Sustainable Industrial Engineering: Integrating Innovation, Production Efficiency and Human Well-Being from an International Perspective
Authors
Manuel Horacio Gutiérrez Martínez
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Héctor Luis Gutiérrez Martínez
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Enrique de Jesús Mohedano Torres
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Pachuca de Soto, Hidalgo (Mexico)
Article Information
DOI: 10.47772/IJRISS.2026.102500020
Subject Category: Engineering & Technology
Volume/Issue: 10/25 | Page No: 360-375
Publication Timeline
Submitted: 2026-10-26
Accepted: 2026-10-31
Published: 2026-11-16
Abstract
Industrial engineering faces the challenge of improving the productivity of manufacturing organizations without neglecting its environmental and human effects. This article analyzes, from an international perspective, the relationship between continuous improvement, environmental sustainability, technological innovation and human well-being in manufacturing, with the purpose of proposing a framework that integrates these dimensions. A structured literature review was carried out of 25 documents published between 2017 and 2026, obtained from Google Scholar, SciELO, Redalyc and scientific publisher portals. The documents come from Europe, Latin America including Mexico, Asia and Africa, in addition to international reviews, and were organized into four thematic axes: continuous improvement and productivity; environmental sustainability and circular economy; technological innovation; and human-centered manufacturing. The dimensions that each one measures were identified. The results show that the evaluation of improvements focuses on productivity: the environmental dimension is mentioned in 17 of the 24 articles analyzed, but only 3 measure it with their own data; well-being and safety are measured in 2, and staff participation in none. Based on these findings, the People-Centered Sustainable Industrial Engineering Framework (MIISCP) is proposed, composed of five phases: process diagnosis, identification of opportunities, design of alternatives, implementation and monitoring, and standardization and continuous improvement that simultaneously evaluate production, environment, and people criteria. The framework constitutes a conceptual proposal that requires validation through case studies.
Keywords
Industrial Engineering; Sustainable Manufacturing; Continuous Improvement; Human-Centered Manufacturing; Literature Review.
Downloads
References
1. Alva Rocha, L. A., Cervantes Zubirías, G., Méndez Flores, M. M., Morales Rodríguez, M. A., & Sandoval Flores, G. (2024). Implementation of continuous improvement applied to the production process of the sustainable recycling company in Reynosa, Tamaulipas. RIDE Ibero-American Journal for Educational Research and Development, 14(28). https://doi.org/10.23913/ride.v14i28.1863 [Google Scholar] [Crossref]
2. Breque, M., De Nul, L., & Petridis, A. (2021). Industry 5.0: Towards a sustainable, human-centric and resilient European industry. Comisión Europea, Dirección General de Investigación e Innovación. https://research-and-innovation.ec.europa.eu/knowledge-publications-tools-and-data/publications/all-publications/industry-50_en [Google Scholar] [Crossref]
3. Brito, M., Ramos, A. L., Carneiro, P., & Gonçalves, M. A. (2018). Integration of lean manufacturing and ergonomics in a metallurgical industry. International Journal of Occupational and Environmental Safety, 2(2), 21–31. https://doi.org/10.24840/2184-0954_002.002_0003 [Google Scholar] [Crossref]
4. Castagnoli, R., Cugno, M., Maroncelli, S., & Cugno, A. (2024). A new research agenda for human-centric manufacturing: A systematic literature review. IEEE Transactions on Engineering Management, 71, 15236–15253. https://doi.org/10.1109/TEM.2024.3479775 [Google Scholar] [Crossref]
5. Chugani, N., Kumar, V., Garza-Reyes, J. A., Rocha-Lona, L., & Upadhyay, A. (2017). Investigating the green impact of Lean, Six Sigma and Lean Six Sigma: A systematic literature review. International Journal of Lean Six Sigma, 8(1), 7–32. https://doi.org/10.1108/IJLSS-11-2015-0043 [Google Scholar] [Crossref]
6. Dey, P. K., Malesios, C., Chowdhury, S., Saha, K., Budhwar, P., & De, D. (2022). Adoption of circular economy practices in small and medium-sized enterprises: Evidence from Europe. International Journal of Production Economics, 248, Artículo 108496. https://doi.org/10.1016/j.ijpe.2022.108496 [Google Scholar] [Crossref]
7. Díaz Martínez, M. A., Fuentes Rubio, Y. A., Román Salinas, R. V., Grande Ramírez, J. R., & Delgado Maciel, J. (2026). A systematic review of Industry 5.0 and sustainability in manufacturing: Clustering of concepts, characteristics, and technological enablers. Discover Sustainability, 7, Artículo 175. https://doi.org/10.1007/s43621-025-02453-6 [Google Scholar] [Crossref]
8. Elemure, I., Dhakal, H. N., Leseure, M., & Radulovic, J. (2023). Integration of lean green and sustainability in manufacturing: A review on current state and future perspectives. Sustainability, 15(13), Artículo 10261. https://doi.org/10.3390/su151310261 [Google Scholar] [Crossref]
9. Ferrazzi, M., Frecassetti, S., Bilancia, A., & Portioli-Staudacher, A. (2025). Investigating the influence of lean manufacturing approach on environmental performance: A systematic literature review. The International Journal of Advanced Manufacturing Technology, 136, 4025–4044. https://doi.org/10.1007/s00170-024-13215-5 [Google Scholar] [Crossref]
10. González-Hernández, I. J., & Granillo-Macías, R. (2020). Competencies of the industrial engineer in Industry 4.0. Electronic Journal of Educational Research, 22, e30. https://doi.org/10.24320/redie.2020.22.e30.2750 [Google Scholar] [Crossref]
11. Gualtieri, L., Palomba, I., Merati, F. A., Rauch, E., & Vidoni, R. (2020). Design of human-centered collaborative assembly workstations for the improvement of operators' physical ergonomics and production efficiency: A case study. Sustainability, 12(9), Artículo 3606. https://doi.org/10.3390/su12093606 [Google Scholar] [Crossref]
12. Huerta Estévez, A. (2021). Reduction of in-line material handling in a car assembly plant through the application of lean manufacturing. Industrial Engineering, (40), 49–60. https://doi.org/10.26439/ing.ind2021.n40.4880 [Google Scholar] [Crossref]
13. Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221–232. https://doi.org/10.1016/j.resconrec.2017.09.005 [Google Scholar] [Crossref]
14. Leng, J., Sha, W., Wang, B., Zheng, P., Zhuang, C., Liu, Q., Wuest, T., Mourtzis, D., & Wang, L. (2022). Industry 5.0: Prospect and retrospect. Journal of Manufacturing Systems, 65, 279–295. https://doi.org/10.1016/j.jmsy.2022.09.017 [Google Scholar] [Crossref]
15. Logesh, B., & Balaji, M. (2021). Experimental investigations to deploy green manufacturing through reduction of waste using lean tools in electrical components manufacturing company. International Journal of Precision Engineering and Manufacturing-Green Technology, 8(2), 365–374. https://doi.org/10.1007/s40684-020-00216-4 [Google Scholar] [Crossref]
16. Loza-Hernández, L., & Arroyo, P. (2023). Actions to Foster the Circular Economy: A Case Study of Multinational Manufacturers in the Automotive and Fast Moving Consumer Goods Sectors in Mexico. Acta Universitaria, 33, 1–20. https://doi.org/10.15174/au.2023.3798 [Google Scholar] [Crossref]
17. Minh, N. D., Nguyen, N. D., & Cuong, P. K. (2019). Applying lean tools and principles to reduce cost of waste management: An empirical research in Vietnam. Management and Production Engineering Review, 10(1), 37–49. https://doi.org/10.24425/mper.2019.128242 [Google Scholar] [Crossref]
18. Ortiz Porras, J. E., Bancovich Erquínigo, A. M., Candia Chávez, T. C., Huayanay Palma, L. M., Moore Torres, R. K., & Tinoco Gómez, O. R. (2023). Green Lean Six Sigma model for waste reduction of raw material in a nectar manufacturing company of Lima, Peru. Journal of Industrial Engineering and Management, 16(2), 169–185. https://doi.org/10.3926/jiem.4916 [Google Scholar] [Crossref]
19. Reiman, A., Kaivo-oja, J., Parviainen, E., Takala, E.-P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the Industry 4.0 context – A scoping review. Technology in Society, 65, Artículo 101572. https://doi.org/10.1016/j.techsoc.2021.101572 [Google Scholar] [Crossref]
20. Salwin, M., Pszczółkowska, K., Pałęga, M., & Kraslawski, A. (2023). Value-stream mapping as a tool to improve production and energy consumption: A case study of a manufacturer of industrial hand tools. Energies, 16(21), Artículo 7292. https://doi.org/10.3390/en16217292 [Google Scholar] [Crossref]
21. Schoeman, Y., Oberholster, P., & Somerset, V. (2021). Value stream mapping as a supporting management tool to identify the flow of industrial waste: A case study. Sustainability, 13(1), Artículo 91. https://doi.org/10.3390/su13010091 [Google Scholar] [Crossref]
22. Singh, J., & Khaira, K. S. (2026). Minimizing carbon emissions, energy consumption, and waste in manufacturing: A green manufacturing approach. International Journal on Interactive Design and Manufacturing, 20(10), 5529–5557. https://doi.org/10.1007/s12008-026-02624-3 [Google Scholar] [Crossref]
23. Snyder, H. (2019). Literature review as a research methodology: An overview and guidelines. Journal of Business Research, 104, 333–339. https://doi.org/10.1016/j.jbusres.2019.07.039 [Google Scholar] [Crossref]
24. Tortorella, G. L., & Fettermann, D. (2018). Implementation of Industry 4.0 and lean production in Brazilian manufacturing companies. International Journal of Production Research, 56(8), 2975–2987. https://doi.org/10.1080/00207543.2017.1391420 [Google Scholar] [Crossref]
25. UNESCO. (2021). Engineering for sustainable development: Delivering on the Sustainable Development Goals. UNESCO. https://unesdoc.unesco.org/ark:/48223/pf0000375644 [Google Scholar] [Crossref]
26. Vasconcelos, D. C., Viana, F. E., & Barros Neto, J. P. (2019). Lean and green: The contribution of lean production and environmental management to the waste reduction. Revista de Administração da UFSM, 12(2), 365–383. https://doi.org/10.5902/1983465921750 [Google Scholar] [Crossref]
27. Veseli, A., Bajraktari, A., & Trajkovska Petkoska, A. (2024). The implementation of lean manufacturing on zero waste technologies in the food processing industry: Insights from food processing companies in Kosovo and North Macedonia. Sustainability, 16(14), Artículo 6016. https://doi.org/10.3390/su16146016 [Google Scholar] [Crossref]
28. Womack, J. P., & Jones, D. T. (1996). Lean thinking: Banish waste and create wealth in your corporation. Simon & Schuster. [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- The Impact Of UI/UX Design on User Trust and Task Completion in Civic Tech Platforms
- Solar Cell Photovoltaic Model Shell Sp 75
- Development of an Intelligent Traffic Management System to Address Visibility Obstruction at Urban Intersections: A Case Study of Ibadan Metropolis
- Optimum Placement of Facts Devices on an Interconnected Power Systems Using Particle Swarm Optimisation Technique
- Assessing Construction Transformation and Implication on Future Production Flow System