Developing an Industry-Aligned TVET Curriculum Framework and Authentic Assessment Blueprint for Automotive Checking Fixture Fabrication
Authors
Faculty of Mechanical Technology and Engineering University Teknikal Malaysia Melaka (UTeM) (Malaysia)
Faculty of Mechanical Technology and Engineering University Teknikal Malaysia Melaka (UTeM) (Malaysia)
Article Information
DOI: 10.47772/IJRISS.2026.100900764
Subject Category: Education
Volume/Issue: 10/9 | Page No: 11034-11048
Publication Timeline
Submitted: 2026-10-04
Accepted: 2026-10-09
Published: 2026-10-23
Abstract
Modern automotive manufacturing depends on precise quality control, yet traditional Technical and Vocational Education and Training (TVET) curricula fall short. Conventional programs rely heavily on passive lectures and isolated 3D CAD exercises, an approach that leaves graduates ill-prepared for real-world Geometric Dimensioning and Tolerancing (GD&T), workholding mechanics, and shop-floor metrology. To address this gap, we developed and validated a 14-week project-based TVET framework and assessment blueprint centered on automotive checking fixture fabrication. Guided by Design-Based Research (DBR) and the Conceive-Design-Implement-Operate (CDIO) lifecycle, our approach integrates parametric CAD modeling, CNC machining, FDM 3D printing, and Coordinate Measuring Machine (CMM) verification with Measurement System Analysis (MSA). An expert panel of twenty industrial quality managers and TVET educators evaluated the framework, establishing strong content and construct validity with Item-Objective Congruence (IOC) scores above 0.80. The resulting 90-contact-hour curriculum features an authentic assessment rubric that ties 70% of the total grade directly to physical fabrication accuracy and metrological compliance (GRR < 30%). This model provides TVET institutions with an expert-validated, practical roadmap to align academic instruction with modern industrial quality standards
Keywords
TVET, Checking Fixture, CDIO Model, Geometric Dimensioning and Tolerancing (GD&T)
Downloads
References
1. Automotive Industry Action Group. (2010). Measurement systems analysis (MSA) reference manual (4th ed.). Automotive Industry Action Group [Google Scholar] [Crossref]
2. Agordah, F. E. (2026). TVET-industry misalignment and the limits of competency-based training reform in garment sector workforce development. Futurity Education, 6(2), 106–120. https://doi.org/10.57125/FED.2026.06.07 [Google Scholar] [Crossref]
3. Agordah, F. E., & Akrofi, M. (2026). Skills mismatch and workforce readiness for export-oriented textiles and garment manufacturing in Ghana. Journal of Human Resource & Leadership, 10(2), 29–43. https://doi.org/10.53819/81018102t5455 [Google Scholar] [Crossref]
4. American Society for Engineering Education. (2019). Integrating CNC technology and quality control concentration in engineering technology curricula. In Proceedings of the 2019 ASEE North Central Section Conference (pp. 1–12). ASEE. [Google Scholar] [Crossref]
5. Bondin, A., & Zammit, J. P. (2025). Education 4.0 for Industry 4.0: A mixed reality framework for workforce readiness in manufacturing. Multimodal Technologies and Interaction, 9(5), Article 43. https://doi.org/10.3390/mti9050043 [Google Scholar] [Crossref]
6. Culler, D. E. (2025). A pedagogical framework and course module for building awareness and know-how related to the digital thread and smart manufacturing using STEP AP242. In Proceedings of the 2025 ASEE Annual Conference & Exposition (Paper ID #48189). ASEE. [Google Scholar] [Crossref]
7. Niknam, Ekong, I., S. A., Mortazavi, M., & Li, D. (2022). A framework for Industry 4.0 workforce training through project-based and experiential learning approaches. Journal of Manufacturing Systems, 58, 865–873. [Google Scholar] [Crossref]
8. Emmanuel, A. A. (2026). Inculcating emerging skills into TVET curriculum in metalwork/automobile technology to enhance the competence of TVET students in tertiary institutions in Kogi State. Industrial Technology Education Research Journal, 9(1), 17–42. [Google Scholar] [Crossref]
9. Gani, Z., Bele, E., Galindo-Nava, E., Guo, L., & Michalska, M. (2024). Project based learning for computer integrated manufacturing and nanoscale manufacturing courses. In ASPE Annual Proceedings 2024 (pp. 1035–1040). American Society for Precision Engineering. [Google Scholar] [Crossref]
10. Goetz, S., Roth, M., Schaechtl, P., Kramer, V., Bode, C., Horber, D., Franz, M., Freitag, S., Miehling, J., & Wartzack, S. (2025). Tolerancing in product design: A holistic description scheme. Design Science, 11, Article e11. https://doi.org/10.1017/dsj.2025.6 [Google Scholar] [Crossref]
11. Hazrat, M. A., Hassan, N. M. S., Chowdhury, A. A., Rasul, M. G., & Taylor, B. A. (2023). Developing a skilled workforce for future industry demand: The potential of digital twin-based teaching and learning practices in engineering education. Sustainability, 15(23), Article 16433. https://doi.org/10.3390/su152316433 [Google Scholar] [Crossref]
12. Liu, L.-H., Cheng, J.-H., Yeh, H.-Y., Huang, Y.-F., & Wang, S.-C. (2026). A YOLOv8-integrated educational platform for design-oriented experiential learning in injection molding. Innovation on Design and Culture, 5(1), 11–18. [Google Scholar] [Crossref]
13. https://doi.org/10.35745/idc2026v05.01.0002 [Google Scholar] [Crossref]
14. McPherson, P., & Reiter, M. (2019). Providing students with practical experience in quality control through industry partnerships. In Proceedings of the 2019 ASEE Annual Conference & Exposition. ASEE. [Google Scholar] [Crossref]
15. Metavia, M., Ahmad, D., Tejawiani, I., & Aslan, A. (2026). The relevance of vocational and higher education: Aligning graduate competencies with industry needs through link-and-match strategies. Journal of Vocational Education and Educational Technology Innovations, 6(2), 95–110. [Google Scholar] [Crossref]
16. Muoghalu, N. C., & Ahmad, A. B. (2025). Exploring technological gaps in the implementation of auto-electricity or electronics: Aligning motor vehicle mechanic programs in Nigeria with modern automobile industry needs. Journal of Technical Education and Training, 17(2), 106–118. https://doi.org/10.30880/jtet.2025.17.02.007 [Google Scholar] [Crossref]
17. Ngatiman, S., Sulaiman, T., & Wong, K. Y. (2023). The challenges of implementing Industrial Revolution 4.0 elements in TVET. Journal of Technical Education and Training, 15(3), 169–181. https://doi.org/10.30880/jtet.2023.15.03.015 [Google Scholar] [Crossref]
18. Nwoye, E. G., Bassey, N. N., Omale, B. A., & Nengak, I. S. (2023). Strategies for enhancing TVET-industrial linkage for skill training and sustainable national development. Journal of Association of Vocational and Technical Educators of Nigeria, 28(1), 52–62. [Google Scholar] [Crossref]
19. Nurtanto, M., Arifin, Z., Sofyan, H., & Warju, W. (2020). Development of model for Professional Competency Assessment (PCA) in vocational education: Study of the engine tune-up injection system assessment scheme. Journal of Technical Education and Training, 12(2), 34–45. [Google Scholar] [Crossref]
20. Otu, W. (2026). Technical institute graduates in Ghana’s auto sector: An assessment of career and technology education employment impact at Abossey Okai Market. International Journal of Educational Practices and Engineering, 3(1), 1–11. [Google Scholar] [Crossref]
21. https://doi.org/10.70504/ijepe.v3i1.15566 [Google Scholar] [Crossref]
22. Peasura, P., Moolsradoo, N., Sopha, S., Lerthiranphanya, P., & Kasuriya, P. (2025). An outcome-based education module incorporated into a blended learning approach to enhance students' skill in modern automobile parts manufacturing industry in work-integrated learning. Educational Process: International Journal, 18, Article e2025425. [Google Scholar] [Crossref]
23. https://doi.org/10.22521/edupij.2025.18.425 [Google Scholar] [Crossref]
24. Peng, Q. Y., Li, W. L., Jiang, C., Cheng, Y., Wang, D., & Xu, W. (2026). Intelligent robotic machining, measurement, and feedback control in smart manufacturing. Frontiers of Mechanical Engineering, 21(2), Article 100883. [Google Scholar] [Crossref]
25. https://doi.org/10.10007/s11465-026-0883-5 [Google Scholar] [Crossref]
26. Ramírez-Cedillo, E., Armendáriz-Rodríguez, M., García-Ávila, J., Quintero-Sánchez, D., Ortiz-Espinoza, A. A., & Vargas-Martínez, A. (2025). Student 5.0: Immersive learning in next-gen Automation of Manufacturing Systems courses for the Industry 5.0 era. Frontiers in Education, 10, Article 1416761. https://doi.org/10.3389/feduc.2025.1416761 [Google Scholar] [Crossref]
27. Sarıkaya, M., Karabulut, Ş., Bodur, O., Okyayuz, A. Ş., Öztürk, N. B., & Dağlı, S. (2026). Engineering graphics literacy and manufacturing performance: A cross-national mixed-methods study of CAD competency gaps, standards compliance deficiencies, and their industrial consequences. Applied Sciences, 16(9), Article 4771. [Google Scholar] [Crossref]
28. https://doi.org/10.3390/app16094771 [Google Scholar] [Crossref]
29. Sawant, S., & Kadam, S. (2024). Active learning methodology for teaching jigs and fixtures design in mechanical engineering. Journal of Engineering Education Transformations, 37(Special Issue), 30–35. [Google Scholar] [Crossref]
30. Sumasto, F., Samudra, B., Hakim, A. R., Imansuri, F., & Pratama, I. R. (2025). Evaluation of measurement system analysis techniques for screw shaft manufacturing in teaching factory. Jurnal Industrial Servicess / Inotera, 9(1), 119–126. [Google Scholar] [Crossref]
31. https://doi.org/10.31572/inotera.vol9.iss1.2024.id311 [Google Scholar] [Crossref]
32. Sūtoová, A., Vykydal, D., Vargová, S., Palacka, R., & Kočiško, R. (2026). Competence gap analysis of early-career quality engineers in the field of quality 4.0. The TQM Journal, 38(4), 771–791. https://doi.org/10.1108/TQM-12-2024-0522 [Google Scholar] [Crossref]
33. Vázquez-Villegas, P., & Borrego, M. (2026). The global gap between the skills of technical-vocational school graduates and the manufacturing industry's needs: A 2020-2025 scoping literature systematic review. International Journal for Research in Vocational Education and Training, Early Access, 24–71. https://doi.org/10.13152/IJRVET.14.1.2 [Google Scholar] [Crossref]
34. Wahab, B. H., Aliyu, A., & Kehinde, A. (2024). Strategic adaptation of sustainable TVET practices in automobile technology to mitigate global economic challenges. Industrial Technology Education Research Journal, 7(2), 47–52. [Google Scholar] [Crossref]
35. Yoto, Y., Suyetno, A., Wibawa, A. P., Paryono, & Romadin, A. (2024). Unveiling the distinctive impact of vocational schools: Readiness of graduates in meeting industry needs under Indonesia's Link and Match program. Open Education Studies, 6(1), Article 20240045. [Google Scholar] [Crossref]
36. https://doi.org/10.1515/edu-2024-0045 [Google Scholar] [Crossref]
37. Zhai, Q., Musta’amal, A. H., Yee, S., Onileowo, T. T., & George, I. I. (2024). Sustainable skills development in electric vehicle technology: TVET institutions as catalysts for global advancement. In Proceedings of the IEEE International Conference on Technical and Vocational Education (pp. 163–175). IEEE. [Google Scholar] [Crossref]
38. Zhang, K., Chen, Z., Hu, Y., & Zheng, P. (2026). Innovative thinking and application skills-oriented pedagogy in mechanics education. Cogent Education, 13(1), Article 2657630. https://doi.org/10.1080/2331186X.2026.2657630 [Google Scholar] [Crossref]
39. Zhang, Z., Li, W., Shirvani, K., Chang, Y., Hung, Y. Y., & Esche, S. K. (2025). Flipped classroom and collaborative learning in tool design education for mechanical engineering technology. In Proceedings of the 2025 ASEE Annual Conference & Exposition (Paper ID #45733). ASEE. [Google Scholar] [Crossref]
40. Zheng, Y., Luo, Y., Zhang, X., & Xu, J. (2025). Conceive-Design-Implement-Operate (CDIO) based project learning in chemical engineering education. Education for Chemical Engineers, 52, 111–118. https://doi.org/10.1016/j.ece.2025.05.007 [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Assessment of the Role of Artificial Intelligence in Repositioning TVET for Economic Development in Nigeria
- Teachers’ Use of Assure Model Instructional Design on Learners’ Problem Solving Efficacy in Secondary Schools in Bungoma County, Kenya
- “E-Booksan Ang Kaalaman”: Development, Validation, and Utilization of Electronic Book in Academic Performance of Grade 9 Students in Social Studies
- Analyzing EFL University Students’ Academic Speaking Skills Through Self-Recorded Video Presentation
- Major Findings of The Study on Total Quality Management in Teachers’ Education Institutions (TEIs) In Assam – An Evaluative Study