Heat Sink Geometry Comparison for Energy Efficiency in Compact Electronics: Implications for Electricity Savings and CO₂ Emission Reduction

The rising global demand for digital technology has increased electricity consumption across all levels of electronic usage, from household devices to large-scale data centers. Improving the energy efficiency of compact electronics is therefore essential for reducing power demand and lowering the CO₂ emissions associated with electricity generation. This study compares two copper heat sink geometries—fin-type and pin-type—to evaluate their influence on thermal management and energy-use effectiveness in a miniature Application-Specific Integrated Circuit (ASIC) device exposed to laminar airflow for heat dissipation. Laminar airflow at a speed of 0.5 m/s was selected to simulate typical compact electronic ventilation. Using infrared thermography and onboard sensing, the study examines how geometric variations affect heat dissipation, operational temperature, and computational efficiency under a constant 100 W load. Results show that the 9-pin heat sink significantly reduces MOSFET temperature and increases computational output compared to both the 3-fin design and baseline conditions without a heat sink. These improvements translate into lower thermal losses, enabling the device to operate more efficiently with reduced electrical strain. By demonstrating that simple, low-cost geometric enhancements can meaningfully decrease heat accumulation and improve energy efficiency, this research highlights a practical pathway for reducing electricity consumption and the associated CO₂ emissions generated from fossil-fuel-based power systems. Moreover, the design insights are supported by recent advances in pin-fin design and optimization, reinforcing their relevance for sustainable electronics.

The rising global demand for digital technology has increased electricity consumption across all levels of electronic usage

1. Mytton, D., & Ashtine, M. (2022). Sources of data centre energy estimates: A comprehensive review. Joule, 6(9), 2032–2056. [Google Scholar] [Crossref]

2. Khosravi, A., et al. (2024). Review of energy efficiency and technological advances in data‑centre power systems. Renewable and Sustainable Energy Reviews. [Google Scholar] [Crossref]

3. Zhang, Y., et al. (2022). Prediction of overall energy consumption of data centers. Sensors, 22(10), 3704. [Google Scholar] [Crossref]

4. Noussan, M., et al. (2024). Hourly electricity CO₂ intensity profiles. Energy. [Google Scholar] [Crossref]

5. Rahman, M. A., et al. (2024). Advancing thermal management in electronics. RSC Advances. [Google Scholar] [Crossref]

6. Yang, T., et al. (2024). Application of pin‑fins in enhancing heat transfer. Energies, 17(17), 4305. [Google Scholar] [Crossref]

7. Qin, Z., et al. (2024). Heat transfer with micro pin fins. Micromachines, 15(9), 1120. [Google Scholar] [Crossref]

8. Zohora, F.-T., et al. (2024). Perforated pin‑fin heat sinks. Heliyon, 11(1), e41496. [Google Scholar] [Crossref]

9. Linke, M., et al. (2024). Pin and perforated heatsink cooling. Journal of Thermal Analysis and Calorimetry, 149, 6517–6529. [Google Scholar] [Crossref]

• Arctic Frontier and Climate Change: Reshaping the Geography, Ecology, and Economic Potential of Russia’s Arctic Region
• Beyond Greenhouse Gases: Triangulating Climate Action for a Just and Safer World
• Impact of Population Growth on the Spatial Distribution of Particulate Matter (Pm2.5) in the Niger Delta
• Climate Change, Resource Scarcity and Conflicts in Omor and its Environs, Anambra State, Nigeria
• An Ecocritical Analysis of Amitav Ghosh’s The Great Derangement: Climate Change and the Unthinkable.