Real-Time LEV Sensor Monitoring for Fume Hood Safety and Performance: A Case Study at the Department of Chemistry, Malaysia Headquarters

Authors

Aidil Fahmi Shadan

Malaysia Headquarters (Malaysia)

Muhammad Fazli Mad Saad

Malaysia Headquarters (Malaysia)

Muhammad Haniff M. Zahari

Malaysia Headquarters (Malaysia)

Muhammad Hafiz Abd Rahman

Malaysia Headquarters (Malaysia)

Article Information

DOI: 10.47772/IJRISS.2026.10100554

Subject Category: Health

Volume/Issue: 10/1 | Page No: 7192-7197

Publication Timeline

Submitted: 2026-01-31

Accepted: 2026-01-09

Published: 2026-02-17

Abstract

Fume hoods are primary engineering controls for reducing laboratory personnel exposure to hazardous airborne chemicals; however, their effectiveness can be compromised by delayed, manual, and inconsistent airflow monitoring that allows abnormal operating conditions to persist. This study reports the deployment and evaluation of an automated Local Exhaust Ventilation (LEV) monitoring system across 43 chemical fume hoods at the Department of Chemistry, Malaysia Headquarters. The system provided continuous, real-time monitoring of ventilation parameters and incorporated chemometric analysis using Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) to detect and classify operational anomalies. Performance was validated against handheld anemometer measurements (n = 215), showing strong agreement (R² = 0.98) and low mean error (0.012 m/s). Following implementation, anomaly detection lag decreased from an average of 14.5 hours to less than two minutes, and operational uptime increased to 99.5%. Optimized airflow control was associated with a 35% reduction in energy consumption. Cost–benefit analysis estimated a payback period of 2.2 years with projected annual savings of RM 274,250. User surveys indicated increased confidence in laboratory safety, system transparency, and compliance documentation. Overall, these findings support automated LEV monitoring as a practical approach to strengthening laboratory safety management, operational efficiency, and sustainability, with potential applicability to broader laboratory settings in Malaysia

Keywords

Automation, Chemical Laboratory, Fume Hood

Downloads

References

1. Che Hassan, N. H., Ismail, A. R., Makhtar, N. K., Sulaiman, M. A., Subki, N. S., & Hamzah, N. A. (2017). Safety and health practice among laboratory staff in Malaysian education sector. IOP Conference Series: Materials Science and Engineering, 257(1), 012004. https://doi.org/10.1088/1757-899X/257/1/012004 [Google Scholar] [Crossref]

2. Department of Occupational Safety and Health Malaysia. (2008). Guidelines on occupational safety and health for design, inspection, testing and examination of local exhaust ventilation system (LEV). Ministry of Human Resources, Malaysia. [Google Scholar] [Crossref]

3. Dzolin, S., Wan Ibrahim, W. A., Mahat, N. A., Ismail, D., & Shadan, A. F. (2023). Multi-trace metals determination of Peninsular Malaysia stingless bee honeys using inductively coupled plasma-optical emission spectrometry and chemometric techniques. Malaysian Journal of Analytical Sciences, 27(1), 216–230. [Google Scholar] [Crossref]

4. International Organization for Standardization. (2018). ISO 45001:2018: Occupational health and safety management systems—Requirements with guidance for use. ISO. [Google Scholar] [Crossref]

5. Kongoletos, J., Munden, E., Ballew, J., & Preston, D. J. (2021). Motion and sash height (MASH) alarms for efficient fume hood use. Scientific Reports, 11, Article 21541. https://doi.org/10.1038/s41598-021-00772-y [Google Scholar] [Crossref]

6. Mahat, N. A., Shadan, A. F., Juahir, H., & Sukono, S. (2023). Uncovering the fingerprints of gasoline residues: A chromatographic and chemometric analysis of burned matrices for forensic intelligence [Preprint]. SSRN. https://ssrn.com/abstract=4374083 [Google Scholar] [Crossref]

7. Shadan, A. F., Mahat, N. A., Wan Ibrahim, W. A., & Ariffin, Z. (2018). Provenance establishment of stingless bee honey using multi-element analysis in combination with chemometrics techniques. Journal of Forensic Sciences, 63(1), 80–85. https://doi.org/10.1111/1556-4029.13512 [Google Scholar] [Crossref]

8. Sukri, N. S., Safrin, N. S., Kedri, F. K., Hanie, N. I., & Sukri, M. A. (2023). Perception of safety intervention practices in the laboratory among students in higher education sector. BIO Web of Conferences, 73, 03015. https://doi.org/10.1051/bioconf/20237303015 [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles