A Validated Industrial Case Study Demonstrates a Practical Maintenance Intervention for Centrifugal Pump Mechanical Seals Under Supply-Chain Constraints

Mechanical seal failure is a significant cause of unplanned downtime in centrifugal pumps used in large water and process industries, particularly where reliance on imported original equipment manufacturer (OEM) spare parts results in extended procurement lead times. This paper presents an industrial case study on the emergency in-situ restoration of a damaged stationary ceramics mechanical seal face in an ultrafiltration (UF) backwash pump (Tag: 50-P-007B, capacity 1100 m³/hr) at Dangote Fertiliser Limited, Nigeria. Following seal face chipping and the unavailability of replacement components with OEM lead times of 6–18 weeks, an epoxy-based composite material (M-Seal) was used as a contingency repair. The repair methodology involved controlled surface preparation, epoxy composite application to rebuild the sealing interface, finishing to restore functional flatness, and a monitored 24-hour curing period before recommissioning. On start-up, leakage ceased completely within minutes of operation. The pump was subsequently monitored under normal UF backwash operating conditions. Field evidence confirms that the repaired seal remained in continuous service for over four years without observable leakage, abnormal wear, or performance degradation. A comparative economic assessment indicates substantial reductions in downtime duration and maintenance cost relative to OEM seal replacement. The study demonstrates that controlled epoxy-based restoration of stationary mechanical seal faces can provide a reliable and cost-effective contingency maintenance strategy for benign water-based services, enhancing equipment availability and operational resilience under supply-chain constraints.

Mechanical seal, centrifugal pump, epoxy composite, UF backwash

1. API Standard 682. Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps. American Petroleum Institute, Washington, DC. [Google Scholar] [Crossref]

2. ISO 21049. Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps. International Organization for Standardization, Geneva. [Google Scholar] [Crossref]

3. ISO 5199. Technical Specifications for Centrifugal Pumps—Class II. International Organization for Standardization, Geneva. [Google Scholar] [Crossref]

4. Wilo Mather & Platt Pumps Pvt. Ltd. Mechanical Datasheet for UF Backwash Pump 50-P-007 A/B/C. Project Documentation, Dangote Fertiliser Limited. [Google Scholar] [Crossref]

5. Bloch, H. P., & Geitner, F. K. Practical Machinery Management for Process Plants, Volume 1: Improving Machinery Reliability. Elsevier, 2012. [Google Scholar] [Crossref]

6. Bloch, H. P. Pump User’s Handbook: Life Extension. Fairmont Press, 2014. [Google Scholar] [Crossref]

7. Neale, M. J. The Tribology Handbook. Butterworth-Heinemann, 1995. [Google Scholar] [Crossref]

8. Smith, R., & Mobley, R. K. Rules of Thumb for Maintenance and Reliability Engineers. Butterworth-Heinemann, 2008. [Google Scholar] [Crossref]

9. Mobley, R. K. An Introduction to Predictive Maintenance. Elsevier, 2002. [Google Scholar] [Crossref]

10. Budris, A. R. “Mechanical Seal Reliability Improvement in Process Pumps.” Hydrocarbon Processing, vol. 89, no. 4, 2010, pp. 65–72. [Google Scholar] [Crossref]

11. Nelson, W. E. Pump Reliability and Maintenance. McGraw-Hill, 2007. [Google Scholar] [Crossref]

12. Karassik, I. J., et al. Pump Handbook. 4th ed., McGraw-Hill, 2008. [Google Scholar] [Crossref]

13. Juvinall, R. C., & Marshek, K. M. Fundamentals of Machine Component Design. Wiley, 2011. [Google Scholar] [Crossref]

14. Tavner, P., et al. Condition Monitoring of Rotating Electrical Machines. IET, 2008. [Google Scholar] [Crossref]

15. Rausand, M., & Hoyland, A. System Reliability Theory: Models, Statistical Methods, and Applications. Wiley, 2004. [Google Scholar] [Crossref]

16. Moubray, J. Reliability-Centered Maintenance. 2nd ed., Industrial Press, 1997. [Google Scholar] [Crossref]

17. Wang, H., et al. “Failure Analysis of Mechanical Seals in Centrifugal Pumps.” Engineering Failure Analysis, vol. 18, no. 5, 2011, pp. 1441–1449. [Google Scholar] [Crossref]

18. Bai, Q., et al. “Tribological Performance of Mechanical Seal Face Materials in Aqueous Media.” Wear, vol. 271, 2011, pp. 234–241. [Google Scholar] [Crossref]

19. Khonsari, M. M., & Booser, E. R. Applied Tribology: Bearing Design and Lubrication. Wiley, 2017. [Google Scholar] [Crossref]

20. Davis, J. R. Surface Engineering for Corrosion and Wear Resistance. ASM International, 2001. [Google Scholar] [Crossref]

21. Mang, T., et al. Lubricants and Lubrication. Wiley-VCH, 2017. [Google Scholar] [Crossref]

22. Budinski, K. G., & Budinski, M. K. Engineering Materials: Properties and Selection. 9th ed., Pearson, 2010. [Google Scholar] [Crossref]

23. Callister, W. D., & Rethwisch, D. G. Materials Science and Engineering: An Introduction. Wiley, 2018. [Google Scholar] [Crossref]

24. Jones, R. Mechanics of Composite Materials. Taylor & Francis, 1999. [Google Scholar] [Crossref]

25. Petrie, E. M. Epoxy Adhesive Formulations. McGraw-Hill, 2006. [Google Scholar] [Crossref]

26. ASM Handbook, Volume 21. Composites. ASM International, 2001. [Google Scholar] [Crossref]

27. ASTM D695. Standard Test Method for Compressive Properties of Rigid Plastics. ASTM International. [Google Scholar] [Crossref]

28. Smith, A. M. “Emergency Repairs Using Polymer Composites in Process Plants.” Maintenance Technology, vol. 22, no. 6, 2009. [Google Scholar] [Crossref]

29. Zaki, M., et al. “Maintenance Strategies for Critical Pumps in Water Treatment Plants.” Journal of Water Process Engineering, vol. 31, 2019. [Google Scholar] [Crossref]

30. Dhillon, B. S. Engineering Maintenance: A Modern Approach. CRC Press, 2002. [Google Scholar] [Crossref]

• The Impact of Ownership Structure on Dividend Payout Policy of Listed Plantation Companies in Sri Lanka
• Urban Sustainability in North-East India: A Study through the lens of NER-SDG index
• Performance Assessment of Predictive Forecasting Techniques for Enhancing Hospital Supply Chain Efficiency in Healthcare Logistics
• The Fractured Self in Julian Barnes' Postmodern Fiction: Identity Crisis and Deflation in Metroland and the Sense of an Ending
• Impact of Flood on the Employment, Labour Productivity and Migration of Agricultural Labour in North Bihar