. M. (2016). Ergonomic study of VDT workstation for physically disabled persons. Research Journal of Computer and Information Technology Sciences, 4(6), 24–27. [Google Scholar] [Crossref]
12. Luján, L. (s. f.). ISO 9241-210: Diseño centrado en el usuario. Aacademica.org. Recuperado el 25 de octubre de 2026, de https://www.aacademica.org/leandro.lujan/2 [Google Scholar] [Crossref]
13. Mace, R. (s. f.). Principles of Universal Design. Center for Universal Design, North Carolina State University. [Google Scholar] [Crossref]
14. Naeini, B. B., Tabatabai Ghomsheh, F., Divani, R., Danesh, M. K., & Garosi, E. (2021). Ergonomic design and evaluation of a novel laptop desk for wheelchair users. Work, 70(3), 1177–1185. https://doi.org/10.3233/WOR-205123 [Google Scholar] [Crossref]
15. Pospisilova, H. (2015). A design of a work desk for persons in a wheelchair [Tesis de maestría/doctorado, Pukyong National University]. [Google Scholar] [Crossref]
16. Race, L., Shen, T.-P., & Jensen, S. (2019). Sharifa’s workstation: Custom desk that supports limited range of motion while working and eating in bed. RESNA Student Design Challenge. [Google Scholar] [Crossref]
17. Ramos, D. G. V. (2025). Enfoque ergonómico en el diseño de oficinas para personas con movilidad reducida. Revista Social Fronteriza, 5(3). https://doi.org/10.59814/resofro.2025.5(3)766 [Google Scholar] [Crossref]
18. RESNA Student Design Challenge. (varios años). Proyectos de estaciones de trabajo y diseño colaborativo con usuarios. [Google Scholar] [Crossref]
19. Rifton. (s. f.). Adaptive Desk for special needs students. https://www.rifton.com/products/adaptive-desks [Google Scholar] [Crossref]
20. Rojas R., C. I., y García S., H. E. (2013). Diseño inclusivo: La participación activa de las personas en las soluciones de diseño. Kepes, 10(9), 297–314. https://revistasojs.ucaldas.edu.co/index.php/kepes/article/view/516 [Google Scholar] [Crossref]
21. Sarmiento, M. P. (2020). Editorial. Bitácora Urbano Territorial, 30(2), 7–10. https://doi.org/10.15446/bitacora.v30n2.86969 [Google Scholar] [Crossref]
22. Schiappa, V., et al. (2023). Functional mobility, employment and safety benefits of seat elevating devices. Assistive Technology, 35(6), 471–476. https://doi.org/10.1080/10400435.2022.2124469 [Google Scholar] [Crossref]
23. U.S. Department of Justice. (2010). 2010 ADA standards for accessible design. https://www.ada.gov/assets/pdfs/2010-design-standards.pdf [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- The Impact Of UI/UX Design on User Trust and Task Completion in Civic Tech Platforms
- Solar Cell Photovoltaic Model Shell Sp 75
- Development of an Intelligent Traffic Management System to Address Visibility Obstruction at Urban Intersections: A Case Study of Ibadan Metropolis
- Optimum Placement of Facts Devices on an Interconnected Power Systems Using Particle Swarm Optimisation Technique
- Assessing Construction Transformation and Implication on Future Production Flow System