Standardization of the Handling of Master Samples in Machining: Application of the PDCA Cycle and Lean Tools for Improving Traceability and Reducing Rework

Authors

Luz Angélica Cortes Madrigal

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Brandon Alexis Escamilla Pérez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Karla Sherlyn Soní Ramírez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Gloria Sandoval Méndez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Pedro Alberto Piñón Dominguez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Alejandra Segura Juárez

Instituto Tecnológico de Pachuca, Hidalgo (Mexico)

Article Information

DOI: 10.47772/IJRISS.2026.102500006

Subject Category: Education

Volume/Issue: 10/25 | Page No: 70-82

Publication Timeline

Submitted: 2026-10-14

Accepted: 2026-10-19

Published: 2026-11-14

Abstract

In precision machining of high-performance materials such as polytetrafluoroethylene (PTFE), customer specifications are frequently defined by physical master samples rather than detailed technical drawings. The absence of a formalized system for the approval, measurement, coding, storage, and digital registration of these samples generates measurement discrepancies between machining and quality inspection areas, lack of historical traceability, inconsistent nomenclature, and inadequate storage conditions. These deficiencies produce rework, time wastes, and difficulties in replicating orders, affecting productivity, costs, and customer satisfaction.
This work presents the design and implementation of a standardized system for the approval and storage of master samples in precision machining processes. The intervention was structured under the PDCA (Plan–Do–Check–Act) cycle and supported by Lean Manufacturing tools (5S and work standardization) and quality tools (Ishikawa diagram, Pareto diagram, and 5 Whys), in alignment with ISO 9001:2015 requirements, particularly clauses 8.5.2 and 8.5.3 related to identification, traceability, and control of customer property.
A baseline diagnosis quantified the initial problem: average inspection time of 45 minutes, CNC programming time of 120 minutes, complete traceability in only 35% of samples, eight monthly incidents related to measurement discrepancies or sample loss, and a 5S order level of 1.8/5. The system was implemented through the application of 5S in the inspection area, the creation of a unique nomenclature, the establishment of a digital repository for drawings and records, personnel training, and the use of the Part Submission Warrant (PSW) format.
After implementation, inspection time was reduced by 52.2% (to 21.5 minutes), CNC programming time decreased by 92.1% (to 9.5 minutes), traceability reached 100%, monthly incidents dropped by 87.5%, and the 5S order level improved to 4.6/5. The results demonstrate that the structured application of PDCA combined with Lean and quality tools constitutes an effective, low-cost, and replicable solution for reducing variability and improving traceability in the management of master samples in precision manufacturing environments, while strengthening compliance with ISO 9001:2015.

Keywords

master samples, PDCA, Lean Manufacturing, 5S, traceability, ISO 9001, precision machining, PTFE

Downloads

References

1. Antony, J., Psomas, E., Garza-Reyes, J. A., & Hines, P. (2020). Practical implications and future research agenda of lean manufacturing: A systematic literature review. Production Planning & Control, 32(11), 889–925. https://doi.org/10.1080/09537287.2020.1776410 [Google Scholar] [Crossref]

2. Bendigeri, T., You, B. H., & Song, I.-H. (2018). Implementing 5S principles on a manufacturing company, SPS Engineering: Case study. International Journal of Research in Engineering and Technology, 7(12), 59–64. https://doi.org/10.15623/ijret.2018.0712008 [Google Scholar] [Crossref]

3. Chiarini, A., & Cherrafi, A. (2023). Integrating ISO 9001 and Industry 4.0: An implementation guideline and PDCA model for manufacturing sector. Total Quality Management & Business Excellence, 34(13–14), 1629–1654. https://doi.org/10.1080/14783363.2023.2192916 [Google Scholar] [Crossref]

4. Dong, Y., & Li, L. (2025). The application practice of PDCA cycle in improving product quality. Frontiers in Business, Economics and Management, 19(2), 169–172. https://doi.org/10.54097/db53kn09 [Google Scholar] [Crossref]

5. International Organization for Standardization. (2015). ISO 9001:2015 Quality management systems — Requirements. ISO. [Google Scholar] [Crossref]

6. Islam, M. S., & Ahmed, S. (2024). Work standardization in lean manufacturing for improvement of production line performance in SME. Malaysian Journal on Composites Science and Manufacturing, 13(1), 68–81. https://doi.org/10.37934/mjcsm.13.1.6881 [Google Scholar] [Crossref]

7. Jonny. (2025). Reducing an Indonesian auto part production cycle time using the PDCA approach: A case study. Engineering, Technology & Applied Science Research, 15(1), 19690–19694. https://doi.org/10.48084/etasr.7712 [Google Scholar] [Crossref]

8. Kumar, S., Dhingra, A. K., & Singh, B. (2018). Kaizen selection for continuous improvement through VSM-Fuzzy-TOPSIS in small-scale enterprises: An Indian case study. Advances in Fuzzy Systems, 2018, Article 2723768. https://doi.org/10.1155/2018/2723768 [Google Scholar] [Crossref]

9. Liu, J., Cao, X., Zhou, H., Li, L., Liu, X., Zhao, P., & Dong, J. (2021). A digital twin-driven approach towards traceability and dynamic control for processing quality. Advanced Engineering Informatics, 50, 101395. https://doi.org/10.1016/j.aei.2021.101395 [Google Scholar] [Crossref]

10. Mares Castro, A., Becerra Rodríguez, M. B., Hernández Hernández, A., & Oliva Ramos, M. de L. (2025). Standardized work. In J. L. García Alcaraz, G. Cortés Robles, & A. Realyvásquez Vargas (Eds.), Lean manufacturing in Latin America: Concepts, methodologies and applications (pp. 29–54). Springer. https://doi.org/10.1007/978-3-031-70984-5_2 [Google Scholar] [Crossref]

11. Oleksiak, B., Żyszczyński, M., & Micor, K. (2025). 5S method usage for the improvement of production process in the manufacturing company. Management Systems in Production Engineering, 33(3), 354–361. https://doi.org/10.2478/mspe-2025-0033 [Google Scholar] [Crossref]

12. Purba, H. H., BismarMaulani, & Fathani, M. A. (2018). Improving quality by PDCA approach with the small group activity (SGA) concept: A case study in manufacturing industry. International Journal of Scientific Research in Engineering & Technology, 7(8), 639–644. [Google Scholar] [Crossref]

13. Rangel-Sánchez, M. Á., Urbina-González, J. de J., Carrera-Escobedo, J. L., Guirette-Barbosa, O. A., Murillo-Rodríguez, V. A., Celaya-Padilla, J. M., Durán-Muñoz, H. A., & Cruz-Domínguez, O. (2024). Enhancing scrap reduction in electric motor manufacturing for the automotive industry: A case study using the PDCA (Plan–Do–Check–Act) approach. Applied Sciences, 14(7), 2999. https://doi.org/10.3390/app14072999 [Google Scholar] [Crossref]

14. Realyvásquez Vargas, A., García Alcaraz, J. L., Satapathy, S., & Díaz-Reza, J. R. (2023). The PDCA cycle for industrial improvement: Applied case studies. Springer. https://doi.org/10.1007/978-3-031-26805-2 [Google Scholar] [Crossref]

15. Shahriar, M. M., Parvez, M. S., Islam, M. A., & Talapatra, S. (2022). Implementation of 5S in a plastic bag manufacturing industry: A case study. Cleaner Engineering and Technology, 8, 100488. https://doi.org/10.1016/j.clet.2022.100488 [Google Scholar] [Crossref]

16. Simões, T. A. P., & Ferrarezi Junior, E. (2025). Quality management in the industry: A comprehensive view of PDCA. Revista Interface Tecnológica, 22(1), 723–734. https://doi.org/10.31510/infa.v22i1.1852 [Google Scholar] [Crossref]

17. Singh, J., & Gandhi, S. K. (2024). Benefits using PDCA cycle of continuous improvement in manufacturing industry – a case study. International Journal of Management Concepts and Philosophy, 17(1), 83–97. https://doi.org/10.1504/IJMCP.2024.135088 [Google Scholar] [Crossref]

18. Subburaman, K. (2019). A case study of 5S implementation in inspection process. International Journal of Mechanical and Production Engineering Research and Development, 9(3), 1515–1524. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles