Advancing Sustainable Manufacturing through Circular Economy Integration Aligned With SDGs 7, 9, and 12: An Industry 4.0 and Education Perspective at Open University Malaysia

Authors

Tajuzzaman Hassanor

Open University Malaysia, Selangor (Malaysia)

Thirumeni T Subramaniam

Open University Malaysia, Selangor (Malaysia)

Azmi Che Leh

Open University Malaysia, Selangor (Malaysia)

Sharifah Rosfashida Syed Abd Latif

Open University Malaysia, Selangor (Malaysia)

Azmi Mohamed

Open University Malaysia, Selangor (Malaysia)

Article Information

DOI: 10.51244/IJRSI.2025.120800190

Subject Category: Education

Volume/Issue: 12/8 | Page No: 2114-2124

Publication Timeline

Submitted: 2025-08-12

Accepted: 2025-08-19

Published: 2025-09-19

Abstract

This research focuses on linking Circular Economy practices with Sustainable Development Goals (SDGs) 7, 9, and 12 to promote sustainability, innovation, and resilience in the manufacturing sector. Conducted by the Open University of Malaysia (OUM), the study evaluates the level of understanding of Industry 4.0, Circular Economy, and SDGs among Open Distance Learning (ODL) students, identifying educational shortcomings and suggesting improvement measures. The conventional linear economic model contributes to resource exhaustion and environmental harm, posing challenges to sustainable growth. Circular Economy principles, which prioritise efficient resource use and waste minimisation, present a practical alternative but have yet to see widespread adoption. Using a quantitative approach supported by structured questionnaires, the research assesses student knowledge of Circular Economy concepts and their alignment with SDGs 7, 9, and 12. Findings show varied levels of awareness, indicating the need for stronger educational engagement. Suggested measures include recycling initiatives, product longevity in design, shared resource utilisation, remanufacturing processes, and waste reduction. The proposed framework promotes innovation, sustainable product development, effective resource and waste management, targeted education, and continuous evaluation to support a regenerative manufacturing industry in line with global sustainability targets.

Keywords

Circular Economy, Sustainable Development Goals, Industry 4.0, Resource Efficiency

Downloads

References

1. D. Aygün, I. G. Yılmaz, and Z. E. Sati, "Industry 4 Awareness: A Research on Postgraduate Students," in 6th International Management Information Systems Conference, Istanbul: Kadir Has University, 2019, pp. 239–247. [Google Scholar] [Crossref]

2. G. Brennan, M. Tennant, and F. Blomsma, "Business and production solutions: closing the loop," in Sustainability: Key Issues, H. Kopnina and E. Shoreman-Ouimet, Eds. London: EarthScan, Routledge, 2015, pp. 219–239. [Google Scholar] [Crossref]

3. European Commission, "Closing the Loop - an EU Action Plan for the Circular Economy," COM (2015) 614, Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee, and the Committee of the Regions, European Commission, Brussels, 2015. [Google Scholar] [Crossref]

4. Department of Statistics Malaysia, "Official Portal of Department of Statistics Malaysia," 2022. [Online]. Available: https://www.dosm.gov.my/. [Accessed: 11-May-2024]. [Google Scholar] [Crossref]

5. D. Jati, Y. Hermawan, and M. A. Rahman, "Awareness and Knowledge Assessment of Sustainable Development Goals Among University Students," Jurnal Ekonomi & Studi Pembangunan, Oct. 2019. [Google Scholar] [Crossref]

6. P. Jones, M. Wynn, D. Hillier, and D. Comfort, "The Sustainable Development Goals and Information and Communication Technologies," Indonesian Journal of Sustainability Accounting and Management, vol. 1, no. 1, pp. 1–15, 2017. ISSN 2597-6214, e-ISSN 2597-6222. [Google Scholar] [Crossref]

7. J. Korhonen, A. Honkasalo, and J. Seppälä, "Circular economy: Critical examination and challenges for global sustainability," 2018. [Google Scholar] [Crossref]

8. S. Morton, D. Pencheon, and N. Squires, "Sustainable Development Goals (SDGs), and their implementation: A national global framework for health, development and equity needs a systems approach at every level," British Medical Bulletin, vol. 124, pp. 81–90, Oct. 2017. [Google Scholar] [Crossref]

9. A. Murray, K. R. Skene, and K. Haynes, "The interdisciplinary origins and application of the circular economy: Addressing its tensions and proposing a revised definition," 2017. [Google Scholar] [Crossref]

10. V. M. Piza, J. Aparicio, C. Rodríguez, R. Marín, J. Beltrán, and R. Bedolla, "Sustainability in Higher Education: A Didactic Strategy for Environmental Mainstreaming," Sustainability, vol. 10, p. 4556, 2018. [Google Scholar] [Crossref]

11. J. Sachs, The Age of Sustainable Development. New York: Columbia University Press, 2015. [Google Scholar] [Crossref]

12. S. Sikdar, "The novelty of the circular economy concept: Potential applications and limitations," 2019. [Google Scholar] [Crossref]

13. World Commission on Environment and Development, "Our common future," United Nations, 1987. [Online]. Available: https://sustainabledevelopment.un.org/content/documents/5987our-common-future.pdf. [Google Scholar] [Crossref]

14. T. Zink and R. Geyer, "Circular economy rebound: A concept where circular economy activities might increase overall production, potentially offsetting environmental benefits," 2017. [Google Scholar] [Crossref]

15. L. Xu, "A review of classical and recent literature on circular economy: Proposing future research directions and highlighting unresolved theoretical foundations," 2014. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles