Improving Productivity and Fiscal Compliance in a Construction SME in Hidalgo Through Kaizen and the PDCA Cycle: A Case Study
Authors
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Sheila Monserrat Delgadillo Morales
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Article Information
DOI: 10.47772/IJRISS.2026.102500005
Subject Category: Education
Volume/Issue: 10/25 | Page No: 57-69
Publication Timeline
Submitted: 2026-10-14
Accepted: 2026-10-19
Published: 2026-11-14
Abstract
Micro, small, and medium-sized enterprises (SMEs) in the construction sector of Hidalgo, Mexico, frequently face productivity constraints and fiscal compliance challenges arising from limited process standardization, high documentary error rates, prolonged administrative cycle times, and dependence on reactive corrections. These inefficiencies particularly affect critical processes such as IMSS worker registration and guarantee-fund administration. This study evaluates the impact of a structured Kaizen and PDCA-cycle intervention on fiscal and administrative productivity in a specialized engineering and construction SME and proposes a replicable six-phase implementation methodology.
A longitudinal mixed-methods experimental single-case design was employed. A PRISMA-adapted systematic review of 22 studies (2016–2026) informed the intervention design. The empirical component comprised six sequential phases aligned with the PDCA cycle: diagnostic assessment (including Ishikawa 6M analysis and baseline KPIs), process redesign and prioritization, capacity development, a five-month pilot implementation, evaluation and refinement, and scale-and-sustain activities. Quantitative pre-post comparisons of five dependent variables were triangulated with qualitative data from interviews, surveys, and observations.
The intervention produced substantial and statistically significant improvements. IMSS worker registration cycle time decreased from 4.8 ± 1.6 to 1.1 ± 0.4 days (−77%), documentation error rate fell from 6.2 to 0.8 errors per week (−87%), the percentage of complete files rose from 61% to 93%, average file localization time dropped from 19.4 to 4.1 minutes (−79%), and the timely guarantee-fund release rate increased from 47% to 88%. All SMART targets were achieved or exceeded, with large effect sizes. Qualitative findings confirmed increased staff autonomy, reduced reactive corrections, and positive perceptions of standardization, visual management, and 5S.
The results support the hypothesis and align with literature benchmarks for low-cost Kaizen/PDCA applications in SME administrative and compliance processes. The proposed six-phase methodology offers a practical, low-risk pathway for other resource-constrained construction and engineering SMEs in Hidalgo and similar Mexican contexts. Limitations of the single-case design are acknowledged, and future multi-firm and longer-term studies are recommended
Keywords
Kaizen, PDCA cycle, fiscal compliance, construction SMEs, Hidalgo, continuous improvement
Downloads
References
1. Biadacz, R. (2024). Application of Kaizen and Kaizen Costing in SMEs. Production Engineering Archives, 30(1), 17–35. https://doi.org/10.30657/pea.2024.30.2 [Google Scholar] [Crossref]
2. Brycht, N. (2024). Assessment of the usefulness of the implementation of the Kaizen method in the construction industry. Scientific Papers of Silesian University of Technology. Organization and Management Series, 2024(198), 67–79. https://doi.org/10.29119/1641-3466.2024.198.4 [Google Scholar] [Crossref]
3. Crosby, P. B. (1979). Quality is free: The art of making quality certain. McGraw-Hill. [Google Scholar] [Crossref]
4. Deming, W. E. (1986). Out of the crisis. Massachusetts Institute of Technology, Center for Advanced Engineering Study. [Google Scholar] [Crossref]
5. Imai, M. (1986). Kaizen: The key to Japan’s competitive success. McGraw-Hill. [Google Scholar] [Crossref]
6. INEGI. (2024). Estadísticas de productividad y digitalización en Mypes manufactureras mexicanas. Instituto Nacional de Estadística y Geografía. [Google Scholar] [Crossref]
7. Ishikawa, K. (1982). Guide to quality control (2nd rev. English ed.). Asian Productivity Organization. [Google Scholar] [Crossref]
8. Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. McGraw-Hill. [Google Scholar] [Crossref]
9. OECD. (2019). OECD territorial reviews: Hidalgo, Mexico. OECD Publishing. https://doi.org/10.1787/9789264310391-en [Google Scholar] [Crossref]
10. Ohno, T. (1988). Toyota production system: Beyond large-scale production. Productivity Press. [Google Scholar] [Crossref]
11. Omotayo, T. S., Kulatunga, U., & Bjeirmi, B. (2018). Critical success factors for Kaizen implementation in the Nigerian construction industry. International Journal of Productivity and Performance Management, 67(9), 1816–1836. https://doi.org/10.1108/IJPPM-11-2017-0296 [Google Scholar] [Crossref]
12. Rogers, E. M. (2003). Diffusion of innovations (5th ed.). Free Press. [Google Scholar] [Crossref]
13. Sihombing, R., Suhaeri, Sarjono, & Purba, H. H. (2025). Implementation of Kaizen in various industries: A systematic literature review. Performa: Media Ilmiah Teknik Industri, 24(2), 224–235. https://doi.org/10.20961/performa.v24i2.2746 [Google Scholar] [Crossref]
14. Singh, J., & Singh, H. (2009). Kaizen philosophy: A review of literature. The IUP Journal of Operations Management, 8(2), 51–72. [Google Scholar] [Crossref]
15. Suárez-Barraza, M. F., & Miguel-Dávila, J. Á. (2011). Implementación del Kaizen en México: Un estudio exploratorio de una aproximación gerencial japonesa en el contexto latinoamericano. Innovar, 21(41), 19–38. [Google Scholar] [Crossref]
16. Suárez-Barraza, M. F., Miguel-Dávila, J. Á., & Castillo-Arias, I. (2011). La aplicación del Kaizen en las organizaciones mexicanas: Un estudio empírico. GCG: Revista de Globalización, Competitividad y Gobernabilidad, 5(1), 60–74. [Google Scholar] [Crossref]
17. Vázquez Rojas, A. M., Rodríguez Juárez, E., & González Gómez, D. X. (2016). Un análisis de la productividad manufacturera en el Estado de Hidalgo. Cimexus, 11(2), 13–28. [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Assessment of the Role of Artificial Intelligence in Repositioning TVET for Economic Development in Nigeria
- Teachers’ Use of Assure Model Instructional Design on Learners’ Problem Solving Efficacy in Secondary Schools in Bungoma County, Kenya
- “E-Booksan Ang Kaalaman”: Development, Validation, and Utilization of Electronic Book in Academic Performance of Grade 9 Students in Social Studies
- Analyzing EFL University Students’ Academic Speaking Skills Through Self-Recorded Video Presentation
- Major Findings of The Study on Total Quality Management in Teachers’ Education Institutions (TEIs) In Assam – An Evaluative Study