Special Issue Instituto Tecnológico de Pachuca
IJRISS - Volume 10, Issue 25
Articles
Improving the Supply Process in SMEs in Hidalgo Through the Use of AI with N8N
Authors: Yohensis Mariam Guillen Zamora, León Escalante Santos Guadalupe, Dariana Anaya González, Claudia Reyes Bolaños, Luz Angélica Cortes Madrigal, Larissa Montserrat Pérez Avalos
Abstract: Micro, small, and medium-sized enterprises (SMEs) represent more than 99% of economic units in Mexico and generate around 70% of formal employment; however, they face productivity gaps due to limited ...
Holistic Design of a Logistics Train Under Lean Principles for Minimizing Forklift Dependence in Material Supply to Production Lines
Authors: Karla Sherlyn Soní Ramírez, Enrique de Jesús Mohedano Torres, Sheila Monserrat Delgadillo Morales, Alejandra Lugo Islas, Dariana Anaya González, Luz Angélica Cortes Madrigal
Abstract: In high value-added discrete manufacturing, the internal flow of materials represents a substantial share of operating costs and cycle time. Intensive reliance on forklifts for kitting and line feedin...
Prioritization of Machinery Replacement through Incremental Economic Analysis and FUCOM-TOPSIS in a Furniture Company in Hidalgo
Authors: Dariana Anaya González, Verónica Gómez Arriaga, Yohensis Mariam Guillen Zamora, Claudia Reyes Bolaños, Carlos Darío Acevedo Magaña, Erik Rodríguez Soto
Abstract: The renewal of machinery in companies with limited financial resources requires distinguishing between the economic convenience of replacing an asset and the relative priority of the available project...
Increasing Productivity in Hidalgo through Additive Manufacturing: A Case Study in SMEs
Authors: Keyla Espinosa Ramos, Enrique de Jesús Mohedano Torres, Guillermo Acosta Mendoza, Gabriela Calva Arcega, Adrián Sánchez Ortega, Alejandra Lugo Islas
Abstract: Micro, small, and medium-sized enterprises (SMEs) form the backbone of regional economies such as Hidalgo, Mexico, yet they frequently exhibit productivity lags relative to larger firms due to limited...
Improving Productivity and Fiscal Compliance in a Construction SME in Hidalgo Through Kaizen and the PDCA Cycle: A Case Study
Authors: Alejandra Segura Juárez, Marisel Villeda Olguín, Alejandra Lugo Islas, Sheila Monserrat Delgadillo Morales, Vannia Martínez Luna, Edgar Lozano Bautista
Abstract: Micro, small, and medium-sized enterprises (SMEs) in the construction sector of Hidalgo, Mexico, frequently face productivity constraints and fiscal compliance challenges arising from limited process ...
Standardization of the Handling of Master Samples in Machining: Application of the PDCA Cycle and Lean Tools for Improving Traceability and Reducing Rework
Authors: Luz Angélica Cortes Madrigal, Brandon Alexis Escamilla Pérez, Karla Sherlyn Soní Ramírez, Gloria Sandoval Méndez, Pedro Alberto Piñón Dominguez, Alejandra Segura Juárez
Abstract: In precision machining of high-performance materials such as polytetrafluoroethylene (PTFE), customer specifications are frequently defined by physical master samples rather than detailed technical dr...
Design and Preliminary Experimental Characterization of a LowCost ESP32-Based System for Electric Motor Condition Monitoring
Authors: Gael Rangel Castañón, Diego Ortega Pérez, Noel Montiel Elizalde, Yael Omar Acosta Rangel, Irving Yahir Barrera Nochebuena
Abstract: Small and medium-sized manufacturing enterprises without digital instrumentation detect incipient faults in electric motors by sight and sound, which leaves no record of the vibration and temperature ...
Municipal Solid Waste Management in Pachuca De Soto, Hidalgo, Through Reverse Logistics and a Greedy-Variant Heuristic Algorithm
Authors: García Pérez Mario Uriel, Iglesias Cebrero Diego Francisco, Bisueto Álvarez Angel Gabriel, Serrano Camargo Dilan Misael
Abstract: The municipality of Pachuca de Soto, Hidalgo, is the largest generator of municipal solid waste (MSW) in the state and recycles barely 10% of what it collects. One cause of this material leakage is th...
A Constructive Heuristic with Local Search and Quality Function Deployment for the User-Centred Design of Assembly Lines Employing Workers with Cognitive Disabilities
Authors: Reyes Álvarez Hugo Enrique, Amador Cortez Alfonso Gerosdam, Ayala Hernández Mauro Haran, Mohedano Torres Enrique de Jesús
Abstract: Six out of ten working-age people with disabilities remain outside the labour market in Mexico. Those who do join a production line encounter work plans computed without regard for the fact that peopl...
Development of Vehicle Routing Problem (VRP) Models in Python to Optimize Last-Mile Distribution Routes in an SME
Authors: Maya Bautista Jukari, Navarro Ordoñez Diana Mariel, Rivera Escalante Daniel, Meneses Sánchez Valeria, Acosta Martínez Nayeli Abigail
Abstract: Small and medium-sized enterprises (SMEs) that produce perishable food often plan last-mile distribution reactively, which raises fuel consumption, extends working days and forces vehicles to return t...
Integration of the RANAS and UCD Models in the Development of a Filter to Improve Water Treatment in the Valle De Mezquital
Authors: Maya Bautista Jukari, Navarro Ordoñez Diana Mariel, Rivera Escalante Daniel
Abstract: Water pollution in the Tula River basin and the proliferation of water hyacinth (Eichhornia crassipes) in the Endhó Dam, Mexico, represent two related environmental problems: the deterioration of wat...
An MDSS Architecture for Customer Experience Decision Support in E-Commerce Using Data-Driven Decision-Making
Authors: Adrián Sánchez Ortega, Tania Ofelia López Zeron, Luis Alejandro Santana Valadez, Efraín Mohedano Torres, Marcelo Quezada Quiterio, Arizbeth Escudero Hernández
Abstract: Direct product reviews on e-commerce platforms provide information about consumer experiences, but their use in marketing decisions requires connecting heterogeneous inputs, aspect-level analysis, and...
Application of Design Thinking to Develop an Ergonomic Auxiliary for Heavy Mold Handling in Injection Molding Operations
Authors: Larissa Montserrat Pérez Avalos, Efraín Mohedano Torres, Rubén Dario Chávez Martínez, Karla Sherlyn Soní Ramírez, Arlet Munguia Magdaleno, Jacqueline Galindo García
Abstract: Manual handling of heavy molds in plastic injection molding operations constitutes a significant source of physical effort, fatigue, and musculoskeletal risk for machine operators. Molds typically wei...
Development and Preliminary Evaluation of a Poka-Yoke Support Hook for Brake Calipers During Brake Pad Replacement
Authors: Héctor Luis Gutiérrez Martínez, Emilio Merlo Peña, Jesús Sebastián Badillo Lara, María Fernanda Ramos González, Emanuel Lango Fragoso, Jaime Brayan Cruz Ortiz
Abstract: Temporarily supporting a removed brake caliper is a necessary part of brake maintenance because the hydraulic hose must not serve as a suspension element. This study examines the design of a caliper s...
Design of a Proactive Network Connection Incident Monitoring System Using an Android Mobile Application and the Design Thinking Methodology in Industrial Environments
Authors: Arizbeth Escudero Hernández, Alyn Michel Fernández Escudero, Enrique de Jesús Mohedano Torres, Gloria Sandoval Méndez, Gabriela Calva Arcega, Karla Sherlyn Soní Ramírez
Abstract: Within Industry 4.0 and the IT/OT convergence, continuous network connectivity monitoring is essential for operational continuity. According to Siemens/Senseye (2024), Fortune Global 500 companies los...
Application of Just-In-Time, EOQ, and Kanban to Reduce Shortages and Rework in the Packaging of Fragile Merchandise
Authors: Mariana Paola Alvarez Cordova, Alfonso Ávila Pérez Tagle, Guadalupe Ibarra Huesca, Lucero Hernández Otero, Efraín Mohedano Torres, Karen Lilian Gómez Barbosa
Abstract: In manufacturing environments that handle fragile merchandise, deficiencies in the internal supply of packaging and packing materials frequently generate stockouts, waiting times, rework, and interrup...
Perceptions of Gambling Disorder Among University Students in Hidalgo: An Exploratory Study Based on the Health Belief Model
Authors: Jennifer Palacios Ramírez, Andrés Alberto Hernández López, Josué Rafael Hernández García
Abstract: Online betting has become a relevant research topic due to its potential association with financial difficulties, emotional distress, and loss of control, particuularly among young people. Understandi...
Economic Impact of Implementing a PDCA-Based Traveler Sheet for Cost Reduction in a CNC Machining Area
Authors: Eric Suarez Cruz, Aiko Yolotzi Campos Reyes, Yanet Hernandez Ortega, Joselin Hernández Islas, Marcelo Quezada Quiterio, Arlet Munguia Magdaleno
Abstract: Manufacturing companies continuously seek strategies that improve operational efficiency while reducing production costs and increasing profitability. However, the absence of standardized production c...
Planning Model Based on Demand Forecasting and ABC Classification: A Comparative Study of Two Branches of a Food-Sector MSME
Authors: Domingo Noé Marrón Ramos, Mayra Lorena González Mosqueda, Mishell Ferran Zúñiga Hernández, Karen Lilian Gómez Barbosa, Manuel Horacio Gutiérrez Martínez, Abril Cadena Martínez
Abstract: Inventory management is essential to the operational efficiency of micro, small and medium-sized nventory management remains a critical challenge for micro, small and medium-sized enterprises (MSMEs) ...
Sustainable Industrial Engineering: Integrating Innovation, Production Efficiency and Human Well-Being from an International Perspective
Authors: Manuel Horacio Gutiérrez Martínez, Uriel Noe Marrón Hernández, Héctor Luis Gutiérrez Martínez, Enrique de Jesús Mohedano Torres, Elsa Dariana Méndez Almanza, Dennisse Hernández Cruz
Abstract: Industrial engineering faces the challenge of improving the productivity of manufacturing organizations without neglecting its environmental and human effects. This article analyzes, from an internati...
Generative Artificial Intelligence Among Business Management Engineering Students: Academic Uses, Learning, and Responsible Practices
Authors: Morayma Georgina Muñoz Orán, Mayra Lorena González Mosqueda, Enrique de Jesús Mohedano Torres, Karla Martínez Tapia, Domingo Noé Marrón Ramos
Abstract: Generative artificial intelligence (GenAI) is already part of many students’ academic activities, but it remains necessary to understand what they use it for, how they learned to use it, and what re...
Generative Artificial Intelligence as Technological Innovation in Higher Education: Literacy, Technopedagogical Knowledge, and Faculty Integration
Authors: Morayma Georgina Muñoz Orán, Karla Martínez Tapia, Enrique J. Mohedano Torres, Mayra Lorena González Mosqueda, Alfonso Ávila-Pérez Tagle
Abstract: Generative artificial intelligence (GenAI) represents a technological innovation with potential to support planning, material production, feedback, and activity design in higher education. However, pe...
Additive Manufacturing of a Monomaterial TPU Exoskeleton for Rheumatoid Arthritis: Fabrication Strategy and Preliminary Evaluation
Authors: Héctor Luis Gutiérrez Martínez, Enrique de Jesús Mohedano Torres, Camila Durán Latorre, María Fernanda Carmona Martínez, Emilio Merlo Peña, Diana Isabel Rodríguez Trejo
Abstract: [Rheumatoid arthritis (RA) progressively impairs hand mobility and limits daily activities, and commercial orthoses are often rigid, poorly fitted, or costly. Previous work proposed a customized monom...
Application of SIPOC and Resource Planning Systems to Reduce Demurrage Costs and Yard Saturation in Container Discharge Operations
Authors: Abril Cadena Martínez, Luis David Echenique Lima, Luis Alejandro Santana Valadez, Gloria Gálvez Cerón, Morales Montaño Karina, Samantha Chang Reyes
Abstract: In high-volume manufacturing plants that rely on continuous imports of raw materials and components, inefficiencies in the container unloading process frequently generate yard congestion, delayed empt...
Usability-Focused and Eco-Design for the Development of an Interior Partition Panel Made from Recycled Polylaminate.
Authors: Rubén Darío Chávez Martínez, Karina Morales Montaño, Islas Bautista Juan Diego, Enrique Jesús Mohedano Torres, Samantha Chang Reyes, Edgar Lozano Bautista
Abstract: The development of remote work and home office arrangements has increased the need to adapt interior spaces for work activities. At the same time, post-consumer multilayer packaging presents recycling...
Development of a Modular, Wheelchair-Accessible Desk Using Design Thinking and User-Centered Design (UCD).
Authors: Karina Morales Montaño, Rubén Darío Chávez Martínez, Jacqueline Galindo García, José Damian Pérez Zaragoza, Enrique Jesús Mohedano Torres, Aida Yadira Rodriguez Conde
Abstract: Conventional desks are designed around fixed dimensions and lower structural elements that can hinder frontal approach, reach, and comfortable posture for wheelchair users, limiting their participatio...
Optimizing Last-Mile Distribution Through Route Consolidation in Manufacturing Smes: An Applied Study Using the Clarke-Wright Algorith
Authors: Joselin Hernández Islas, Nahum Aguilar Pérez, Lesly Anahi Barrera Pacheco, Pedro Alberto Piñón Domínguez, Alfredo Meneses Gutiérrez, Gabriela Calva Arcega
Abstract: Last-mile transportation is one of the most costly components of manufacturing logistics, with particularly pronounced inefficiencies in small and medium-sized enterprises (SMEs) in emerging economies...
Desarrollo De Un Sistema Inteligente Para El Monitoreo De Fertilizantes Y Biofertilizantes Mediante Sensores E Integración De Una API
Authors: Jiménes Lora Alexa Mariana, Vera Hidalgo Daralyn, Hernández Gamboa Karina, Escárcega Cruz Marlene, Samperio Lascano Melisa
Abstract: Climate change and population growth have increased dramatically, and with them, food needs—requiring a 60% increase in agricultural production in the coming years. In response, technological soluti...
Reduction of Operational Times in Talent Recruitment through Process Analysis and Automation of Comparative Matrices
Authors: Samantha Chang Reyes, Zulet Camargo Melquiades, Karla Martínez Tapia, Víctor Olvera Camarillo, Tania Ofelia López Zeron, Vannia Martínez Luna
Abstract: Recruitment and selection processes continue to rely heavily on manual activities in many industrial and service organizations, generating high cycle times, administrative rework, and inconsistent dec...
Design Thinking and Simulation for the Development of Protective Packaging for Industrial Components in a Railway Manufacturing Company
Authors: Aimee Xiadani Valencia Torres, Francisco Alfonso Chiapa Téllez, Luis Alejandro Santana Valadez, Nancy Valdez García, Morayma Georgina Muñoz Orán, Vannia Martínez Luna
Abstract: Inadequate packaging of industrial components frequently results in mechanical damage, elevated scrap rates, rework, and production delays, generating both direct and hidden costs. This applied resear...
Institutional Accompaniment and the Formalization of An Artisanal Mole Microenterprise in Hidalgo, Mexico: An Evaluative Case Study
Authors: Dayra Paola Pérez Antonio, Mayra Lorena González Mosqueda, Morayma Georgina Muñoz Oran, Enrique Jesús Mohedano Torres, Karla Martínez Tapia
Abstract: In 2024, the informally employed population accounted for 54.4% of employment in Mexico and generated 25.4% of gross domestic product; in the state of Hidalgo, labor informality exceeds 71%. Informali...
DMADV Methodology in Talent Retention Management: A Systematic Literature Review and Analysis of Techniques (2016–2026)
Authors: Darinka Hernández Gamiño, Lesly Anahi Barrera Pacheco, Larissa Montserrat Pérez Avalos, Joselin Hernández Islas, Erik Rodríguez Soto, Ximena Lidian Jiménez Campero
Abstract: Employee turnover represents one of the most costly and persistent challenges in contemporary organizations, particularly in manufacturing and industrial settings in Mexico and Latin America, where an...