Synthesis of Epoxy from Unsaturated Fatty Acids of Castor Oil (Ricinus Communis Linn)
Authors
Department of Chemistry, State University of Medan (Indonesia)
Department of Chemistry, State University of Medan (Indonesia)
Department of Chemistry, State University of Medan (Indonesia)
Chemistry Department Students, State University of Medan (Indonesia)
Article Information
DOI: 10.51244/IJRSI.2026.1306000409
Subject Category: Chemistry
Volume/Issue: 13/6 | Page No: 5494-5502
Publication Timeline
Submitted: 2026-06-23
Accepted: 2026-06-28
Published: 2026-06-09
Abstract
Fatty acid epoxy or oxirane compounds are intermediates that are reactive to polar reagents. The purpose of reacting them with polar reagents is to obtain compounds that increase the polarity of the hydrocarbon part so that they are more effective when used as surfactants. In this study, epoxy was synthesized from unsaturated fatty acids of castor oil. The epoxy reagent used was performic acid which was synthesized in situ from formic acid and hydrogen peroxide using sulfuric acid as a catalyst at a temperature of 70 oC and a time of 90 minutes. Based on analysis with an FTIR Spectrophotometer, it was confirmed that fatty acid epoxy compounds had been formed, namely by the appearance of C-O-C epoxy absorption at 1015 cm-1 for stretching and 856 cm-1 for bending. Furthermore, based on the results of analysis with GC-MS, the epoxy results were: epoxy hexadecanoate (0.96%), epoxy hexadecanoate (1.02%) and epoxy risnoleate 0.34 %. The epoxidation reaction performed is still not optimal, but it can be used as a reference for refining subsequent epoxidation reactions.
Keywords
epoxy; castor oil; peroxyformic acid; surfactant
Downloads
References
1. J. M. Danlami, A. B. Arsad, & M. A. A. Zaini. Journal of the Taiwan Institute of Chemical Engineers, 47, 99–104 (2015). https://doi.org/10.1016/j.jtice.2014.10.012 [Google Scholar] [Crossref]
2. H. Kheyrodin. International Journal of Clinical Chemistry and Laboratory Medicine, 10(1), 8–11 (2025). https://doi.org/10.20431/2455-7153.1001002 [Google Scholar] [Crossref]
3. F. O. Nitbai, P. J. P. Tjitda, H. E. Wogo, & A. I. R. Detha. Journal of Oleo Science, 71(6), 781–783 (2022). https://doi.org/10.5650/jos.ess21226 [Google Scholar] [Crossref]
4. M. Sitorus, S. Ibrahim, H. Nurdin, & D. Darwis. Indonesian Journal of Chemistry, 9(2), 278–284 (2009). https://doi.org/10.22146/ijc.21543 [Google Scholar] [Crossref]
5. Z. Yoping, H. Yong, & F. Yuming. Green Chemistry, 111, 71–77 (2022). https://doi.org/10.1039/c6gc00942e [Google Scholar] [Crossref]
6. G. Lewandowski, M. Musik, K. Malarczyk-Martusik, L. Salacinski, & E. Milchrtt. Mini Reviews in Organic Chemistry, 16(4), 1–11 (2019). https://doi.org/10.2174/1570193X16666190430154319 [Google Scholar] [Crossref]
7. A. Brandolese, F. D. Monica, M. A. Pericas, & A. W. Kleij. Macromolecules, 55(7), 2566–2577 (2022). https://doi.org/10.1021/acs.macromol.2c00321 [Google Scholar] [Crossref]
8. C. Morissean, S. D. Kodani, S. G. Kamita, Y. Yung, K. S. Stephan Lee, B. D. Hamoch, & M. Battimo. International Journal of Molecular Sciences, 22(9), 44993–45009 (2021). https://doi.org/10.3390/ijms22094993 [Google Scholar] [Crossref]
9. T. Cogliano, V. Russo, R. Turco, E. Santacesaria, M. Di Serio, T. Salmi, & R. Tesser. Chemical Engineering Science, 251, 117488 (2022). https://doi.org/10.1016/j.ces.2022.117488 [Google Scholar] [Crossref]
10. S. Bagagnan, M. D. Jeselme, V. Alphonse, & S. Guerin-Rechdaomi. Environmental Science and Pollution Research, 31(48), 58252–58262 (2024). https://doi.org/10.1007/s11356-024-34958-4 [Google Scholar] [Crossref]
11. M. B. Mahadi, N. Z. Abbas, I. M. Rasib, & M. A. Rahman. IOP Conference Series: Materials Science and Engineering, 1251(1), 012017 (2022). https://doi.org/10.1088/1757-899X/1257/1/012017 [Google Scholar] [Crossref]
12. N. Panchal & V. M. Vaghela. Oriental Journal of Chemistry, 40(4), 997–1016 (2024). http://dx.doi.org/10.13005/ojc/400410 [Google Scholar] [Crossref]
13. K. Patel, N. Panchal, & P. Ingle. International Journal of Advanced Research in Chemical Science (IJARCS), 6(3), 6–21 (2019). http://dx.doi.org/10.20431/2349-0403.0603002 [Google Scholar] [Crossref]
14. J. Ecker, M. Scherer, G. Schmitz, & G. Liebisch. Journal of Chromatography B, 897, 98–104 (2012). https://doi.org/10.1016/j.jchromb.2012.04.015 [Google Scholar] [Crossref]
15. A. L. Mihai, N. Mioara, & M. Belc. Romanian Biotechnology Letters, 24(6), 973–985 (2019). http://dx.doi.org/10.25083/rbl/24.6/973.985 [Google Scholar] [Crossref]
16. A. Babu, N. R. Mathew, & R. Ashwini. International Journal of Research Publication and Reviews, 4(10), 1342–1345 (2023). [Google Scholar] [Crossref]
17. G. F. Faturachman, A. J. Kamanda, S. Maharani, L. A. Latif, G. A. Belo, & S. G. Ayubi. Indonesian Journal of Pharmaceutical Education, 5(1), 27–33 (2025). https://doi.org/10.37311/ijpe.v5i1.23309 [Google Scholar] [Crossref]
18. A. Dekebo, S. Youl-Kwon, C. Jung, & D. Hokim. Journal of Apicultural Research, 33(2), 117–128 (2018). http://dx.doi.org/10.17519/apiculture.2018.06.33.2.117 [Google Scholar] [Crossref]
19. A. Nugraha & A. Nandyanto. International Journal of Multidisciplinary Research (IJoMR), 1(2), 171–206 (2021). http://dx.doi.org/10.17509/ijomr.v1i2.35191 [Google Scholar] [Crossref]
20. M. R. L. Himabindu, S. A. Parameswari, & C. Gopinath. International Journal of Pharmaceutical Quality Assurance (IJPQA), 4(3), 42–51 (2013). [Google Scholar] [Crossref]
21. D. Tsikhas. Journal of Clinical Medicine, 4(3), 42–51 (2024). https://doi.org/10.3390/jcm13237276 [Google Scholar] [Crossref]
22. D. Kotnarowsko. Progress in Organic Coatings, 67(3), 324–328 (2010). https://doi.org/10.1016/j.porgcoat.2009.10.026 [Google Scholar] [Crossref]
23. D. Kotnarowsko, O. Kobus, Y. Kolomiiets, & A. Aleinikova. IOP Conference Series: Materials Science and Engineering, 708(1), 012081 (2019). http://dx.doi.org/10.1088/1757-899X/708/1/012081 [Google Scholar] [Crossref]
24. A. Horn & U. Kazmaier. European Journal of Organic Chemistry, 2018(20–21), 2531–2536 (2018). https://doi.org/10.1002/ejoc.201701645 [Google Scholar] [Crossref]
25. H. Harrasi, I. R. Green, I. Ahmed, & A. Al-Harrasi. RSC Advances, 4(31), 12882–12917 (2014). http://dx.doi.org/10.1002/chin.201431229 [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Green Synthesis of Cobalt Oxide/Gold (Coo/Au) Bimetallic Nanoparticles Using Sinapinic Acid: A Comprehensive Study
- Advances in Solar Cell Technologies: A Comprehensive Review of Material Synthesis, Structural Properties, Efficiency and Diverse Applications
- Thermal Decomposition of Co-Fe-Cr-Citrate Complex Via Structural and Spectral Study
- Surface Activity and Thermodynamic Assessment of Surfactants Derived from Oreochromis Niloticus Oil (Nile Tilapia Fish)
- Green Synthesis of Robust Metal-Organic Frameworks: A Sustainable Approach for Advanced Applications