Light-Off Factory Systems to Be Fully Deployed in the Future?

Authors

Shahrudin Zakaria

Universiti Teknikal Malaysia Melaka (Malaysia)

Norazlina Abd Razak

Universiti Teknikal Malaysia Melaka (Malaysia)

Sulaiman Sabikan

Universiti Teknikal Malaysia Melaka (Malaysia)

Muhammad Afif Firdaus

Universiti Tun Hussein Onn Malaysia (Malaysia)

Maslan Zainon

Universiti Teknikal Malaysia Melaka (Malaysia)

Mazree Ibrahim

Universiti Teknikal Malaysia Melaka (Malaysia)

Mohd Razali Mohamad Sapiee

Universiti Teknikal Malaysia Melaka (Malaysia)

Article Information

DOI: 10.47772/IJRISS.2026.100900711

Subject Category: manufacturing engineering

Volume/Issue: 10/9 | Page No: 10290-10295

Publication Timeline

Submitted: 2026-09-26

Accepted: 2026-10-01

Published: 2026-10-21

Abstract

A previous study suggested that the full implementation of Lights-Out Manufacturing (LOM) remained a future possibility. Therefore, this paper looks at it from another point of view, examining how three important premises may converge to provide a rational basis for considering future LOM. This article presents three main premises that provide the logical basis for considering a future development in manufacturing. A different kind of infrared (IR) vision system is envisioned for the manufacturing sector sometime in the future, with potential economic benefits if it becomes practical. This provides a possible direction for future research on IR-based supervisory systems for LOM

Keywords

Lights-Out Manufacturing, Technology Forecasting, Infrared Vision System, Manufacturing Automation

Downloads

References

1. N. K. Lee, “Total Automation: The Possibility of Lights-Out Manufacturing in the Near Future”, Missouri S&T’s Peer to Peer, vol. 2, no. 1, pp. 4, 2018. [Google Scholar] [Crossref]

2. C. J. Turner, R. Ma, J. Chen, and J. Oyekan, “Human in the loop: Industry 4.0 technologies and scenarios for worker mediation of automated manufacturing,” IEEE Access, vol. 9, pp. 103950–103966, 2021. [Google Scholar] [Crossref]

3. M. Decker, M. Fischer and I. Ott, “Service Robotics and Human Labor: A first technology assessment of substitution and cooperation”, Robotics and Autonomous Systems, vol. 87, pp. 348-354, 2017. [Google Scholar] [Crossref]

4. M. Hermann, T. Pentek and B. Otto, “Design principles for industrie 4.0 scenarios” in 2016 49th Hawaii international conference on system sciences (HICSS), 2016, January, pp. 3928-3937. doi: 10.1109/HICSS.2016.488. [Google Scholar] [Crossref]

5. M. Aly, F. Khomh and S. Yacout, “What Do Practitioners Discuss about IoT and Industry 4.0 Related Technologies? Characterization and Identification of IoT and Industry 4.0 Categories in Stack Overflow Discussions”, Internet of Things, vol. 14, pp. 100364, 2021. [Google Scholar] [Crossref]

6. M. N. H. Mohd Rosdi, M. R. Muhamad, W. H. W. Mahmood and M. H. A. Kadir, “Discovering the Readiness of Malaysian Industry in Adaptation of Industrial Revolution 4.0 towards Manufacturing Sustainability”, International Journal of Recent Technology and Engineering, vol. 8, no. 4, 10994-10998, 2019. [Google Scholar] [Crossref]

7. J. Hashagen, “Seeing Beyond the Visible: Short‐wave infrared (SWIR) cameras offer new application fields in machine vision”, Optik & Photonik, vol. 10, no. 3, pp. 34-37, 2015. [Google Scholar] [Crossref]

8. Rozlosnik, “Potential contribution of the Infrared Industry in the future of IoT/IIoT”, in Proceedings of the 14th Quantitative InfraRed Thermography Conference, Berlin, Germany, 2018, June, pp. 25-29. [Google Scholar] [Crossref]

9. E.H. Lee, “A review on applications of ınfrared heating for food processing in comparison to other ındustries”, in Innovative Food Processing Technologies: A Comprehensive Review, K. Knoerzer and K. Muthukumarappan, Eds. Elsevier, 2021, pp. 431-455. [Google Scholar] [Crossref]

10. G. Struzikiewicz and A. Sioma, “Application of infrared and high-speed cameras in diagnostics of CNC milling machines: Case study”, in Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019, R. S. Romaniuk and M. Linczuk, Eds. 2019, November, vol. 11176, pp. 81-86, SPIE. https://doi.org/10.1117/12.2536679. [Google Scholar] [Crossref]

11. M. Otsuka, F. Funakubo, T. Suzuki, Y. Hattori, K. Tsutsui, N. Adachi and T. Sasaki. “Real-time monitoring of tablet surface temperature during high-speed tableting by infrared thermal imaging”, Journal of Drug Delivery Science and Technology, vol. 68, pp. 102736, 2021. [Google Scholar] [Crossref]

12. K. Chrzanowski, “Review of night vision technology”, Opto-Electronics Review, vol. 21, no. 2, pp. 153-181, 2013. [Google Scholar] [Crossref]

13. F. Khodayar, S. Sojasi and X. Maldague, “Infrared thermography and NDT: 2050 horizon”, Quantitative InfraRed Thermography Journal, vol. 13, no. 2, pp. 210-231, 2016. [Google Scholar] [Crossref]

14. R. Vandersmissen, “Night-vision camera combines thermal and low-light-level images”, Photonik International, vol. 2, no. 2-4, 2008. [Google Scholar] [Crossref]

15. V. Kumar and A. Bhattacharya, “Review on Night Vision Technology in Automobiles”, Journal of Critical Reviews, vol. 7, no. 3, pp. 813-818, 2020. [Google Scholar] [Crossref]

16. B. J. Jung, S. P. Kwon and Y. W. Kim, “Design of Far-infrared Optical System for Night Object Recognition for Safe Driving of Intelligent Automobile”, International Journal of Innovative Technology and Exploring Engineering, vol. 8, no. 82, pp. 698-703, 2019. [Google Scholar] [Crossref]

17. H. Altinpulluk, “Current trends in augmented reality and forecasts about the future”, in Proceedings of ICERI 2017 Conference, pp. 3649-3655, 2017, November. [Google Scholar] [Crossref]

18. S. I. Tay, J. Alipal and T. C. Lee, “Industry 4.0: Current practice and challenges in Malaysian manufacturing firms”, Technology in Society, vol. 67, pp. 101749, 2021. [Google Scholar] [Crossref]

19. K. A. Z. Ariffin and F. H. Ahmad, “Indicators for maturity and readiness for digital forensic investigation in era of industrial revolution 4.0”, Computers & Security, vol. 105, pp. 102237, 2021. [Google Scholar] [Crossref]

20. W. S. Alaloul, M. S. Liew, N. A. W. A. Zawawi and I. B. Kennedy, “Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders”, Ain Shams Engineering Journal, vol. 11, no. 1, pp. 225-230, 2020. [Google Scholar] [Crossref]

21. D. U. Silverthorn, Human Physiology (7th ed.). Boston: Pearson Education, 2013. [Google Scholar] [Crossref]

22. W. T. Griffith and J. W. Brosing, The Physics of Everyday Phenomena: A Conceptual Introduction to Physics (6th ed.). New York: Mc Graw Hill Higher Education, 2009. [Google Scholar] [Crossref]

23. A.W. Otieno and C. R. Mirman, “Machine vision applications within a manufacturing engineering technology program”, in Proceedings of the 2002 American Society for Engineering Education Annual Conference and Exposition, 2002, June, pp. 7.824. [Google Scholar] [Crossref]

24. O. Semeniuta, S. Dransfeld, K. Martinsen and P. Falkman, “Towards increased intelligence and automatic improvement in industrial vision systems”, Procedia CIRP, vol. 67, pp. 256-261, 2018. [Google Scholar] [Crossref]

25. A. Khan, C. Mineo, G. Dobie, C. Macleod and G. Pierce, “Vision guided robotic inspection for parts in manufacturing and remanufacturing industry”, Journal of Remanufacturing, vol. 11, pp. 49-70, 2021. [Google Scholar] [Crossref]

26. A. G. Entrop and A. Vasenev, “Infrared drones in the construction industry: Designing a protocol for building thermography procedures”, Energy Procedia, vol. 132, pp. 63-68, 2017. [Google Scholar] [Crossref]

27. M. Razani, A. Parkhimchyk and N. Tabatabaei, “Lock-in thermography using a cellphone attachment infrared camera”, AIP Advances, vol. 8, no. 3, pp. 035305, 2018. [Google Scholar] [Crossref]

28. F. Fam, N. Ismail, H. Yanto, D. D. Prastyo and B. P. Lau, “Lean manufacturing and overall equipment efficiency (OEE) in paper manufacturing and paper products industry”, Journal of Advanced Manufacturing Technology, vol. 12, no. 1(2), pp. 461-474, 2018. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles