Developing and Evaluating the Motorcycle Illumination and Signaling System Trainer: A Narrative Review of Curriculum Readiness and Technology Acceptance in Automotive TVET

The rapid integration of complex automotive electronics requires a substantial transformation in technical-vocational training methods. Within motorcycle servicing education, traditional, paper-based instructions and fully enclosed vehicle benches often fail to convey "invisible" electronic logic, creating a distinct "theory-practice gap" while increasing student anxiety. This research paper provides a conceptual and narrative assessment of the instructional and curricular readiness of Technical and Vocational Education and Training (TVET) programs for advanced automotive electrical systems. By integrating the Technology Acceptance Model (TAM) with experiential learning principles, this paper evaluates preparation across four core dimensions: policy direction, institutional capacity, human capability, and curricular alignment. The study reviews research, national policy directives, and institutional academic audits published from 2020 to 2026. The findings indicate that while national training frameworks, such as the Technical Education and Skills Development Authority (TESDA) Competency Standards for Automotive Servicing NC II, emphasize advanced electrical diagnostics, actual classroom implementation remains constrained. Many provincial and rural campuses continue to struggle with severe equipment scarcity, outdated manual-based tracking, and uneven instructor readiness regarding modern circuit geometry. This paper proposes a cohesive framework for deploying customized, transparent training simulators to enhance institutional capacity, reduce cognitive load, and boost behavioral intentions to adopt technical innovation. Ultimately, the integration of specialized, localized simulators represents not merely an academic reform, but a strategic progression towards sustainable workforce development and national qualification readiness.

Automotive pedagogy, curriculum readiness

1. Abad, J. M. (2025). Competency assessment metrics in automotive technician certification. Philippine Journal of TVET Innovation, 19(1), 45–59. [Google Scholar] [Crossref]

2. Ahmad, S., & Wrahatnolo, T. (2024). Modularity in vocational trainer kits: Aligning automotive technology education with modern electronics standards. Journal of Vocational Education Studies, 12(1), 88–102. [Google Scholar] [Crossref]

3. Albertz, A., & Pilz, M. (2025). Green alignment, green vocational education and training, green skills and related subjects: A literature review on actors, contents and regional contexts. International Journal of Training and Development, 29(2), 243–254. [Google Scholar] [Crossref]

4. Al-Emran, M., & Granić, A. (2024). Technology Acceptance Model (TAM) in the 2020s: A systematic review of extensions, modifications, and pedagogical utility. Educational Technology Review, 51(2), 114–132. [Google Scholar] [Crossref]

5. Almerich, G., Suárez-Rodríguez, J., Díaz-García, I., & Orellana, N. (2020). The relation between 21st-century skills and digital competence in teachers. Computers & Education, 155, Article 103934. [Google Scholar] [Crossref]

6. Alqahtani, M. (2023). Multimedia integration and virtual demonstrations in technical vocational subjects: Enhancing procedural clarity in culinary education. Journal of Vocational Education and Training, 75(3), 412–430. [Google Scholar] [Crossref]

7. Andal, M. C., Reyes, D. F., & Macasaet, L. E. (2022). Assessing the technological pedagogical content knowledge (TPACK) of TVL teachers in public senior high schools. Philippine Journal of Vocational Studies, 16(1), 45–59. [Google Scholar] [Crossref]

8. Adnan, A. H. M., Rahmat, A. M., Mohtar, N. M., & Anuar, N. (2021). Industry 4.0 critical skills and career readiness of ASEAN TVET tertiary students in Malaysia, Indonesia and Brunei. Journal of Physics: Conference Series, 1793(1), Article 012004. [Google Scholar] [Crossref]

9. Aquino, S. M. (2025). Digital resource utilization and mastery of Minimum Essential Learning Competencies (MELCs) in secondary home economics. Journal of Home Economics Education, 22(2), 89–103. [Google Scholar] [Crossref]

10. Azman, A. U. B., Jamal, A. H. B. M., & Ching, Y. S. (2025). Integrating electric vehicle technology into automotive TVET programmes in Malaysia: A review of curriculum readiness. International Journal of Research and Innovation in Social Science, 9(10), 6280–6290. [Google Scholar] [Crossref]

11. Azarcon, J. L., & Buniel, R. M. (2025). Digital pedagogy upskilling programs for vocational instructors in Surigao del Sur: An impact evaluation. Caraga Regional Research Journal, 14(1), 62–78. [Google Scholar] [Crossref]

12. Baharuddin, S., Iqbal, M. S., & Ibrahim, N. (2024). TVET education for community education 5.0 in Malaysia. Semarak International Journal of Innovation in Learning and Education, 4(1), 27–41. [Google Scholar] [Crossref]

13. Baker, L. C. (2023). Theoretical foundations of experiential learning in industrial and technical training contexts. Educational Psychology Review, 35(3), 204–219. [Google Scholar] [Crossref]

14. Balikas, R. D. (2026). Industry-standard mock assessments and student readiness in mechanical disciplines. Journal of Technical Qualifications, 14(1), 56–70. [Google Scholar] [Crossref]

15. Bangayan, E. T., Corpuz, L. A., & Agcaoili, J. M. (2025). Digital tool integration and the development of technical core competencies among pre-service TVL educators. Journal of Vocational Teacher Education, 20(2), 145–160. [Google Scholar] [Crossref]

16. Basri, A. Q., et al. (2025). A potential electric vehicle curriculum development argument in Malaysia based on database analysis: A review. Cogent Education, 12(1), Article 2453268. [Google Scholar] [Crossref]

17. Bertillo, M. K., Francisco, O. R., & Solis, E. J. (2025). Digitally enriched professional development programs and learner motivation in senior high school cookery. Philippine Educational Quarterly, 53(1), 74–89. [Google Scholar] [Crossref]

18. Brown, T. J. (2023). Tactile learning interventions and long-term memory formation in engineering laboratories: A meta-analysis. Journal of Engineering Education, 112(2), 145–163. [Google Scholar] [Crossref]

19. Cabello, A. V. (2022). Instructional continuity through self-directed digital learning: Experiences of technology and livelihood education teachers. Journal of Pedagogical Research, 6(4), 112–126. [Google Scholar] [Crossref]

20. Cabero-Almenara, J., & Llorente-Cejudo, C. (2020). Covid-19: Transforming the digital competence of vocational training teachers. Journal of New Approaches in Educational Research, 9(2), 150–161. [Google Scholar] [Crossref]

21. Cacho, R. A., & Ronda, M. K. (2021). Digital competence levels and instructional challenges among Home Economics teachers in Region Caraga. Mindanao Educational Review, 13(2), 104–119. [Google Scholar] [Crossref]

22. Capilitan, H. F. (2024). Mitigating conceptual errors in circuit diagnostics among electrical students via transparent instructional media. Mindanao Journal of Vocational Instruction, 17(2), 102–116. [Google Scholar] [Crossref]

23. Catherine, O., Vivian, B., & Christiana, K. (2025). Competency mastery in apparel design: Shifting from theoretical testing to output-based evaluation. Journal of Fashion Education and Technology, 21(1), 45–59. [Google Scholar] [Crossref]

24. Chen, X., & Wang, Y. (2023). Behavioral Intention, technology readiness, and eventual task mastery among vocational apprentices. Computers & Education, 198, Article 104762. [Google Scholar] [Crossref]

25. Clarke, E. R. (2024). Immersive simulators versus vehicle benches: A longitudinal study of skill degradation in automotive mechanics. Vocational Training Quarterly, 46(3), 210–225. [Google Scholar] [Crossref]

26. Commission on Higher Education. (2020). Policies and guidelines on the implementation of appropriate instructional media in technical courses (CHED Memorandum Order No. 10, series of 2020). CHED Central Office. [Google Scholar] [Crossref]

27. Darling-Hammond, L., Hyler, M. E., & Gardner, M. (2017). Effective teacher professional development. Learning Policy Institute. [Google Scholar] [Crossref]

28. Davis, F. D. (1989). Perceived usefulness, perceived ease of use, and user acceptance of information technology. MIS Quarterly, 13(3), 319–340. https://doi.org/10.2307/249008 [Google Scholar] [Crossref]

29. Dela Cruz, M. T. (2024). Technological infrastructure deficits and instructional resilience in rural TVL schools. Philippine Journal of Educational Technology, 11(3), 201–216. [Google Scholar] [Crossref]

30. De Leon, J. M. (2021). National certification readiness and the alignment of instructional tools in Philippine senior high schools. Philippine Journal of Education, 99(4), 301–315. [Google Scholar] [Crossref]

31. Department of Education. (2020). The Department of Education strategic ICT framework: Sustaining digital pedagogy amidst educational shifts. DepEd Central Office. [Google Scholar] [Crossref]

32. Dimaculangan, G. B. (2025). The psychology of tech-readiness: How the sense of ownership influences tool adoption in TVET. Journal of Vocational Behavior and Learning, 21(1), 78–92. [Google Scholar] [Crossref]

33. Dube, S., & Phiri, M. (2024). Digital platform adaptability and the efficacy of technical-vocational training delivery in resource-constrained environments. African Journal of Vocational Education, 32(1), 85–99. [Google Scholar] [Crossref]

34. Dumlao, P. S. (2022). Localizing instructional hardware for industrial technicians: A cost-effective paradigm for developing economies. Asian Journal of Vocational Education, 15(3), 114–129. [Google Scholar] [Crossref]

35. Empimo, G. F. (2025). Creative preparedness and instructional innovation in cookery subjects through digital technology adoption. Journal of Technical-Vocational Education Innovation, 18(1), 114–128. [Google Scholar] [Crossref]

36. Enriquez, A. L. (2024). Technical evaluations of custom-built training simulators in regional public colleges. Journal of Educational Facilities and Media, 29(2), 143–158. [Google Scholar] [Crossref]

37. Farrah, M. K. (2024). The role of structural willingness and technological acceptance in psychomotor skill execution. International Journal of Training Research, 22(1), 40–55. [Google Scholar] [Crossref]

38. Foster, D. R., & Grant, S. T. (2025). Operationalizing Kolb’s learning cycles in automotive technician development. Vocational and Technical Education Journal, 40(2), 167–181. [Google Scholar] [Crossref]

39. Fullan, M. (2007). The new meaning of educational change (4th ed.). Teachers College Press. [Google Scholar] [Crossref]

40. Fullan, M. (2020). Leading in a culture of change (Updated ed.). Jossey-Bass. [Google Scholar] [Crossref]

41. Ghomi, M., & Redecker, C. (2019). Digital competence of vocational teachers: A European comparative study using DigCompEdu. International Journal of Vocational Education and Training, 27(1), 74–88. [Google Scholar] [Crossref]

42. Gupta, R., & Lee, J. S. (2023). Cognitive synthesis and circuit complexity: Explaining the diagnostic failures of automotive trainees. Journal of Mechanical Systems Education, 18(4), 312–327. [Google Scholar] [Crossref]

43. Hargreaves, A., & Shirley, D. (2019). Leading from the middle: Spreading learning, well-being, and identity across schools. Council of Ontario Directors of Education. [Google Scholar] [Crossref]

44. Harper, T. J., & White, L. M. (2024). Gamified educational modules and student participation metrics in culinary arts curricula. New Zealand Journal of Hospitality and Vocational Education, 15(2), 102–117. [Google Scholar] [Crossref]

45. Henderson, G. F. (2024). Interfaces, interactive layouts, and cognitive load in vocational mechanics training. European Journal of Training and Development, 48(1), 45–61. [Google Scholar] [Crossref]

46. Hoffman, M. A. (2024). Deconstructing the theory-practice gap in integrated automotive circuit repair. Technical Education Quarterly, 41(3), 189–203. [Google Scholar] [Crossref]

47. Hunter, A., Griller Clark, H., Mason-Williams, L., & Gagnon, J. C. (2022). Curriculum, instruction, and promoting college and career readiness for incarcerated youth: A literature review. American Journal of Orthopsychiatry, 92(4), 418–431. [Google Scholar] [Crossref]

48. Ifenthaler, D., & Schweinbenz, V. (2016). The acceptance of tablet-PCs in vocational education: A structural equation modeling approach. Computers in Human Behavior, 60, 363–374. [Google Scholar] [Crossref]

49. International Energy Agency. (2023). Global EV outlook 2023: Executive summary. IEA. [Google Scholar] [Crossref]

50. International Energy Agency. (2024). Global EV outlook 2024: Trends in electric cars. IEA. [Google Scholar] [Crossref]

51. International Labour Organization. (2021). Regional study on green jobs policy readiness in ASEAN: Final report. ASEAN Secretariat. [Google Scholar] [Crossref]

52. Instefjord, E. J., & Munthe, E. (2017). Educating digitally competent teachers: A study of integration of ICT in teacher education. Teaching and Teacher Education, 67, 37–45. [Google Scholar] [Crossref]

53. Ismail, A., Syed-Abdullah, S. I., Sulaiman, T., & Mohd Puad, M. H. (2025). The integration of green technology elements in the curriculum of industrial training at Malaysian vocational colleges. International Journal of Education, 17(2), 88–104. [Google Scholar] [Crossref]

54. Department of Skills Development. (2022). Annual report - Department of Skills Development. Ministry of Human Resources Malaysia. [Google Scholar] [Crossref]

55. Jondra, I. W., & Sugiarta, I. N. (2021). Teaching motorcycle electrical systems in Southeast Asia: Designing localized simulator boards. ASEAN Journal of Engineering Education, 8(2), 103–117. [Google Scholar] [Crossref]

56. Kim, H. J., Cho, S. Y., & Park, L. M. (2022). Expanding the boundaries of PEOU: Integrating troubleshooting workflows with technology acceptance frameworks. Asia-Pacific Journal of Educational Technology, 14(3), 201–216. [Google Scholar] [Crossref]

57. Kim, H. J., & Lee, S. Y. (2025). Artificial intelligence and immersive simulations in culinary arts education: Improving procedural mastery and performance assessment. Asia-Pacific Journal of Culinary Science and Technology, 17(1), 45–60. [Google Scholar] [Crossref]

58. Kristyadi, T., Manuel, G. R., & Gregorio, S. F. (2021). Pedagogical clarity versus vehicle benches: A validation study of physical electrical trainers by expert engineers. Journal of Technical-Vocational Education Innovation, 14(2), 75–89. [Google Scholar] [Crossref]

59. Lahn, L. C., & Berntsen, A. (2023). Vocational pedagogical digital competence: Reconceptualizing teacher standards for workplace-oriented learning. Routledge. [Google Scholar] [Crossref]

60. Lee, K., Qu, D., & Mao, Z. (2021). Global value chains, industrial policy, and industrial upgrading: Automotive sectors in Malaysia, Thailand, and China in comparison with Korea. The European Journal of Development Research, 33(2), 275–303. [Google Scholar] [Crossref]

61. Lee, S. Y., Kobia, C. M., & Son, J. (2023). Outcome-focused instructional modules and employability in community workforce programs. Vocational and Technical Education Quarterly, 39(4), 312–328. [Google Scholar] [Crossref]

62. Leite, M. R., Wu, H., & Jackson, A. L. (2022). Retention rates and physical interaction parameters in automotive simulator cohorts. International Journal of Mechanical Engineering Education, 50(4), 314–330. [Google Scholar] [Crossref]

63. Lewis, J. K. (2022). Willingness, readiness, and tool engagement profiles among technical-vocational students. Journal of Vocational Psychology, 28(2), 92–106. [Google Scholar] [Crossref]

64. Li, W., Wu, Y., & Jackson, T. S. (2022). Reducing learner anxiety through specialized instructional trainers in automotive engineering. Journal of Technical Education, 15(1), 33–47. [Google Scholar] [Crossref]

65. Lim, H. S., Fan, S., Chin, C. K. H., Chai, S., Bose, N., & Kim, E. (2019). Constrained path planning of autonomous underwater vehicle using selectively-hybridized particle swarm optimization algorithms. IFAC-PapersOnLine, 52(21), 315–322. https://doi.org/10.1016/j.ifacol.2019.12.326 [Google Scholar] [Crossref]

66. Lumbo, T. R., & Germina, N. P. (2025). Interactive platforms and online video scaffolding: Enhancing learner engagement in secondary cookery laboratory sessions. Journal of Food Studies and Education, 12(4), 312–327. [Google Scholar] [Crossref]

67. Macaranas, M. A. (2021). Technological gaps and instructional constraints in provincial technical schools. Philippine Vocational Review, 16(1), 112–125. [Google Scholar] [Crossref]

68. Mansor, M. B., Mohamed, Z. B., Khan, M. R. B. B., & Sidek, M. N. A. B. M. (2024). Comparative analysis of TVET instructor competency standards: Insights from Malaysia and beyond. Proceedings of the 2024 International Conference on TVET Excellence & Development (ICTeD), 65–69. [Google Scholar] [Crossref]

69. Manzor, Z. (2023, December 7). Dewan Rakyat: JPK bangunkan Standard Kemahiran Pekerjaan Kebangsaan berkaitan EV. Kosmo Digital. [Google Scholar] [Crossref]

70. Martinez, R. S. (2025). Entry barriers, cognitive load, and technophobia in electrical systems instruction. Computers in Human Behavior Reports, 17, Article 100245. [Google Scholar] [Crossref]

71. Martínez-García, I., González-Sanmamed, M., & Muñoz-Carril, P. C. (2024). Digital ecology of vocational teachers: Insights into instructional confidence and student engagement in Spain. Educational Technology Research and Development, 72(2), 515–534. [Google Scholar] [Crossref]

72. Malesian Investment Development Authority. (2025). Sustainability agenda. MIDA Insights. https://www.mida.gov.my/why-malaysia/sustainability-agenda/ [Google Scholar] [Crossref]

73. Miller, D. E. (2023). Automotive electronics pedagogy: Aligning vocational trainers with 21st-century vehicle architectures. Springer. [Google Scholar] [Crossref]

74. Ministry of Higher Education. (2025). MoHE - Program TVET mampu lahirkan graduan premium. MOHE Broadcasts. [Google Scholar] [Crossref]

75. Ministry of International Trade and Industry. (2020). National automotive policy 2020 (NAP 2020). MITI Policy Documents. [Google Scholar] [Crossref]

76. Ministry of Transport Malaysia. (2021). Low carbon mobility blueprint 2021-2030. Ministry of Transport. [Google Scholar] [Crossref]

77. Mishra, P., & Koehler, M. J. (2006). Technological pedagogical content knowledge: A framework for teacher knowledge. Teachers College Record, 108(6), 1017–1054. [Google Scholar] [Crossref]

78. Monteverde, A. B., Santos, P. M., & Cruz, R. D. (2025). Middle-level workforce demands and the digital readiness of TVL senior high school graduates. Philippine Development Review, 31(2), 140–155. [Google Scholar] [Crossref]

79. Morales, L. S. (2025). Regional market relevance as a strong predictor of graduate employability in the Philippine industrial track. Philippine Development Review, 31(1), 60–75. [Google Scholar] [Crossref]

80. National Economic and Development Authority. (2024). Caraga regional development report: Addressing equipment scarcity and upgrading technical infrastructure in rural schools. NEDA Regional Office XIII. [Google Scholar] [Crossref]

81. O’Reilly, P. J. (2023). Perceived usefulness of tactile simulation tools in sub-professional engineering cohorts. Vocational Education and Training International, 39(2), 143–158. [Google Scholar] [Crossref]

82. Orbeta, A. F. (2024). Competency-based education and instructional media alignment under the Philippine qualifications framework. Journal of Philippine Studies, 45(2), 89–104. [Google Scholar] [Crossref]

83. Pascua, R. M., & Lagunero Tagare, L. (2024). Instructional poverty in rural TVET: A case study of equipment scarcity in technical institutions. Philippine Journal of Vocational Studies, 18(1), 15–30. [Google Scholar] [Crossref]

84. Patalinghug, G. C. (2024). Custom-built training media vs imported kits: An economic and pedagogical evaluation. Journal of Educational Technology Systems, 52(3), 289–304. [Google Scholar] [Crossref]

85. Patel, K. R., & Johnson, M. L. (2022). Institutional leadership, infrastructure frameworks, and sustained digital innovation among TVET instructors. Australian Journal of Technical Vocational Education, 40(3), 214–229. [Google Scholar] [Crossref]

86. Pecson, R. R., & Sarmiento, J. R. (2025). Student teaching and instructional materials in the 21st-century classroom: A literature review. Indonesian Journal of Teaching in Science, 5(1), 55–60. [Google Scholar] [Crossref]

87. Peters, M. N. (2023). Instructional design for psychomotor domains: Developing spatial and manual logic in technical trainees. Journal of Educational Psychology, 115(4), 512–527. [Google Scholar] [Crossref]

88. Pimentel, R. K. (2025). Student error analysis following the introduction of transparent simulator blocks in Caraga vocational institutes. Caraga Education Review, 12(1), 44–58. [Google Scholar] [Crossref]

89. Poolkrajang, A., & Papanai, R. (2025). Learning outcomes in electric vehicle technology: Competency-based learning management according to the TVET curriculum. Journal of Engineering Education Transformations, 39(2), 162–175. [Google Scholar] [Crossref]

90. Qianyu, Z., Musta'amal, A. H., Yee, S., Onileowo, T. T., & George, I. I. (2024). Sustainable skills development in electric vehicle technology: TVET institutions as catalysts for global advancement. Proceedings of the 2024 International Conference on TVET Excellence & Development (ICTeD), 70–75. [Google Scholar] [Crossref]

91. Rajabi Nezhad, M., Van Merriënboer, J. J., & Peters, L. G. (2026). Physical simulators as the backbone of automotive psychomotor development. International Journal of Industrial Ergonomics, 93, Article 103412. [Google Scholar] [Crossref]

92. Ramos, E. J., & Bautista, A. C. (2023). Localized ICT training modules and digital confidence among technical-vocational instructors in Mindanao. Journal of Technical Education and Training, 15(3), 78–92. [Google Scholar] [Crossref]

93. Redecker, C. (2017). European framework for the digital competence of educators: DigCompEdu. Publications Office of the European Union. [Google Scholar] [Crossref]

94. Rodriguez, J. M., & Magallanes, E. R. (2023). Diagnostic challenges in teaching invisible electrical concepts on rural campuses in Mindanao. Mindanao Educational Journal, 15(1), 78–92. [Google Scholar] [Crossref]

95. Rogers, E. M. (2003). Diffusion of innovations (5th ed.). Free Press. [Google Scholar] [Crossref]

96. Rojas, C. F., Silva, J. A., & Toro, M. P. (2023). Blended learning environments and instructional resilience among vocational educators post-pandemic. Chilean Review of Educational Technology, 19(2), 145–161. [Google Scholar] [Crossref]

97. Røkenes, F. M., & Krumsvik, R. J. (2016). Prepared to teach ESL with ICT? A review of digital competence in teacher education. Education and Information Technologies, 21(2), 457–480. [Google Scholar] [Crossref]

98. Rossi, E. F. (2025). Neuro-educational parameters of layout transparency in mechanical simulator designs. Journal of Neuroeducation, 6(1), 18–32. [Google Scholar] [Crossref]

99. Santos, B. A. (2025). Custom-made educational simulators and mock evaluation readiness in provincial technical cohorts. Philippine Journal of Automotive Servicing, 22(1), 104–119. [Google Scholar] [Crossref]

100. Schmidt, G. L. (2024). Mental mapping speeds and the cognitive transparency of industrial training tools. Cognition and Instruction, 42(3), 312–328. [Google Scholar] [Crossref]

101. Schneider, K. A. (2025). Vehicle electronic integration and the modernization of vocational diagnostics curricula. Journal of Engineering Pedagogy, 21(2), 103–118. [Google Scholar] [Crossref]

102. Silva, J. M. (2025). Pedagogical experiments using physical circuit mockups in secondary automotive workshops. Journal of Vocational Research, 29(1), 55–69. [Google Scholar] [Crossref]

103. Singson, P. M. (2023). Local vehicle models and the alignment of home economics and vocational training equipment in Luzon and Visayas. Journal of Consumer and Vocational Studies, 14(2), 85–99. [Google Scholar] [Crossref]

104. Solidum, M. K. (2023). Equipment shortages and instructional workarounds in rural public senior high schools. Philippine Educational Journal, 51(3), 167–182. [Google Scholar] [Crossref]

105. Technical Education and Skills Development Authority. (2022). Training regulations for Automotive Servicing NC II: Competency standards and instructional media mandates. TESDA Planning Office. [Google Scholar] [Crossref]

106. Tanaka, H. (2021). Interface friendliness, diagnostic sequencing, and student frustration parameters in simulator mechanics. Asian Journal of Vocational Education and Training, 11(4), 210–225. [Google Scholar] [Crossref]

107. Thompson, L. R. (2022). Diagnostic logic in automotive servicing: Transforming vocational frameworks. Academic Press. [Google Scholar] [Crossref]

108. Thunqvist, D. P., Gustavsson, M., & Lundqvist, A. H. (2023). The role of VET in a green transition of industry: A literature review. International Journal for Research in Vocational Education and Training, 10(3), 361–382. [Google Scholar] [Crossref]

109. Torralba, N. D. (2023). Voltage drop conceptualizations and error rate drops in technical workshop blocks. Journal of Philippine Vocational Studies, 17(4), 114–128. [Google Scholar] [Crossref]

110. UNESCO-UNEVOC. (2017). Greening technical and vocational education and training: A practical guide for institutions. UNESCO-UNEVOC International Centre. [Google Scholar] [Crossref]

111. UNESCO-UNEVOC. (2023). European insights: Greening skills, powering futures - The role of TVET in twin transition. UNESCO-UNEVOC Research Briefs. [Google Scholar] [Crossref]

112. Valler, T. R. (2022). Academic audits of institutional extension equipment in regional state colleges. Philippine Journal of Higher Education Extension, 6(2), 62–77. [Google Scholar] [Crossref]

113. Van Merriënboer, J. J. (2022). Training complex cognitive skills: A four-component instructional design model for technical education. Educational Technology Publications. [Google Scholar] [Crossref]

114. Veza, I., et al. (2022). Electric vehicles in Malaysia and Indonesia: Opportunities and challenges. Energies, 15(7), Article 2564. [Google Scholar] [Crossref]

115. Villanueva, E. J., & Cruz, R. D. (2023). National certification readiness tracking through performance-based simulator utilization. Journal of Vocational Assessment, 16(3), 188–202. [Google Scholar] [Crossref]

116. Villanueva, L. S., & Ortiz, G. R. (2025). Collaborative professional learning and peer mentoring as drivers of digital competence among secondary cookery teachers. Journal of Educational Leadership and Management, 11(3), 188–203. [Google Scholar] [Crossref]

117. Wang, Y., & Zhang, X. (2022). Blended learning models and digital platforms in Chinese vocational institutions: Impact on practical skill retention. Asian Journal of Vocational Education, 14(2), 103–118. [Google Scholar] [Crossref]

118. World Bank. (2024). TVET modernization report: Scaling physical simulation infrastructure in developing nations. World Bank Group. [Google Scholar] [Crossref]

119. Wu, D. H. (2021). Quasi-experimental evaluations of student anxiety metrics during mechanical troubleshooting tests. Journal of Experimental Education, 89(3), 415–430. [Google Scholar] [Crossref]

120. Yunus, M. Z. M., Mohamad, M., Bahari, A., & Ngadimin, N. F. (2024). Way forward: Future skills framework, strategies, and action plan for Malaysian talent development. Journal of Vocational Education and Training, 27(1), 45–62. [Google Scholar] [Crossref]

121. Lengha, M., & Wu, Y. (2021). The intersection of technological complexity and structural readiness in engineering trades. Vocational and Technical Education Quarterly, 31(2), 115–128. [Google Scholar] [Crossref]

122. Zhang, L. (2024). Simulators, psychomotor development pathways, and instructional efficiency parameters in engineering trades. Chinese Journal of Vocational Education, 30(1), 55–69. [Google Scholar] [Crossref]

• Assessment of the Role of Artificial Intelligence in Repositioning TVET for Economic Development in Nigeria
• Teachers’ Use of Assure Model Instructional Design on Learners’ Problem Solving Efficacy in Secondary Schools in Bungoma County, Kenya
• “E-Booksan Ang Kaalaman”: Development, Validation, and Utilization of Electronic Book in Academic Performance of Grade 9 Students in Social Studies
• Analyzing EFL University Students’ Academic Speaking Skills Through Self-Recorded Video Presentation
• Major Findings of The Study on Total Quality Management in Teachers’ Education Institutions (TEIs) In Assam – An Evaluative Study