A Constructive Heuristic with Local Search and Quality Function Deployment for the User-Centred Design of Assembly Lines Employing Workers with Cognitive Disabilities

Authors

Reyes Álvarez Hugo Enrique

Instituto Tecnológico de Pachuca, Tecnológico Nacional de México, Pachuca de Soto, Hidalgo, México (México)

Amador Cortez Alfonso Gerosdam

Instituto Tecnológico de Pachuca, Tecnológico Nacional de México, Pachuca de Soto, Hidalgo, México (México)

Ayala Hernández Mauro Haran

Instituto Tecnológico de Pachuca, Tecnológico Nacional de México, Pachuca de Soto, Hidalgo, México (México)

Mohedano Torres Enrique de Jesús

Instituto Tecnológico de Pachuca, Tecnológico Nacional de México, Pachuca de Soto, Hidalgo, México (México)

Article Information

DOI: 10.47772/IJRISS.2026.102500009

Subject Category: Industrial Engineering

Volume/Issue: 10/25 | Page No: 146-161

Publication Timeline

Submitted: 2026-10-21

Accepted: 2026-10-26

Published: 2026-11-14

Abstract

Six out of ten working-age people with disabilities remain outside the labour market in Mexico. Those who do join a production line encounter work plans computed without regard for the fact that people differ from one another, because assembly line balancing models with heterogeneous workers represent each operator by a single value: their mean time. Two workers with the same mean are not equivalent in daily operation if one delivers within a narrow band and the other varies considerably between repetitions. This study incorporates individual performance dispersion as a criterion within the assignment decision and proposes a multi-start constructive heuristic with local search, developed under a user-centred design approach and integrated with quality function deployment. Design requirements were derived from normative and literature sources, and their prioritisation placed time reservation as the highest-priority technical requirement. The method decides using an effective time equal to the mean plus k standard deviations, so that a single parameter reserves a wide margin for an irregular worker and a minimal one for a consistent worker, while a value of zero reproduces the classical method exactly. Monte Carlo evaluation over 124 instances from the four benchmark families shows that the proportion of cycles meeting the committed time rises from 9.9 to 79.4 per cent, and that performance variation falls by between 29 and 45 per cent. A control test with a homogeneous workforce yields a difference of 0.00 per cent, confirming that the advantage stems from differences between people and not from having added slack to the plan.

Keywords

assembly line balancing, cognitive disability, user-centred design, quality function deployment, constructive heuristic.

Downloads

References

1. Akao, Y. (1990). Quality function deployment: Integrating customer requirements into product design. Productivity Press. [Google Scholar] [Crossref]

2. Araújo, F. F. B., Costa, A. M., & Miralles, C. (2015). Balancing parallel assembly lines with disabled workers. European Journal of Industrial Engineering, 9(3), 344–365. [Google Scholar] [Crossref]

3. Cais, M., Culot, G., Scalera, L., & Meneghetti, A. (2025). Enhancing inclusion of workers with disabilities in manufacturing: A human-robot collaborative assembly line balancing optimization model. IFAC-PapersOnLine, 59(10), 2604–2609. https://doi.org/10.1016/j.ifacol.2025.09.438 [Google Scholar] [Crossref]

4. Campana, N. P., Iori, M., & Moreira, M. C. O. (2022). Mathematical models and heuristic methods for the assembly line balancing problem with hierarchical worker assignment. International Journal of Production Research, 60(7), 2193–2211. https://doi.org/10.1080/00207543.2021.1884767 [Google Scholar] [Crossref]

5. Chaves, A. A., Lorena, L. A. N., & Miralles, C. (2009). Hybrid metaheuristic for the assembly line worker assignment and balancing problem. In Hybrid Metaheuristics (LNCS, Vol. 5818, pp. 1–14). Springer. [Google Scholar] [Crossref]

6. Creswell, J. W., & Creswell, J. D. (2018). Research design: Qualitative, quantitative, and mixed methods approaches (5th ed.). SAGE Publications. [Google Scholar] [Crossref]

7. Demirkol Akyol, S., & Baykasoğlu, A. (2019). A multiple-rule based constructive randomized search algorithm for solving assembly line worker assignment and balancing problem. Journal of Intelligent Manufacturing, 30(2), 557–573. https://doi.org/10.1007/s10845-016-1262-6 [Google Scholar] [Crossref]

8. Hauser, J. R., & Clausing, D. (1988). The house of quality. Harvard Business Review, 66(3), 63–73. [Google Scholar] [Crossref]

9. Hernández-Sampieri, R., & Mendoza Torres, C. P. (2018). Metodología de la investigación: las rutas cuantitativa, cualitativa y mixta. McGraw-Hill. [Google Scholar] [Crossref]

10. Instituto Nacional de Estadística y Geografía. (2021). Estadísticas a propósito del Día Internacional de las Personas con Discapacidad (Press release No. 713/21). [Google Scholar] [Crossref]

11. International Organization for Standardization. (2019). ISO 9241-210: Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems. [Google Scholar] [Crossref]

12. International Organization for Standardization. (2020). ISO 21801-1: Cognitive accessibility — Part 1: General guidelines. [Google Scholar] [Crossref]

13. International Organization for Standardization. (2021). ISO 21542: Building construction — Accessibility and usability of the built environment. [Google Scholar] [Crossref]

14. Katiraee, N., Calzavara, M., Finco, S., Battaïa, O., & Battini, D. (2023). Assembly line balancing and worker assignment considering workers' expertise and perceived physical effort. International Journal of Production Research, 61(20), 6939–6959. https://doi.org/10.1080/00207543.2022.2140219 [Google Scholar] [Crossref]

15. Liu, M., Liu, Z., Chu, F., Liu, R., Zheng, F., & Chu, C. (2022). Risk-averse assembly line worker assignment and balancing problem with limited temporary workers and moving workers. International Journal of Production Research, 60(23), 7074–7092. https://doi.org/10.1080/00207543.2021.2002960 [Google Scholar] [Crossref]

16. Malaki, A. A. (2012). A study of the effects of operational time variability in assembly lines with linear walking workers [Master's thesis, Jönköping University]. [Google Scholar] [Crossref]

17. Michels, A. S., & Costa, A. M. (2024). Model and heuristics for the multi-manned assembly line worker integration and balancing problem. International Journal of Production Research, 62(24), 8719–8744. https://doi.org/10.1080/00207543.2024.2347572 [Google Scholar] [Crossref]

18. Miralles, C., García-Sabater, J. P., Andrés, C., & Cardós, M. (2008). Branch and bound procedures for solving the assembly line worker assignment and balancing problem: Application to sheltered work centres for disabled. Discrete Applied Mathematics, 156(3), 352–367. https://doi.org/10.1016/j.dam.2005.12.012 [Google Scholar] [Crossref]

19. Moreira, M. C. O., Ritt, M., Costa, A. M., & Chaves, A. A. (2012). Simple heuristics for the assembly line worker assignment and balancing problem. Journal of Heuristics, 18(3), 505–524. https://doi.org/10.1007/s10732-012-9195-5 [Google Scholar] [Crossref]

20. Moreira, M. C. O., Cordeau, J.-F., Costa, A. M., & Laporte, G. (2015). Robust assembly line balancing with heterogeneous workers. Computers & Industrial Engineering, 88, 254–263. https://doi.org/10.1016/j.cie.2015.07.004 [Google Scholar] [Crossref]

21. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., … Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 [Google Scholar] [Crossref]

22. Ritt, M., Costa, A. M., & Miralles, C. (2016). The assembly line worker assignment and balancing problem with stochastic worker availability. International Journal of Production Research, 54(3), 907–922. https://doi.org/10.1080/00207543.2015.1108534 [Google Scholar] [Crossref]

23. Şahin, M. (2026). Modeling and analysis of the walking worker assembly line balancing problem considering worker-dependent task durations and walking times to increase production rate. Journal of Industrial and Management Optimization, 22(4), 1571–1608. https://doi.org/10.3934/jimo.2026058 [Google Scholar] [Crossref]

24. Şahin, M., & Söylemez, İ. (2026). Balancing assembly line with moving workers and worker-dependent task times using linear programming formulation. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 15(1), 177–187. https://doi.org/10.17798/bitlisfen.1785785 [Google Scholar] [Crossref]

25. Secretaría del Trabajo y Previsión Social. (2016). NOM-034-STPS-2016, Condiciones de seguridad para el acceso y desarrollo de actividades de trabajadores con discapacidad en los centros de trabajo. Diario Oficial de la Federación. [Google Scholar] [Crossref]

26. Türkkan, Y. A., & Yılmaz, H. (2026). A novel meta-heuristic approach to solving the assembly line worker assignment and balancing problem with equity of work distribution. Mathematics, 14(6), 927. https://doi.org/10.3390/math14060927 [Google Scholar] [Crossref]

27. United Nations. (2006). Convention on the Rights of Persons with Disabilities. [Google Scholar] [Crossref]

28. World Health Organization. (2023). Disability and health [Fact sheet]. [Google Scholar] [Crossref]

29. Yılmaz, Ö. F. (2020). Robust optimization for U-shaped assembly line worker assignment and balancing problem with uncertain task times. Croatian Operational Research Review, 11(2), 229–239 [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles