Development and Characterization of a Sustainable Pectin-Based Zeolite–Zno Hybrid Nanocomposite for Antibacterial Biomedical Applications

A novel nanocomposite comprising pectin, zeolite, and zinc oxide (ZnO) nanoparticles (NPs) was hypothesised to enhance antibacterial activity through synergistic effects. Consequently, the material was investigated as a green antibacterial agent for biomedical applications. Pectin was extracted from green apples using ethanol precipitation and dried at 50°C. The nanocomposite was prepared by mixing 1% (w/v) pectin, 2% (w/v) zeolite, and 0.5% (w/v) ZnO nanoparticles in water, followed by stirring for 2 hours at room temperature. For antibacterial testing, 100 µL of a 10^6 CFU/mL bacterial suspension was spread on Mueller-Hinton agar. Composite discs (6 mm diameter, 20 mg) were placed on the plates. After 24 hours of incubation at 37°C, inhibition zones were measured. Minimum inhibitory concentrations were determined by broth microdilution (10–200 µg/mL) in 96-well plates. FTIR analysis confirmed the presence of functional group interactions within the materials. The pectin-zeolite-ZnO nanocomposite had strong antibacterial activity against both bacteria. For Staphylococcus aureus, the nanocomposite produced an inhibition zone of 18 ± 0.5 mm and for Escherichia coli, 16 ± 0.6 mm. These values were significantly greater than those observed for the pectin (9.3 ± 0.3 mm), zeolite (10.1 ± 0.4 mm), or ZnO nanoparticles alone (13 ± 0.5 mm). The minimum inhibitory concentration (MIC) for the nanocomposite was 40 µg/mL against S. aureus and 50 µg/mL against E. coli. This increase in antibacterial efficacy results from the synergy among zeolite, pectin, and ZnO nanoparticles, which enhances bacterial cell disruption and inhibition. The developed nanocomposite is a promising antibacterial agent. Its strong antibacterial activity suggests potential use in biomedical applications such as wound dressings, implant coatings, or antibacterial surfaces, where effective inhibition of bacterial growth is essential. These results highlight the nanocomposite's translational potential for preventing infections and supporting the development of safe biomedical devices.

Pectin, Zeolite, Zinc oxide nanoparticles (ZnO), nanocomposite, green antibacterial agent

1. Oggiano, G., Pokimica, B., Popović, T., & Taki, M. (2023). Beneficial properties of zeolite. Italian Journal of Food Science, 35(1). https://doi.org/10.15586/ijfs.v35i1.2325 [Google Scholar] [Crossref]

2. Canli, M., Abali, Y. S., & Bayca, U. (2013). Removal of methylene blue by natural and Ca- and K-exchanged zeolite treated with hydrogen peroxide. Physicochemical Problems of Mineral Processing, 49, 481–496. [Google Scholar] [Crossref]

3. Alotaibi, A. M. (2025). An overview of zeolites from historical background to diverse applications. Molecules, 30(20), 4036. https://doi.org/10.3390/molecules30204036 [Google Scholar] [Crossref]

4. Kordala, N., & Wyszkowski, M. (2024). Zeolite properties, methods of synthesis, and selected applications. Molecules, 29(5), 1069. https://doi.org/10.3390/molecules29051069 [Google Scholar] [Crossref]

5. Hao, J., Milain, I. S., Eken, Z. B., Mravak-Stipetic, M., Pavelić, K., & Ozer, F. (2021). Effects of zeolite as a drug delivery system on cancer therapy: A systematic review. Molecules, 26(20), 6196. https://doi.org/10.3390/molecules26206196 [Google Scholar] [Crossref]

6. Serati, N. H., Jafari, A., Roshangar, L., Dadashpour, M., Pilehvar-Soltanahmadi, Y., & Zarghami, N. (2020). Biomedical applications of zeolite-based materials: A review. Materials Science and Engineering: C, 116, 111225. https://doi.org/10.1016/j.msec.2020.111225 [Google Scholar] [Crossref]

7. Shi, L., & Gunasekaran, S. (2008). Preparation of pectin-ZnO nanocomposite. Nanoscale Research Letters, 3, 12491–12495. https://doi.org/10.1007/s11671-008-9185-6 [Google Scholar] [Crossref]

8. Taher Sih, R., Hsu, C. Y. B., Almajidi, Y. Q., Ahmad, I., Ali, I. R., Menon, S. V., et al. (2025). Magnetic agar-cellulose hydrogel-g-C3N4-ZnAl LDH-Fe3O4 nanocomposite for efficient pirimicarb removal and antibacterial water purification. International Journal of Biological Macromolecules, 324(Pt 1), 147076. [Google Scholar] [Crossref]

9. Kodoth, A. K., Ghate, V. M., Lewis, S. A., & Badalamoole, V. (2018). Application of pectin zinc oxide hybrid nanocomposite in the delivery of a hydrophilic drug and a study of its isotherm, kinetics and release mechanism. International Journal of Biological Macromolecules, 115, 1024–1033. https://doi.org/10.1016/j.ijbiomac.2018.04.069 [Google Scholar] [Crossref]

10. Wang, R., Li, Y., Shuai, X., Chen, J., Liang, R., & Liu, C. (2021). Development of pectin-based aerogels with several excellent properties for the adsorption of Pb2+. Foods, 10(12), 3127. https://doi.org/10.3390/foods10123127 [Google Scholar] [Crossref]

11. Li, J., Yang, Z. L., Ding, T., Song, Y. J., Li, H. C., Li, D. Q., et al. (2022). The role of surface functional groups of pectin and pectin-based materials on the adsorption of heavy metal ions and dyes. Carbohydrate Polymers, 276, 118789. [Google Scholar] [Crossref]

12. Trentini, J. D., Jaerger, S., Balaba, N., Alves, H. J., Wypych, F., & Anaiss, F. J. A. (2023). Adsorptive removal of Congo red by macroporous ZnO obtained from citrus pectin gelation and reuse as a hybrid pigment. Particulate Science and Technology, 41, 1120–1130. https://doi.org/10.1080/02726351.2022.2064786 [Google Scholar] [Crossref]

13. Lara-Espinoza, C., Carvajal-Millán, E., Balandrán-Quintana, R., López-Franco, Y., & Rascón-Chu, A. (2018). Pectin and pectin-based composite materials beyond food texture. Molecules, 23(4), 942. https://doi.org/10.3390/molecules23040942 [Google Scholar] [Crossref]

14. Maxwell, E. G., Belshaw, N. J., Waldron, K. W., & Morris, V. J. (2012). Pectin: An emerging new bioactive food polysaccharide. Trends in Food Science & Technology, 24, 264–273. [Google Scholar] [Crossref]

15. Belkheiri, A., Forouhar, A., Ursu, A. V., Dubessay, P., Pierre, G., Delattre, C., et al. (2021). Extraction, characterization, and applications of pectins from plant by-products. Applied Sciences, 11(14), 6596. https://doi.org/10.3390/app11146596 [Google Scholar] [Crossref]

16. Kedir, W. M., Deresa, E. M., & Diriba, T. F. (2022). Pharmaceutical and drug delivery applications of pectin and its modified nanocomposites. Heliyon, 8(9), e10654. https://doi.org/10.1016/j.heliyon.2022.e10654 [Google Scholar] [Crossref]

17. Sontakke, P. B., Swami, S. B., Zambre, S., Venkatesh, K. V., Patange, S. B., & Pardeshi, I. L. (2023). Pectin, sources and its food and pharmaceutical applications: An overall review. International Journal of Food Fermentation Technology, 13(2), 229–238. [Google Scholar] [Crossref]

18. Mahdy, S. A. Z., Amin, A. S., Abouzeid, R., Moustafa, I. M. I., Youssef, A. M., & El Habbasha, E. S. (2024). Pectin methods of extraction and biomedical application. Egyptian Journal of Chemistry, 67(4), 461–483. [Google Scholar] [Crossref]

19. Shaibu, C., Dinshiya, J., & Shaibu, V. E. (2022). Extraction and characterization of pectin from ripe and unripe mango (Mangifera indica) peel. Asian Journal of Natural Products and Biochemistry. https://doi.org/10.13057/biofarf200104 [Google Scholar] [Crossref]

20. Roman-Benn, A., Contador, C. A., Li, M. W., Lam, H. M., Ah-Hen, K., Ulloa, P. E., et al. (2023). Pectin: An overview of sources, extraction and applications in food products, biomedical, pharmaceutical and environmental issues. Food Chemistry Advances, 1, 100192. https://doi.org/10.1016/j.focha.2023.100192 [Google Scholar] [Crossref]

21. Wakweya, B., & Jifar, W. W. (2023). In vitro evaluation of antibacterial activity of synthetic zeolite supported Ag-ZnO nanoparticle against a selected group of bacteria. Journal of Experimental Pharmacology, 15, 139–147. https://doi.org/10.2147/JEP.S396118 [Google Scholar] [Crossref]

22. Joshi, S. S. (2025). Effect of synthetic routes on physicochemical properties and biomedical applications of zinc oxide nanomaterials and quaternary ammonium compounds. Medical Research Archives, 13(3). https://doi.org/10.18103/mra.v13i3.6439 [Google Scholar] [Crossref]

23. Raha, S., & Ahmaruzzaman, M. (2022). ZnO nanostructured materials and their potential applications, progress, challenges and perspectives. Nanoscale Advances, 4, 1868–1925. [Google Scholar] [Crossref]

24. Matinise, N., Fuku, X. G., Kaviyarasu, K., Mayedwa, N., & Maaza, M. (2017). ZnO nanoparticles via Moringa oleifera green synthesis: Physical properties, mechanism of formation. Applied Surface Science, 406, 339–347. [Google Scholar] [Crossref]

25. Okaiyeto, K., Gigliobianco, M. R., & Di Martino, P. (2024). Biogenic zinc oxide nanoparticles as a promising antibacterial agent: Synthesis and characterization. International Journal of Molecular Sciences, 25(17), 9500. https://doi.org/10.3390/ijms25179500 [Google Scholar] [Crossref]

26. Hao, Y., Wang, Y., Zhang, L., Liu, F., Jin, Y., Long, J., et al. (2024). Advances in antibacterial activity of zinc oxide nanoparticles against Staphylococcus aureus: Review. Biomedical Reports, 16(1), 1. https://doi.org/10.3892/br.2024.1849 [Google Scholar] [Crossref]

27. Huang, R., Huang, X., Zhang, Q., Fan, J., Zhang, Z., & Huang, J. (2024). Humidity-responsive pectin-AgNPs-ZnO composite films with high antimicrobial and UV-proof functions. International Journal of Biological Macromolecules, 279(Pt 1), 135075. [Google Scholar] [Crossref]

28. Azizi-Lalabadi, M., Ehsani, A., Divband, B., & Alizadeh-Sani, M. (2019). Antimicrobial activity of titanium dioxide and zinc oxide nanoparticles supported in 4A zeolite and evaluation of the morphological characteristic. Scientific Reports, 9, 17439. https://doi.org/10.1038/s41598-019-54025-0 [Google Scholar] [Crossref]

29. Hari, K. D., Garcia, C. V., Shin, G. H., & Kim, J. T. (2021). Improvement of the UV barrier and antibacterial properties of crosslinked pectin-zinc oxide bionanocomposite films. Polymers, 13(15), 2403. https://doi.org/10.3390/polym13152403 [Google Scholar] [Crossref]

30. Chandel, V., Biswas, D., Roy, S., Vaidya, D., Verma, A., & Gupta, A. (2022). Current advancements in pectin extraction, properties and multifunctional applications. Foods, 11(17), 2683. https://doi.org/10.3390/foods11172683 [Google Scholar] [Crossref]

31. Zhang, L., Gadd, G. M., & Li, Z. (2021). Microbial biomodification of clay minerals. Advances in Applied Microbiology, 111, 1–39. [Google Scholar] [Crossref]

32. Liu, X., Renard, C. M., Bureau, S., & Le Bourvellec, C. (2021). Revisiting the contribution of ATR-FTIR spectroscopy to characterize plant cell wall polysaccharides. Carbohydrate Polymers, 262, 117935. [Google Scholar] [Crossref]

33. Didem, D., Seda, C., Dilek, G., & Nimet, B. (2021). Extraction of pectin from albedo of lemon peels for preparation of tissue engineering scaffolds. Polymer Bulletin, 78(4), 2211–2226. https://doi.org/10.1007/s00289-020-03208-1 [Google Scholar] [Crossref]

34. Tenover, F. C. (2019). Antimicrobial susceptibility testing. In Encyclopedia of Microbiology. [Google Scholar] [Crossref]

35. Pankey, G. A., & Sabath, L. D. (2004). Clinical relevance of bacteriostatic versus bactericidal mechanisms of action in the treatment of gram-positive bacterial infections. Clinical Infectious Diseases, 38, 864–872. [Google Scholar] [Crossref]

36. Kumar, S., Ahmad, R., Jalal, M., Tayyaba, U., Singh, A., Shahid, M., & Lee, B. I. (2023). Antibacterial and antibiofilm activity of Abroma augusta stabilized silver (Ag) nanoparticles against drug-resistant clinical pathogens. Frontiers in Molecular Biosciences. https://doi.org/10.3389/fmolb.2023.1292509 [Google Scholar] [Crossref]

• Factors Responsible for End-User Preference for Imported Ceramic Sanitary Ware in Ogun State, Nigeria
• Exploring the Potentials of Ibule-Soro Clay for the Formulating of Mid-Temperature Decorative Slip Glazes
• Heat Treatment Analysis on Microstructure and Mechanical Properties of Thixoformed Aluminium Alloys