Design Thinking and Simulation for the Development of Protective Packaging for Industrial Components in a Railway Manufacturing Company

Authors

Aimee Xiadani Valencia Torres

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Francisco Alfonso Chiapa Téllez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Luis Alejandro Santana Valadez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Nancy Valdez García

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Morayma Georgina Muñoz Orán

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Vannia Martínez Luna

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Article Information

DOI: 10.47772/IJRISS.2026.102500030

Subject Category: Technology

Volume/Issue: 10/25 | Page No: 487-497

Publication Timeline

Submitted: 2026-10-26

Accepted: 2026-10-31

Published: 2026-11-16

Abstract

Inadequate packaging of industrial components frequently results in mechanical damage, elevated scrap rates, rework, and production delays, generating both direct and hidden costs. This applied research proposes an improved packaging design for Side Screen components in a railway manufacturing company by integrating the Design Thinking methodology with three-dimensional modeling and discrete-event simulation. A systematic literature review following the PRISMA methodology (2016–2026) identified relevant approaches combining user-centered design, simulation, and economic evaluation for industrial packaging redesign. The study applied the five stages of Design Thinking (Empathize, Define, Ideate, Prototype, and Test), supported by empathy maps, process observation, Pareto analysis, SolidWorks/SketchUp modeling, and FlexSim simulation of unloading and storage operations.
The proposed two-level pine-wood rack design incorporates a reinforced metal base, steel strapping, internal guides for stability, and dedicated grooves for dimensional inspection. Projected results indicate a reduction of unloading time of approximately 50%, a significant decrease in damage and scrap rates, and a payback period of less than four months with a highly positive internal rate of return. The findings demonstrate that the combination of Design Thinking and simulation constitutes a practical, low-risk approach for developing protective packaging solutions that improve part protection, operator safety, inspection capability, and overall operational efficiency without requiring high technological investment.

Keywords

Design Thinking, industrial packaging, simulation, scrap reduction, railway components, FlexSim

Downloads

References

1. Berzi, L., et al. (2024). Redesign of reusable packaging for railway components (seats) with an environmental focus. (Application case). [Google Scholar] [Crossref]

2. Djaja, A., & Sutapa, I. N. (2024). Application of Design Thinking to improve visual inspection guide in a packaging company. (Single case study). [Google Scholar] [Crossref]

3. García-Arca, J., & Prado-Prado, J. C. (2020). Contextualize packaging design changes from a sustainable logistics perspective. (Exploratory multi-sector study). [Google Scholar] [Crossref]

4. Kristensen, M., & Rudresh, S. (2026). Improve inbound logistics through packaging standardization [Master’s thesis]. [Google Scholar] [Crossref]

5. Mostafa, A. (2026). Development of a Design Thinking model for intelligent interactive packaging. (Application with AR). [Google Scholar] [Crossref]

6. Murthy, P. (2024). Review of applications of Design Thinking in automotive and consumer packaging. (Literature review). [Google Scholar] [Crossref]

7. OGPSGroup. (2026). Reduce RMA/transit damage through custom packaging structure. (E-commerce/industrial pilot case). [Google Scholar] [Crossref]

8. Ohmori, S., et al. (2026). Evaluate logistics container alternatives in automotive chains using AHP. (Multicriteria decision study). [Google Scholar] [Crossref]

9. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., … Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 [Google Scholar] [Crossref]

10. Physics-based 3D simulation. (2025). Simulate pallet stability and packaging failures. (Focus on synthetic data and failure analysis). [Google Scholar] [Crossref]

11. Toshiba Logistics. (2025). Use of simulation to innovate logistics packaging (speed, cost, sustainability). (Business case with SOLIDWORKS). [Google Scholar] [Crossref]

12. Unipart. (2025). Reduce damage to automotive trim parts through packaging redesign. (Logistics network case). [Google Scholar] [Crossref]

13. Various authors. (2016–2026). Sustainable packaging logistics reviews: Analysis of integration of sustainable packaging in the supply chain. (Conceptual reviews). [Google Scholar] [Crossref]

14. Various authors. (2020–2026). FlexSim applications in packaging systems. (Simulation models for layouts and resource allocation). [Google Scholar] [Crossref]

15. Various authors. (2026). Design Thinking packaging for MSMEs: Creation of eco-friendly packaging designs. (Focus on food SMEs). [Google Scholar] [Crossref]

16. Various authors. Economic analysis of packaging redesign: Evaluation of IRR and payback period of new solutions. (Financial case studies). [Google Scholar] [Crossref]

17. Various authors. Material selection wood vs. plastic packaging: Comparison of materials for industrial protection. (Property studies). [Google Scholar] [Crossref]

18. Various authors. Pareto analysis in packaging damage: Prioritization of causes of damage in industrial packaging. (Diagnostic applications). [Google Scholar] [Crossref]

19. Various authors. Returnable packaging redesign railway/automotive: Design of reusable packaging for specific components. (Environmental and density focus). [Google Scholar] [Crossref]

20. Various authors. Simulation of unloading and storage (FlexSim/SketchUp): Validation of unloading and storage flows with new packaging. (Discrete-event simulation). [Google Scholar] [Crossref]

21. Various authors. Standard operating procedures for packaging: Standardization of packaging processes to reduce errors. (Visual guides and process sheets). [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles