A Markerless Augmented Reality Learning Aid for Microelectronic Fabrication

Authors

Nurul Syazwani Rohizat

Faculty of Electronics & Computer Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Haslinah Mohd Nasir

Faculty of Electronics & Computer Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Noor Mohd Ariff Brahin

Faculty of Electronics & Computer Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Suraya Zainuddin

Faculty of Electronics & Computer Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Ida Syafiza Md Isa

Faculty of Electronics & Computer Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Nurul Syuhada Mohd Shari

Faculty of Electrical Technology & Engineering, Universiti Teknikal Malaysia Melaka, Jalan Hang Tuah Jaya, Melaka, 76100, Malaysia (Malaysia)

Nur Amira Nor Arifin

Tenaga Nasional Berhad (TNB) Research Sdn Bhd, No. 1, Kawasan Institusi Penyelidikan, Jln Ayer Hitam, Kajang, Selangor, 43000 Malaysia (Malaysia)

Article Information

DOI: 10.47772/IJRISS.2026.101000746

Subject Category: Electrical and Electronics Engineering

Volume/Issue: 10/10 | Page No: 10488-10496

Publication Timeline

Submitted: 2026-10-27

Accepted: 2026-11-02

Published: 2026-11-17

Abstract

Microelectronics fabrication requires learners to connect successive processing operations with changes in semiconductor structures. Conventional learning materials can make these spatial and sequential relationships difficult to visualise. This study presents the development and preliminary user evaluation of a markerless augmented reality (AR) mobile application for learning selected microelectronics fabrication processes. Three-dimensional models were created in TinkerCAD and integrated into Unity, with C# scripts supporting scene navigation and model manipulation. The Android application combines fabrication models with explanatory text, rotation controls, and scaling functions. A descriptive questionnaire involving 18 engineering students examined perceived information delivery, usability, engagement, and understanding. All respondents agreed or slightly agreed that the application provided additional fabrication information, while 88.9% responded favourably to both ease of use and clarity of information delivery. Furthermore, 94.4% considered the application interactive and enjoyable, and 83.3% reported increased interest in fabrication processes. The proportion selecting ratings of 3–5 for self-assessed understanding increased from 77.8% before use to 100% after use. These findings suggest favourable initial user acceptance and perceived instructional value. However, the small sample, reliance on self-reported responses, and absence of an objective knowledge assessment limit conclusions about learning effectiveness. The prototype provides a foundation for further content refinement, technical testing, and controlled evaluation of AR-supported microelectronics learning.

Keywords

Augmented Reality, Microelectronics Fabrication, Markerless AR, Engineering Education, Interactive Visualisation.

Downloads

References

1. Antonioli, M., Blake, C., & Sparks, K. (2014). Augmented reality applications in education. The Journal of technology studies, 96-107. [Google Scholar] [Crossref]

2. Gao, Q. H., Wan, T. R., Tang, W., & Chen, L. (2017). A stable and accurate marker-less augmented reality registration method. 2017 International Conference on Cyberworlds (CW), [Google Scholar] [Crossref]

3. Ismail, M. E., Utami, P., Ismail, I. M., Khairudin, M., Amiruddin, M. H., Lastariwati, B., & Maneetien, N. (2018). The effect of an augmented reality teaching kit on visualization, cognitive load and teaching styles. Jurnal Pendidikan Teknologi dan Kejuruan, 24(2), 178-184. [Google Scholar] [Crossref]

4. Noh, K.-H., Jee, H.-K., & Lim, S.-H. (2010). Effect of augmented reality contents based instruction on academic achievement, interest and flow of learning. The Journal of the Korea Contents Association, 10(2), 1-13. [Google Scholar] [Crossref]

5. Pooja, J., Vinay, M., Vineetha, G. P., & Anuradha, M. (2020). Comparative analysis of marker and marker-less augmented reality in education. 2020 IEEE International Conference for Innovation in Technology (INOCON), [Google Scholar] [Crossref]

6. Silver, E. A. (2013). Using conceptual and procedural knowledge: A focus on relationships. In Conceptual and procedural knowledge (pp. 181-198). Routledge. [Google Scholar] [Crossref]

7. Singh, N., Srivastava, K., Kumar, A., Yadav, N., Yadav, A., Dubey, S., Singh, R., Gehlot, A., Verma, A. S., & Gupta, N. (2024). Challenges and opportunities in engineering next-generation 3D microelectronic devices: improved performance and higher integration density. Nanoscale advances, 6(24), 6044-6060. [Google Scholar] [Crossref]

8. Tekedere, H., & Göke, H. (2016). Examining the effectiveness of augmented reality applications in education: A meta-analysis. International Journal of Environmental and Science Education, 11(16), 9469-9481. [Google Scholar] [Crossref]

9. Turan, Z., & Atila, G. (2021). Augmented reality technology in science education for students with specific learning difficulties: Its effect on students’ learning and views. Research in Science & Technological Education, 39(4), 506-524. [Google Scholar] [Crossref]

10. Yildiz, E. P. (2022). Augmented Reality Applications in Education: Arloopa Application Example. Higher Education Studies, 12(2), 47-53. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles