Pneumatic Conveying Study of Rice Husk Based on Laboratory Trails and Its Assessment.

A conveying system of any kind is used to transport a material from one source place to destination or receiving place. For the chosen method of pneumatic conveying, air is used as the transport medium. It is applicable to most fine powder to granular materials, be they in that form naturally or have to be pulverised or crushed. In this system, energy is needed to accelerate the material from rest, to lift it as required and to overcome the losses due to friction. Rice husk is by-product which results from paddy, the husk is removed by friction as the paddy grains pass between two abrasive surfaces that move at different speeds. It has been used as building material, fertilizer, insulation material, or fuel. Combustion of rice hulls produces rice husk ash (RHA) which is a potential source of amorphous reactive silica. Most of the ash is used in the production of Portland cement. The ash is a very good thermal insulation material. Rice husk though been not easily transportable material, however, certain operational sequences, precautions at feeding zone and with sufficient motive force (flow and pressure) rice husk can be transported which was resulted in Conveying Flow lab tests. Rise husk has high silica content and is abrasive, the conveying velocities are keen to investigate. This paper explains the setup used for this trials, characterization of material used as feed, conveying parameters achieved.

Conveying Systems, Rice Husk Lean phase Danse phase trial

1. C.R. Bemrose, J. Bridgwater, A review of attrition and attrition test methods, Powder Technol. 49 (1987) 97–126. doi:10.1016/0032-5910(87)80054-2. [Google Scholar] [Crossref]

2. G.K. Reynolds, J.S. Fu, Y.S. Cheong, M.J. Hounslow, A.D. Salman, Breakage in granulation: A review, Chem. Eng. Sci. 60 (2005) 3969–3992. doi:10.1016/j.ces.2005.02.029. [Google Scholar] [Crossref]

3. I.M. Hutchings, Mechanisms of wear in powder technology: A review, Powder Technol. 76 (1993) 3–13. doi:10.1016/0032-5910(93)80035-9. [Google Scholar] [Crossref]

4. Research data and analytics from own sources and laboratory. [Google Scholar] [Crossref]

• The Impact Of UI/UX Design on User Trust and Task Completion in Civic Tech Platforms
• Solar Cell Photovoltaic Model Shell Sp 75
• Development of an Intelligent Traffic Management System to Address Visibility Obstruction at Urban Intersections: A Case Study of Ibadan Metropolis
• Optimum Placement of Facts Devices on an Interconnected Power Systems Using Particle Swarm Optimisation Technique
• Assessing Construction Transformation and Implication on Future Production Flow System