A Conceptual CIPP-Based Model for Professional NDT Certification in Malaysian TVET Institutions

The implementation of professional Non-Destructive Testing (NDT) certification in public Technical and Vocational Education and Training (TVET) institutions remains insufficiently theorized, particularly regarding how international certification requirements are translated into institutional practice. While standards such as ISO 9712:2021 provide a robust basis for personnel qualification and certification, limited attention has been given to the institutional mechanisms required to operationalize these requirements systematically within Malaysian public skills training institutions (PSTI). This conceptual paper aims to develop an initial implementation model for professional NDT certification by integrating ISO 9712:2021 requirements with the Context, Input, Process, and Product (CIPP) framework. The study employed a two-stage qualitative conceptual design comprising document-based thematic analysis of three core certification references, namely ISO 9712:2021, the International Committee for Non-Destructive Testing (ICNDT) Guide, and American Society of Mechanical Engineers (ASME) ANDE-1, followed by a narrative literature review to support and contextualize the identified elements. The synthesis generated four principal implementation domains: context, input, process, and product. In addition, governance emerged as a cross-domain element supported by quality assurance, industry linkage, and continuous improvement. The proposed model suggests that the effectiveness of professional NDT certification should be understood not merely as standards compliance or candidate examination performance, but as the outcome of systemic alignment among strategic rationale, institutional readiness, implementation quality, and professional competency outcomes. This article contributes by reframing NDT certification as an institutional implementation system and by offering a conceptual foundation for subsequent expert validation and empirical testing in Malaysian TVET settings.

Non-Destructive Testing (NDT); professional certification

1. ASME. (2021). ASME NDE & QC Central Qualification Program Standard - ASME ANDE-1-2020.pdf. [Google Scholar] [Crossref]

2. Aust, J., Mitrovic, A., & Pons, D. (2021). Assessment of the effect of cleanliness on the visual inspection of aircraft engine blades: An eye tracking study. Sensors, 21(18), 1–40. https://doi.org/10.3390/s21186135 [Google Scholar] [Crossref]

3. Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77–101. https://doi.org/10.1191/1478088706qp063oa [Google Scholar] [Crossref]

4. Chai, J, Yin, C. (2017). The Scheme for Qualification and Certification of Non-Destructive Testing Personnel in Taiwan. Asia Pacific Conference for Non-Destructive Testing, 1–4. [Google Scholar] [Crossref]

5. Christensen, J. M., Stefani, T., Anilkumar Girija, A., Hoemann, E., Vogt, A., Werbilo, V., Durak, U., Köster, F., Krüger, T., & Hallerbach, S. (2025). Formulating an Engineering Framework for Future AI Certification in Aviation. Aerospace, 12(6), 1–27. https://doi.org/10.3390/aerospace12060482 [Google Scholar] [Crossref]

6. Clifford, T. (2021). Implementing a Successful NDT Education Program: Planning, Design, Resources, Curriculum, and Evaluation. Materials Evaluation, 79, 875–881. https://doi.org/10.32548/2021.me-04203 [Google Scholar] [Crossref]

7. Creswell, J. W., & Plano Clark, V. L. (2017). Designing and conducting mixed methods research (3rd ed.). SAGE Publications. [Google Scholar] [Crossref]

8. DSD. (2026). non-destructive-testing-ndt. Department of Skills Development Malaysia. https://www.dsd.gov.my/en/service/non-destructive-testing-ndt [Google Scholar] [Crossref]

9. Duarte Soliani, R., Alves de Oliveira, D., da Conceição Nascimento Pontes, J., & Diniz Reis Drumond, T. (2025). Professional training in Industry 4.0: a competency-based educational model. Gestao e Producao, 32, 1–20. https://doi.org/10.1590/1806-9649-2025v32e2225 [Google Scholar] [Crossref]

10. Gandhi, N., Rose, R., Croxford, A., & Ward, C. (2022). Understanding System Complexity in the Non-Destructive Testing of Advanced Composite Products. Journal of Manufacturing and Materials Processing. https://doi.org/10.3390/jmmp6040071 [Google Scholar] [Crossref]

11. Goldsmith, S., & Rosenfeld, M. (2017). Accreditation in the Certification and Licensing Sector of the Testing Industry. 125–144. https://doi.org/10.4324/9781315092775-7 [Google Scholar] [Crossref]

12. Hani, M. H. M., Ismail, A., Samad, S. F. A., Yusof, M. A. M., & Hafidzi, A. (2025). Enhancing High Aptitude TVET Technological Assistance (HATTA) Framework of a Digital Competence Model for TVET Educator’s Satisfaction by Using Linear Regression Approaches. Journal of Technical Education and Training, 17(1 Special Issue), 45–61. https://doi.org/10.30880/jtet.2025.17.01.004 [Google Scholar] [Crossref]

13. ICNDT. (2024). ICNDT Guide and Recommendations for Qualification and Certification of NDT Personnel. July. http://www.icndt.org/Documents/ICNDT-Guide [Google Scholar] [Crossref]

14. Irene, E. A. (2023). Evaluation of Teacher Education Curricula and its relevance to licensure examination using Context, Input, Process and Product (CIPP) model. Social Sciences and Humanities Open, 8(1), 100607. https://doi.org/10.1016/j.ssaho.2023.100607 [Google Scholar] [Crossref]

15. ISO. (2021). ISO 9712 : Non-destructive testing — Qualification and certification of NDT personnel. [Google Scholar] [Crossref]

16. Joshi, D. D., & Mungel, S. A. (2017). Developing Training Activity to Meet ISO 9712 Standard Requirements. 14–16. [Google Scholar] [Crossref]

17. Juntunen, M., & Lehenkari, M. (2019). A narrative literature review process for an academic business research thesis. Studies in Higher Education, 46, 330–342. https://doi.org/10.1080/03075079.2019.1630813 [Google Scholar] [Crossref]

18. Loutsetis, C. (2025). Toward a Modular, Global Certification Framework for Concrete NDT Practitioners. E-Journal of Nondestructive Testing. https://doi.org/10.58286/31702 [Google Scholar] [Crossref]

19. Mesbah, K., Mimount, S., & Darouich, M. (2025). Advancements in Certification Standards and Training for Non-Destructive Testing (NDT) in Civil Engineering. E-Journal of Nondestructive Testing. https://doi.org/10.58286/32266 [Google Scholar] [Crossref]

20. Meyendorf, N., Ida, N., Singh, R., & Vrana, J. (2023). NDE 4.0: Progress, promise, and its role to industry 4.0. NDT and E International, 140(September), 102957. https://doi.org/10.1016/j.ndteint.2023.102957 [Google Scholar] [Crossref]

21. Mustapha, R., Sadrina, Mat Nashir, I., bin Azman, M. N. A. ., & Hasnan, K. A. (2019). Assessing the Implementation of the Project-Based Learning (PJBL) in the Department of Mechanical Engineering at a Malaysian Polytechnic. Journal of Technical Education and Training, 12(1). [Google Scholar] [Crossref]

22. Naeem, M., Ozuem, W., Howell, K., & Ranfagni, S. (2023). A Step-by-Step Process of Thematic Analysis to Develop a Conceptual Model in Qualitative Research. International Journal of Qualitative Methods, 22. https://doi.org/10.1177/16094069231205789 [Google Scholar] [Crossref]

23. Nsengiyumva, W., Zhong, S., & Tu, S. T. (2026). NDE 4.0: The confluence of cutting-edge nondestructive inspection practices, data fusion techniques, artificial intelligence, and cyber-physical systems for effective evaluation of materials and structures. Mechanical Systems and Signal Processing, 242(May 2025), 113626. https://doi.org/10.1016/j.ymssp.2025.113626 [Google Scholar] [Crossref]

24. Prakash, N., Nieberl, D., Mayer, M., & Schuster, A. (2023). Learning defects from aircraft NDT data. NDT and E International, 138(May), 102885. https://doi.org/10.1016/j.ndteint.2023.102885 [Google Scholar] [Crossref]

25. Stufflebeam, D. L., & Coryn, C. L. S. (2014). Evaluation theory, models, and applications. John Wiley & Sons. [Google Scholar] [Crossref]

26. Sulaiman, F., & Eldy, E. F. (2023). The integration of non-destructive testing courses into University academic curriculum: Review on Malaysian context. In D. A. (Ed.), AIP Conference Proceedings (Vol. 2619). American Institute of Physics Inc. https://doi.org/10.1063/5.0122547 [Google Scholar] [Crossref]

27. Tiwari, S., Balasubramaniam, K., & Ananthanarayanan, R. (2025). NDE4.0 in Action - Driving Operational Efficiencies Through Unified Digital Platforms. E-Journal of Nondestructive Testing, 30(6). https://doi.org/10.58286/31308 [Google Scholar] [Crossref]

28. Tsougkranis, A. (2018). In-service inspection; training and certification aspects. NDT 2018 - 57th Annual Conference of the British Institute of Non-Destructive Testing, 225–237. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85060786313&partnerID=40&md5=36660c9e7cfdfd51c779965b8acb42c9 [Google Scholar] [Crossref]

29. Tunukovic, V., McKnight, S., Hifi, A., Mohseni, E., Pierce, S. G., Vithanage, R. K. W., Dobie, G., MacLeod, C. N., Cochran, S., & O’Hare, T. (2025). Human-machine collaborative automation strategies for ultrasonic phased array data analysis of carbon fibre reinforced plastics. NDT and E International, 154. https://doi.org/10.1016/j.ndteint.2025.103392 [Google Scholar] [Crossref]

30. Virkkunen, I., Koskinen, T., Jessen-Juhler, O., & Rinta-aho, J. (2021). Augmented Ultrasonic Data for Machine Learning. Journal of Nondestructive Evaluation, 40(1), 1–11. https://doi.org/10.1007/s10921-020-00739-5 [Google Scholar] [Crossref]

31. Vrana, J., & Singh, R. (2021). NDE 4.0—A Design Thinking Perspective. Journal of Nondestructive Evaluation, 40(1). https://doi.org/10.1007/s10921-020-00735-9 [Google Scholar] [Crossref]

32. Wiyono, B. B., Komariah, A., Hidayat, H., & Kusumaningrum, D. E. (2025). The structural effects of evaluation types in the implementation process of the independent learning program in higher education. Discover Sustainability, 6(1). https://doi.org/10.1007/s43621-025-01171-3 [Google Scholar] [Crossref]

33. Yoshany, N., Mahmoodabad, S. S. M., Moradi, L., & Sharma, M. (2025). Beyond traditional training: a comprehensive CIPP evaluation of medical internships: assessing program design, implementation, and clinical competency outcomes. BMC Medical Education, 25(1). https://doi.org/10.1186/s12909-025-07404-3 [Google Scholar] [Crossref]

34. Zavadil, T., & Zavadil, Z. (2018). Quality factors affecting NDT personnel qualification and certification process. NDT 2018 - 57th Annual Conference of the British Institute of Non-Destructive Testing, 217–224. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85060775055&partnerID=40&md5=ad68a35102a17a3319ff4be1285f3a86 [Google Scholar] [Crossref]

• Assessment of the Role of Artificial Intelligence in Repositioning TVET for Economic Development in Nigeria
• Teachers’ Use of Assure Model Instructional Design on Learners’ Problem Solving Efficacy in Secondary Schools in Bungoma County, Kenya
• “E-Booksan Ang Kaalaman”: Development, Validation, and Utilization of Electronic Book in Academic Performance of Grade 9 Students in Social Studies
• Analyzing EFL University Students’ Academic Speaking Skills Through Self-Recorded Video Presentation
• Major Findings of The Study on Total Quality Management in Teachers’ Education Institutions (TEIs) In Assam – An Evaluative Study