Improving the Supply Process in SMEs in Hidalgo Through the Use of AI with N8N

Authors

Yohensis Mariam Guillen Zamora

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

León Escalante Santos Guadalupe

Secretaría de Planeación, Fianzas y Administración (Mexico)

Dariana Anaya González

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Claudia Reyes Bolaños

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Luz Angélica Cortes Madrigal

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Larissa Montserrat Pérez Avalos

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Article Information

DOI: 10.47772/IJRISS.2026.102500001

Subject Category: Supply Chain Management

Volume/Issue: 10/25 | Page No: 1-13

Publication Timeline

Submitted: 2026-10-13

Accepted: 2026-10-19

Published: 2026-11-14

Abstract

Micro, small, and medium-sized enterprises (SMEs) represent more than 99% of economic units in Mexico and generate around 70% of formal employment; however, they face productivity gaps due to limited technological adoption and reliance on manual processes in the supply chain. This applied study analyzes the improvement of the supply process in a snack distribution SME in Mineral de la Reforma, Hidalgo, that operates in the State of Mexico, Puebla, and Tlaxcala. The problem focuses on inaccurate forecasts, manual inventory management with errors close to 20%, and response times of up to 48 hours, which generate frequent stockouts.
A systematic literature review following PRISMA was conducted, identifying 20 key studies on artificial intelligence and low-code automation in SME supply chains. Subsequently, a pre-post applied experimental case study design was implemented, structured in six phases: diagnosis, workflow design in N8N, training, pilot implementation, evaluation, and scaling. The independent variable was the implementation of N8N with AI agents; the dependent variables were order processing time, inventory accuracy, and stockout incidence.
The results showed a 30% reduction in processing times, a 25% improvement in inventory accuracy, and a 30% decrease in stockouts, reaching 95% automation. These findings are consistent with the literature and support the hypothesis of significant improvement. The study provides pre-post empirical evidence in a little-explored regional context and proposes a low-risk, highly replicable methodology. Limitations of the single-case design are recognized, and multi-company and longitudinal future research is suggested

Keywords

SMEs, N8N, supply chain, artificial intelligence, automation, Hidalgo

Downloads

References

1. AISD. (2026). N8N workflows for order intake and inventory synchronization: Case studies. AISD Technical Reports. [Google Scholar] [Crossref]

2. Bettiol, M., Capestro, M., Di Maria, E., & Micelli, S. (2022). Disentangling the link between ICT and Industry 4.0: Impacts on knowledge-intensive business services. International Journal of Production Economics, 247, Article 108460. https://doi.org/10.1016/j.ijpe.2022.108460 [Google Scholar] [Crossref]

3. Bigliardi, B., Bottani, E., Casella, G., Filippelli, S., Petroni, A., & Pini, B. (2026). Artificial intelligence in SME supply chains: A bibliometric and case study analysis. Procedia Computer Science. [Google Scholar] [Crossref]

4. Cirillo, V., Fanti, L., Mina, A., & Ricci, A. (2023). Digitalization and productivity: The role of organizational capabilities. Industrial and Corporate Change. [Google Scholar] [Crossref]

5. Culot, G., Podrecca, M., & Nassimbeni, G. (2024). Artificial intelligence in supply chain management: A systematic literature review of empirical studies and research directions. Computers in Industry, 162, Article 104132. https://doi.org/10.1016/j.compind.2024.104132 [Google Scholar] [Crossref]

6. Diario de México. (2026, March 15). Growth in the use of artificial intelligence in Mexican logistics. Diario de México. [Google Scholar] [Crossref]

7. Diractum. (2025). Productivity reports on 3D printing for Mexican firms. Diractum. [Google Scholar] [Crossref]

8. Ecosistema Startup. (2026). Digital maturity report of SMEs in Mexico 2026. Ecosistema Startup. [Google Scholar] [Crossref]

9. Frazier, W. E., et al. (2024). Data management strategies for additive manufacturing adoption in SMEs. Additive Manufacturing, 72. [Google Scholar] [Crossref]

10. García, A., López, M., & Hernández, R. (2025). Integrated value and supply chain model to boost the competitiveness of SMEs in the municipality of Mixquiahuala de Juárez, Hidalgo. Revista de Gestão Social e Ambiental, 19(3), 1–15. [Google Scholar] [Crossref]

11. Haug, A., Adsbøll Wickstrøm, K., Stentoft, J., & Philipsen, K. (2023). The adoption of additive manufacturing and AI in SMEs: Barriers and enablers. Journal of Manufacturing Technology Management. [Google Scholar] [Crossref]

12. Hernández Díaz, A., et al. (2026). Artificial intelligence in the management of supply chains of Mexican SMEs. Revista de Ingeniería Industrial. [Google Scholar] [Crossref]

13. Hernández Vega, L. (2026). Barriers to AI adoption in Mexican SMEs. Ecosistema Startup Report. [Google Scholar] [Crossref]

14. INEGI. (2024). Economic Censuses 2024: Timely results. Instituto Nacional de Estadística y Geografía. [Google Scholar] [Crossref]

15. KPMG México. (2026). Nearshoring and digital transformation in the Mexican supply chain. KPMG. [Google Scholar] [Crossref]

16. Marzi, G., et al. (2020). Additive manufacturing in Italian SMEs: Evidence from empirical studies. Technovation, 92–93. [Google Scholar] [Crossref]

17. McConnell, S., et al. (2024). Productivity improvements in powder bed fusion metal additive manufacturing: A systematic literature review. Journal of Manufacturing Processes, 110, 250–265. [Google Scholar] [Crossref]

18. Mohedano Torres, E. de J., Hernández Islas, J., Chiapa Tellez, F. A., Aguilar Pérez, N., & Soní Ramírez, K. S. (2026). Implementation of an intelligent supply management system in a Mexican SME using N8N. Revista NeyArt, 4(1). https://doi.org/10.61273/neyart.v4i1.165 [Google Scholar] [Crossref]

19. OECD. (2019). OECD territorial reviews: Hidalgo, Mexico. OECD Publishing. https://doi.org/10.1787/9789264303490-en [Google Scholar] [Crossref]

20. OECD. (2026). OECD economic surveys: Mexico 2026. OECD Publishing. [Google Scholar] [Crossref]

21. Onorio, P. O., Frazzon, E. M., Leusin, M. E., Cordes, C., & Azevedo, V. (2026). Artificial intelligence supporting human intelligence: Impacts on supply chains of small and medium enterprises. Procedia Computer Science, 277, 2485–2494. [Google Scholar] [Crossref]

22. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., … Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, Article n71. https://doi.org/10.1136/bmj.n71 [Google Scholar] [Crossref]

23. Rogers, E. M. (2003). Diffusion of innovations (5th ed.). Free Press. [Google Scholar] [Crossref]

24. Saci, A. (2026). Low-code automation with N8N and AI agents for inventory cycle counting in Latin American SMEs. Journal of Supply Chain Automation. [Google Scholar] [Crossref]

25. Saldana-Robles, A., et al. (2019). Insertion of low-cost additive manufacturing in engineering education. Revista de Ingeniería Educativa, 15(2), 112–125. [Google Scholar] [Crossref]

26. Sæterbø, M., & Solvang, W. D. (2024). Adoption matrix for metal additive manufacturing in SMEs. Procedia CIRP, 120, 450–455. [Google Scholar] [Crossref]

27. Suárez, J., & Romero, L. (2024). Productivity in additive manufacturing farms vs. injection in low volume. Ingeniería Industrial, 42(1), 67–80. [Google Scholar] [Crossref]

28. Toorajipour, R., Sohrabpour, V., Nazarpour, A., Oghazi, P., & Fischl, M. (2021). Artificial intelligence in supply chain management: A systematic literature review. Journal of Business Research, 122, 502–517. https://doi.org/10.1016/j.jbusres.2020.09.009 [Google Scholar] [Crossref]

29. Varela Insights. (2026). N8N implementations in Latin American SMEs: Productivity results. Varela Insights Report. [Google Scholar] [Crossref]

30. Vázquez Rojas, A. R., et al. (2016). Analysis of total factor productivity in the state of Hidalgo. Revista de Economía Regional. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles