Assessment of Load Characteristics in Short-Circuit Studies of Distribution Substations

This paper evaluates the influence of electrical loads on the distribution of currents under both normal and fault operating conditions in distribution substations. Static and dynamic loads are modeled using equivalent impedance components, where dynamic loads are represented by the Conventional Load Model, Exponential Load Model, Polynomial Load Model, and Comprehensive Load Model. The Newton-Raphson method is applied for power flow analysis to determine current distribution under normal operating states. In addition, the IEC short-circuit calculation method is adopted to analyze fault current distribution in the entire system under short-circuit conditions. A five-bus test system, in which the load can switch between static and composite (static + dynamic), is proposed to investigate current distribution under different operating conditions. Simulations are performed in ETAP for both normal and fault modes, considering static loads and composite loads. The results highlight current distribution across the system, clarifying the ability of dynamic loads to contribute to fault currents during short-circuit conditions, unlike static loads. The contributions of this study provide insights for designers and operators in understanding how electrical load characteristics affect the performance of protection devices in distribution substations.

Composed Load, Electrical Load Model

1. S. Subedi, H. Zhou, H. Karki, and B. Poudel, “Aggregate data-driven dynamic modeling of active distribution networks with DERs for voltage stability studies,” IET Renewable Power Generation, vol. 18, no. 6, pp. 678–689, Jun. 2024. [Google Scholar] [Crossref]

2. Y. Liu, Z. Guo, and X. Zhang, “Real-time short-circuit current calculation in electrical distribution systems considering the uncertainty of renewable resources and electricity loads,” Applied Sciences, vol. 14, no. 23, p. 11001, 2024. [Google Scholar] [Crossref]

3. S. Hill, A. Hughes, and P. Clarkson, “Improved load modelling for emerging distribution system assessments,” CIRED Open Access Proceedings Journal, vol. 2021, no. 1, pp. 1301–1305, 2021. [Google Scholar] [Crossref]

4. D. Del Giudice, F. Viola, and M. Rinaldi, “Definition of static and dynamic load models for grid studies of electric vehicles connected to fast charging stations,” arXiv preprint arXiv:2302.03943, 2023. [Google Scholar] [Crossref]

5. D. Madjovski, I. Dumancic, and L. Petkovska, “Dynamic modeling of distribution power systems with renewable generation for stability analysis,” Energies, vol. 17, no. 20, p. 5178, Oct. 2024. [Google Scholar] [Crossref]

6. Bokhari, R. Billinton, and W. Xu, “Experimental determination of the ZIP coefficients for modern residential, commercial, and industrial loads,” IEEE Trans. Power Delivery, vol. 29, no. 3, pp. 1447–1455, Jun. 2014. [Google Scholar] [Crossref]

7. J. Li, H. Zhao, and Y. Wei, “A practical short-circuit current calculation method for renewable energy plants based on single-machine multiplication,” Electricity, vol. 6, no. 1, p. 7, 2025. [Google Scholar] [Crossref]

8. Niersbach, A. Ghourabi, and A. Hanson, “Advanced modelling of inverter-based generators for short-circuit current calculations based on IEC 60909-0:2016,” in Proc. CIRED Conf., 2019. [Google Scholar] [Crossref]

9. M. S. Nizam, R. Islam, and M. T. Rahman, “Comparison of peak short-circuit current between traditional and renewable energy sources,” in Proc. IET Conf. on Renewable Power Generation, 2023. [Google Scholar] [Crossref]

10. T. Riedlinger, P. Wintzek, and M. Zdrallek, “Development of a new modelling concept for power flow calculations across voltage levels,” Electricity, vol. 5, no. 2, p. 10, 2024. [Google Scholar] [Crossref]

11. O. D. Montoya, A. Rajagopalan, and F. Moya, “Optimal capacitor placement and its effect on distribution network operation,” Mathematics, vol. 10, no. 16, p. 1600, 2022. [Google Scholar] [Crossref]

12. H. Jayasinghe, K. Gunawardane, and R. Nicholson, “Applications of electrical load modelling in digital twins of power systems,” Energies, vol. 18, no. 4, p. 775, Feb. 2025. [Google Scholar] [Crossref]

13. T. Huang, L. Li, and K. Zhang, “Optimal operation of renewable energy bases considering short-circuit ratio and transient overvoltage constraints,” Energies, vol. 18, no. 5, p. 1256, Mar. 2025. [Google Scholar] [Crossref]

14. R. Zhang, K. Qu, and C. Zhao, “Robust distribution network reconfiguration using mapping-based column-and-constraint generation,” arXiv preprint arXiv:2505.24677, 2025. [Google Scholar] [Crossref]

15. Abdelaziz, A. El-Dib, and R. El-Shatshat, “Distribution load flow methods for modern distribution systems: A review,” Electric Power Systems Research, vol. 163, pp. 616–627, Oct. 2018. [Google Scholar] [Crossref]

16. H. Saadat and D. Manz, “Newton-Raphson power flow for distribution systems with distributed generation,” Int. J. of Electrical Power & Energy Systems, vol. 78, pp. 802–813, 2016. [Google Scholar] [Crossref]

17. Y. Sun, J. Zhang, and L. Wang, “Probabilistic load flow calculation of AC/DC hybrid system based on cumulant method,” arXiv preprint arXiv:2201.12571, 2022. [Google Scholar] [Crossref]

18. M. Yang, R. Xie, and Y. Zhang, “Robust microgrid dispatch with real-time energy sharing and endogenous uncertainty,” arXiv preprint arXiv:2403.15219, 2024. [Google Scholar] [Crossref]

19. L. Yang, H. Yang, and X. Cao, “Distributionally robust frequency-constrained microgrid scheduling towards seamless islanding,” arXiv preprint arXiv:2401.03381, 2024. [Google Scholar] [Crossref]

20. K. Hoseinzadeh and F. Blaabjerg, “A novel control technique for on-load tap changer to enlarge reactive power capability of wind power plants,” IET Generation, Transmission & Distribution, vol. 16, pp. 2928–2938, 2022. [Google Scholar] [Crossref]

21. K. Yoon, J. Shin, and T. Nam, “Operation method of on-load tap changer on main transformer considering reverse power flow in distribution system connected with high penetration of photovoltaic system,” Energies, vol. 15, no. 17, p. 6473, 2022. [Google Scholar] [Crossref]

22. H. Luo, J. Wu, and Z. Wang, “A dynamic reconfiguration model and method for load balancing in the snow-shaped distribution network,” Frontiers in Energy Research, vol. 12, p. 1361559, 2024. [Google Scholar] [Crossref]

23. E. Zarate-Perez, J. Silva, and F. Lopez, “Assessment and optimization of residential microgrid based on PV, wind & BESS using GA and ACO,” Processes, vol. 13, no. 3, p. 740, 2025. [Google Scholar] [Crossref]

24. S. Phommixay, M. Doumbia, and D. Lupien St-Pierre, “Review on the cost optimization of microgrids via particle swarm optimization,” Energy Systems, vol. 11, pp. 445–468, 2020. [Google Scholar] [Crossref]

25. ETAP, ETAP Power System Analysis User Guide – Load Flow and Short-Circuit Modules, Operation Technology Inc., 2020. [Google Scholar] [Crossref]

• An Adaptive Joint Filtering Approach to Wireless Relay Network for Transmission Rate Maximization
• IoT-Integrated Mercury Substance Detection System for Cosmetic Product Safety
• Design and Implementation of Solar PV-Based Railway Microgrid for Linke Hofmann Busch Coaches
• Cost Control Techniques on Civil Engineering Projects in Oyo State, Nigeria
• Strength and Predictive Modeling of Corn Cob Ash Blended Concrete Using Multi-Output Artificial Neural Network Approach