Holistic Design of a Logistics Train Under Lean Principles for Minimizing Forklift Dependence in Material Supply to Production Lines
Authors
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Enrique de Jesús Mohedano Torres
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Sheila Monserrat Delgadillo Morales
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Secretaría de Planeación, Fianzas y Administración (Mexico)
Instituto Tecnológico de Pachuca, Hidalgo (Mexico)
Article Information
DOI: 10.47772/IJRISS.2026.102500002
Subject Category: Education
Volume/Issue: 10/25 | Page No: 14-26
Publication Timeline
Submitted: 2026-10-14
Accepted: 2026-10-19
Published: 2026-11-14
Abstract
In high value-added discrete manufacturing, the internal flow of materials represents a substantial share of operating costs and cycle time. Intensive reliance on forklifts for kitting and line feeding generates transport, waiting, and motion wastes that limit agility and elevate total cost of ownership. This applied study designs and validates a logistics train system (milk-run / tugger train) under Lean principles to minimize forklift dependence in a plant specialized in the manufacture of passenger rail vehicles.
A PRISMA-guided systematic review of 22 studies (2016–2026) informed the intervention. The methodology follows a four-phase design-science approach: (1) diagnosis and stratification through time-and-motion studies, Spaghetti diagrams, and ABC classification; (2) conceptual and detailed design involving redesign of dollies and mother carts with double Ackermann steering, integration with a Motrec MT 290 tugger tractor, and definition of visual aids and footprints; (3) discrete-event simulation in FlexSim comparing the proposed train with the existing forklift system; and (4) standardization and economic evaluation through procedure manuals, checklists, and cost-benefit analysis.
Baseline diagnosis confirmed average line-feeding cycle times of 11 minutes driven by forklift availability and excessive travel. The redesigned logistics train demonstrated, in simulation, significant reductions in cycle time, lower congestion, optimized space utilization, and markedly decreased forklift dependence. Cost-benefit analysis indicated lower operating costs (fuel, maintenance, and labor) and a favorable return on investment. The sequential methodology provides both technical rigor and practical feasibility, addressing literature gaps concerning real-plant validation, non-automotive applications, and joint integration of physical redesign, Kanban, and kitting.
The findings support the adoption of standardized logistics trains as an effective alternative to intensive forklift use for internal material supply in complex assembly environments
Keywords
logistics train; milk-run; Lean Manufacturing; forklift reduction; line feeding; FlexSim simulation; Kanban; cost-benefit analysis
Downloads
References
1. Akkad, M. Z., & Bányai, T. (2023). Energy consumption optimization of milk-run based in-plant supply. Logistics, 7(1), Article 12. https://doi.org/10.3390/logistics7010012 [Google Scholar] [Crossref]
2. Bányai, T. (2024). Optimization of hub-based milkrun supply. Sustainability, 16(4), Article 1542. https://doi.org/10.3390/su16041542 [Google Scholar] [Crossref]
3. Bányai, T., & Francuz, B. (2022). A new design approach for milkrun-based in-plant supply. Logistics, 6(4), Article 74. [Google Scholar] [Crossref]
4. Bae, K., et al. (2016). Lean design and analysis of a milk-run delivery system. International Journal of Production Research, 54(19), 5791–5806. [Google Scholar] [Crossref]
5. Caputo, A. C., et al. (as referenced in 2016–2023 studies). Decision models for parts feeding policies in assembly systems. [Google Scholar] [Crossref]
6. Creswell, J. W., & Creswell, J. D. (2018). Research design: Qualitative, quantitative, and mixed methods approaches (5th ed.). SAGE. [Google Scholar] [Crossref]
7. Facchini, F., et al. (2024). IoT-based milk-run routing for in-plant logistics. Computers & Industrial Engineering, 188, Article 109876. [Google Scholar] [Crossref]
8. Fedtke, S., et al. (2023). In-line kitting for part feeding in automotive assembly. International Journal of Production Economics, 255, Article 108689. [Google Scholar] [Crossref]
9. Gil-Vilda, F., et al. (2020). An in-plant milk-run design method to improve surface occupancy and mizusumashi time. International Journal of Production Research, 58(20), 6227–6243. [Google Scholar] [Crossref]
10. Hernández-Sampieri, R., Fernández-Collado, C., & Baptista-Lucio, P. (2018). Metodología de la investigación (6th ed.). McGraw-Hill. [Google Scholar] [Crossref]
11. Kluska, K., & Pawlewski, P. (2018). The use of simulation in the design of milk-run intralogistics systems. IFAC-PapersOnLine, 51(11), 1428–1433. [Google Scholar] [Crossref]
12. Miqueo, A., et al. (2023). Multi-model in-plant logistics using milkruns. Machines, 11(1), Article 66. https://doi.org/10.3390/machines11010066 [Google Scholar] [Crossref]
13. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., … Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 [Google Scholar] [Crossref]
14. Sali, M., & Sahin, E. (2016). Line feeding optimization for just in time assembly lines. International Journal of Production Economics, 179, 1–15. [Google Scholar] [Crossref]
15. Sevim, B., & Görkemli Aykut, L. (2026). Dynamic in-plant milk-run via agent-based modelling. Journal of Manufacturing Systems (in press). [Google Scholar] [Crossref]
16. Simić, D., et al. (2021). Modelling material flow using milk run and Kanban. International Journal of Simulation Modelling, 20(2), 345–356. [Google Scholar] [Crossref]
17. Sipahioğlu, A., & Altin, A. (2019). Mathematical model for in-plant milk-run routing. Journal of Intelligent Manufacturing, 30(5), 2107–2120. [Google Scholar] [Crossref]
18. Urru, A., et al. (2018). Planning and dimensioning of milk-run systems. Procedia CIRP, 72, 273–278. [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Assessment of the Role of Artificial Intelligence in Repositioning TVET for Economic Development in Nigeria
- Teachers’ Use of Assure Model Instructional Design on Learners’ Problem Solving Efficacy in Secondary Schools in Bungoma County, Kenya
- “E-Booksan Ang Kaalaman”: Development, Validation, and Utilization of Electronic Book in Academic Performance of Grade 9 Students in Social Studies
- Analyzing EFL University Students’ Academic Speaking Skills Through Self-Recorded Video Presentation
- Major Findings of The Study on Total Quality Management in Teachers’ Education Institutions (TEIs) In Assam – An Evaluative Study